How To Blow Out Inground Pool Lines For Winter?

How to Blow Out Inground Pool Lines for Winter

The winter months can be tough on inground pools. With the cold weather and snow, it’s important to take steps to protect your pool from damage. One of the most important things you can do is to blow out the pool lines. This will help to prevent water from freezing inside the pipes and causing them to burst.

Blowing out your pool lines is a relatively simple process, but it’s important to do it correctly. In this article, we’ll walk you through the steps of blowing out your pool lines for winter. We’ll also provide some tips on how to winterize your pool overall.

So if you’re ready to protect your pool from the winter elements, read on!

Step	Instructions	Image
1	Turn off the pool pump and disconnect the hose from the skimmer.
2	Attach the air hose to the air valve on the pool pump.
3	Turn on the air compressor and allow it to blow air through the lines for several minutes.
4	Close the air valve and disconnect the air hose.
5	Cover the pool with a tarp or winter cover.

What is the purpose of blowing out pool lines?

Blowing out pool lines is a necessary step to winterize your pool. It helps to prevent damage to the pool’s plumbing system by removing any water that may be left in the pipes. This water can freeze and expand, causing the pipes to burst. Blowing out the lines also helps to prevent algae and other bacteria from growing in the pipes during the winter months.

When should you blow out pool lines?

The best time to blow out pool lines is in the fall, before the first frost. This will give you plenty of time to complete the process and ensure that your pool is properly winterized. If you live in an area with a mild climate, you may be able to get away with blowing out the lines in the spring. However, it is always better to err on the side of caution and blow out the lines in the fall.

How to blow out pool lines

Blowing out pool lines is a relatively simple process, but it is important to follow the steps carefully to avoid damaging the pool’s plumbing system.

1. Turn off the power to the pool pump. This will prevent the pump from starting up while you are blowing out the lines.
2. Locate the air valve on the pool’s filter. The air valve is usually located on the top of the filter.
3. Attach a garden hose to the air valve. Make sure that the hose is long enough to reach the furthest point of the pool plumbing system.
4. Turn on the garden hose. The water from the hose will help to push the air through the lines and out of the pool.
5. Open the air valve. This will allow the air to escape from the lines.
6. Continue to blow out the lines until all of the water has been removed. You can check to see if all of the water has been removed by looking at the end of the garden hose. If there is no water coming out of the hose, then all of the water has been removed from the lines.
7. Turn off the garden hose and disconnect it from the air valve.
8. Turn on the power to the pool pump.

Troubleshooting

If you are having trouble blowing out the pool lines, there are a few things you can check to troubleshoot the problem.

• Make sure that the air valve is open.
• Make sure that the garden hose is connected to the air valve properly.
• Make sure that the garden hose is long enough to reach the furthest point of the pool plumbing system.
• Make sure that the pool pump is turned on.

If you have checked all of these things and you are still having trouble, you may need to call a professional pool technician to help you.

Blowing out pool lines is a simple but important step to winterizing your pool. By following these steps, you can help to prevent damage to your pool’s plumbing system and ensure that your pool is ready for the winter months.

How to blow out pool lines?

Blowing out your pool lines is an important part of winterizing your pool. This process removes any water that is left in the lines, which can help to prevent damage from freezing. It is also a good way to clean the lines and remove any debris that may have accumulated.

To blow out your pool lines, you will need the following materials:

• A garden hose
• A pressure washer
• A blower attachment for the pressure washer
• A bucket
• A hose clamp
• A garden hose shut-off valve

Step 1: Turn off the water to the pool.

The first step is to turn off the water to the pool. This can be done by turning off the main water valve or by turning off the water valve at the pool pump.

Step 2: Disconnect the hose from the pool pump.

Once the water to the pool is turned off, you can disconnect the hose from the pool pump. To do this, simply unscrew the hose clamp that is holding the hose in place.

Step 3: Attach the hose to the pressure washer.

Next, you will need to attach the hose to the pressure washer. To do this, simply screw the hose onto the pressure washer.

Step 4: Attach the blower attachment to the pressure washer.

Once the hose is attached to the pressure washer, you can attach the blower attachment. To do this, simply screw the blower attachment onto the end of the hose.

Step 5: Turn on the pressure washer.

Now that the blower attachment is attached to the pressure washer, you can turn on the pressure washer.

Step 6: Blow out the lines.

With the pressure washer turned on, you can begin to blow out the lines. To do this, simply hold the blower attachment over the pool return jets and turn on the blower. The air from the blower will push the water out of the lines and into the bucket.

Step 7: Repeat steps 5-6 until all of the lines are blown out.

Continue to blow out the lines until all of the water is out of the lines. You may need to repeat steps 5-6 several times to completely clear the lines.

Step 8: Turn off the pressure washer.

Once all of the lines are blown out, you can turn off the pressure washer.

Step 9: Reconnect the hose to the pool pump.

Now that the lines are blown out, you can reconnect the hose to the pool pump. To do this, simply screw the hose clamp back onto the hose.

Step 10: Turn on the water to the pool.

Finally, you can turn on the water to the pool. This will help to flush out any debris that may have been loosened during the blowing out process.

Tips for blowing out pool lines:

• If you have a long hose, you can use it to reach the pool return jets that are farthest away from the pressure washer.
• If you have a lot of lines to blow out, you can split the job into two or more sessions.
• Be careful not to point the blower attachment directly at yourself or anyone else. The air from the blower can be very powerful and can cause injury.
• If you have any trouble blowing out the lines, you can call a professional pool company for help.

What to do if you have trouble blowing out pool lines?

If you are having trouble blowing out your pool lines, there are a few things you can try.

• First, make sure that the pressure washer is turned on high enough. The air from the blower needs to be strong enough to push the water out of the lines.
• Second, make sure that the blower attachment is properly attached to the pressure washer. The air from the blower needs to be directed into the lines.
• Third, try blowing out the lines in a different direction. Sometimes, the water can get stuck in a particular section of the lines and it can be difficult to blow it out. By blowing out the lines in a different direction, you can sometimes free up the water and get it flowing out of the lines.
• If you are still having trouble blowing out the lines, you can call a professional pool company for help. They will be able to use specialized equipment to blow out the lines and get the job done quickly and efficiently.

Here are some additional tips for blowing out pool lines:

• If you have a lot of lines to blow out, you can split the job into two or more sessions. This will help to prevent fatigue and ensure that you get the job done properly.

How do I know if my pool lines need to be blown out?

• Answer: There are a few signs that your pool lines may need to be blown out, including:
• Your pool water is cloudy or murky.
• Your pool pump is running more often than usual.
• You see bubbles coming from the pool drain.
• Your pool water is not heating up as quickly as it should.

If you notice any of these signs, it’s a good idea to have your pool lines blown out.

When should I blow out my pool lines?

• Answer: The best time to blow out your pool lines is in the fall, before the weather gets too cold. This will help to prevent damage to your pool lines and equipment.

How do I blow out my pool lines?

• Answer: To blow out your pool lines, you will need:
• A garden hose with a pressure washer attachment
• A bucket
• A pool pump
• A hose clamp
• A length of PVC pipe

1. Turn off the power to your pool pump.
2. Disconnect the hose from the pool pump.
3. Attach the pressure washer attachment to the garden hose.
4. Turn on the water and adjust the pressure to a high setting.
5. Place the bucket under the pool drain.
6. Insert the PVC pipe into the hose clamp and attach it to the pool drain.
7. Turn on the pressure washer and allow it to run for several minutes.
8. Once the lines are clear, turn off the pressure washer and disconnect the hose.
9. Reconnect the hose to the pool pump and turn on the power.

What if I have a saltwater pool?

• Answer: If you have a saltwater pool, you will need to use a saltwater pool pump to blow out your lines. Saltwater pool pumps are designed to handle the high salt content of saltwater pools.

What if I have a concrete pool?

• Answer: If you have a concrete pool, you will need to take extra care when blowing out your lines. Concrete pools are more susceptible to damage than other types of pools, so it’s important to use a gentle touch when blowing out the lines.

What are the risks of not blowing out my pool lines?

• Answer: If you don’t blow out your pool lines, you could experience the following problems:
• Your pool water may become contaminated with bacteria and algae.
• Your pool pump may become damaged.
• Your pool lines may become blocked, which could prevent your pool from draining properly.
• Your pool may freeze during the winter, which could damage the pool structure.

How can I prevent my pool lines from freezing in the winter?

• Answer: To prevent your pool lines from freezing in the winter, you can:
• Blow out your pool lines before the weather gets too cold.
• Cover your pool with a tarp or cover.
• Insulate your pool pipes.
• Install a pool heater.

  blowing out your inground pool lines for winter is an important task that can help prevent damage to your pool and equipment. By following the steps outlined in this article, you can safely and effectively winterize your pool and enjoy it for many years to come.

Here are some key takeaways to remember:

• Turn off the power to your pool pump and filter.
• Disconnect the hose from the skimmer and blow out the line with compressed air.
• Repeat this process for all of the pool lines, including the main drain line.
• Close the winterizing valve on the main drain line.
• Add a winterizing chemical to your pool water to protect it from freezing.
• Cover your pool with a tarp or pool cover to prevent debris from entering the pool.

By following these steps, you can help ensure that your inground pool will be protected from the harsh winter weather and be ready to use again next season.