How To Change Theragun Head?

How to Change Theragun Head

Your Theragun is a powerful tool that can help you relieve muscle pain, soreness, and tension. But did you know that you can also change the head of your Theragun to target different areas of your body or to achieve different results?

In this article, we’ll show you how to change the head of your Theragun quickly and easily. We’ll also provide tips on choosing the right head for your needs.

So whether you’re new to the Theragun or you’re just looking to get the most out of yours, read on for all the information you need to know about changing Theragun heads.

Step	Instructions	Image
1	Turn off the Theragun and unplug it from the power outlet.
2	Unlock the head by pressing and holding the button on the back of the Theragun.
3	Rotate the head counterclockwise until it comes off.
4	Replace the head with the desired attachment.
5	Lock the head in place by pressing and holding the button on the back of the Theragun.

Theragun is a handheld percussive therapy device that helps to relieve muscle pain and soreness. It comes with a variety of interchangeable heads that can be used for different purposes. To get the most out of your Theragun, it’s important to know how to change the head. This guide will show you how to do just that.

Tools and Materials Needed

• Theragun
• Old Theragun head
• New Theragun head
• Phillips head screwdriver
• Wrench

Step-by-Step Instructions

1. Turn off the Theragun and unplug it from the power outlet.
2. Remove the old head by unscrewing the four screws that hold it in place.
3. Align the new head with the Theragun and screw it into place.
4. Tighten the screws until the head is secure.
5. Turn on the Theragun and test the new head.

Tips

• Be sure to use the correct size screwdriver for the screws on your Theragun head.
• Tighten the screws until the head is secure, but don’t overtighten them.
• If you’re having trouble removing the old head, you can use a hair dryer to heat it up. This will make the plastic more pliable and easier to remove.

Changing the head on your Theragun is a simple process that can be completed in a few minutes. By following these steps, you can ensure that your Theragun is always in top condition and that you’re getting the most out of it.

Additional Resources

• [Theragun Head Replacement Instructions](https://www.therapi.com/support/head-replacement-instructions)
• [Theragun Head Types](https://www.therapi.com/heads)

How to Change Theragun Head?

Theragun is a popular percussive massage device that can help relieve muscle pain, soreness, and stiffness. The device comes with a variety of interchangeable heads that can be used for different purposes. If you want to change the Theragun head, you can do so by following these steps:

1.Turn on the Theragun.

First, turn on the Theragun and select the desired speed setting.

2.Unlock the head.

To unlock the head, press and hold the power button for two seconds. The head will then release and you can remove it.

3.Turn off the Theragun.

Once you have removed the old head, turn off the Theragun.

4.Remove the old Theragun head by unscrewing the four screws on the bottom of the head.

The old head is held in place by four screws on the bottom of the head. Use a Phillips head screwdriver to unscrew the screws and remove the head.

5.Install the new Theragun head.

To install the new head, align the head with the Theragun and screw it in place. Make sure that the head is securely fastened before using the Theragun.

6.Turn on the Theragun and test the new head.

Once you have installed the new head, turn on the Theragun and test it out. Make sure that the head is working properly and that you are comfortable with the feel of it.

Changing the Theragun head is a simple process that can be completed in a few minutes. By following these steps, you can ensure that your Theragun is always working properly and that you are getting the most out of it.

How do I change the Theragun head?

1. Turn off the Theragun and unplug it from the power outlet.
2. Remove the old head by pressing down on the release button and twisting counterclockwise.
3. Align the new head with the Theragun and twist clockwise until it is secure.
4. Plug the Theragun back into the power outlet and turn it on.

What are the different types of Theragun heads?

The Theragun comes with three different heads:

• The standard ball head is designed for general massage.
• The cone head is designed for deep tissue massage.
• The thumb head is designed for trigger point therapy.

You can also purchase additional heads from the Theragun website or from authorized retailers.

How do I clean the Theragun head?

To clean the Theragun head, simply wipe it down with a damp cloth. Do not immerse the head in water or use any harsh chemicals.

How often should I change the Theragun head?

You should change the Theragun head when it becomes dirty or worn out. This is typically every 6-12 months, depending on how often you use the Theragun.

Can I use any Theragun head on my Theragun?

No, you can only use Theragun heads that are specifically designed for your Theragun model. Using the wrong head could damage your Theragun.

Where can I buy Theragun heads?

You can purchase Theragun heads from the Theragun website or from authorized retailers.

In this guide, we have shown you how to change the Theragun head. We hope that you have found this information helpful.

Here is a quick recap of the steps involved:

1. Turn off the Theragun and unplug it from the power outlet.
2. Remove the old head by pressing down on the release button and twisting it counterclockwise.
3. Align the new head with the Theragun and twist it clockwise until it is secure.
4. Plug the Theragun back into the power outlet and turn it on.

We recommend that you clean the Theragun head after each use to prevent the build-up of dirt and bacteria. You can clean the head with a damp cloth or by wiping it with a 70% isopropyl alcohol solution.

Be sure to read the Theragun user manual for more information on how to use and care for your device.

Key takeaways:

• To change the Theragun head, turn off the device and unplug it from the power outlet.
• Remove the old head by pressing down on the release button and twisting it counterclockwise.
• Align the new head with the Theragun and twist it clockwise until it is secure.
• Plug the Theragun back into the power outlet and turn it on.
• Clean the Theragun head after each use to prevent the build-up of dirt and bacteria.