How To Clean A Shark Navigator Vacuum?

How to Clean a Shark Navigator Vacuum

Your Shark Navigator vacuum cleaner is a powerful tool that can help you keep your home clean and free of dust, dirt, and allergens. But even the best vacuum cleaners need to be cleaned regularly to maintain their performance.

This comprehensive guide will show you how to clean your Shark Navigator vacuum in just a few simple steps. We’ll cover everything from removing the dust cup and filter to cleaning the brush roll and hose. By the end of this guide, your Shark Navigator vacuum will be sparkling clean and ready to tackle any mess.

So what are you waiting for? Let’s get started!

Step	Instructions	Image
1	Unplug the vacuum cleaner.
2	Remove the dust cup and empty it into the trash.
3	Remove the brush roll and clean it with a dry cloth.
4	Wipe down the inside of the vacuum cleaner with a damp cloth.
5	Reattach the dust cup and brush roll.

How To Clean A Shark Navigator Vacuum?

Preparation

Before you begin cleaning your Shark Navigator vacuum, gather the following supplies:

• A dry cloth
• A vacuum cleaner hose brush
• A vacuum cleaner attachment brush
• A vacuum cleaner crevice tool
• A vacuum cleaner upholstery brush
• A vacuum cleaner dust brush
• A vacuum cleaner wet/dry vac
• A bucket of warm water
• A mild detergent
• A pair of rubber gloves

Turn Off the Vacuum and Unplug It

Before you can clean your Shark Navigator vacuum, you must first turn it off and unplug it. This will prevent you from accidentally starting the vacuum while you are cleaning it.

Remove the Dust Cup and Filter

The next step is to remove the dust cup and filter from the vacuum. To do this, locate the dust cup release button on the side of the vacuum. Press the button and the dust cup will pop open. Remove the dust cup and set it aside.

Cleaning the Dust Cup

The dust cup is one of the most important parts of your vacuum cleaner. It collects all of the dirt, dust, and debris that you vacuum up. It is important to clean the dust cup regularly to prevent it from becoming clogged.

To clean the dust cup, empty it into the trash. Then, rinse the dust cup with warm water. Be sure to rinse the dust cup thoroughly to remove all of the dirt and debris.

Drying the Dust Cup Thoroughly

After you have rinsed the dust cup, it is important to dry it thoroughly. A damp dust cup can harbor bacteria and mold. To dry the dust cup, place it in a well-ventilated area and allow it to air dry completely.

Cleaning the Filter

The filter is another important part of your vacuum cleaner. It helps to clean the air that is being sucked into the vacuum cleaner. It is important to clean the filter regularly to prevent it from becoming clogged.

To clean the filter, remove it from the vacuum cleaner. Then, rinse the filter with warm water. Be sure to rinse the filter thoroughly to remove all of the dirt and debris.

Cleaning the Brushroll

The brushroll is the part of the vacuum cleaner that actually does the cleaning. It is important to clean the brushroll regularly to prevent it from becoming clogged.

To clean the brushroll, remove it from the vacuum cleaner. Then, use a vacuum cleaner hose brush to brush away any dirt or debris that is stuck to the brushroll.

Cleaning the Crevice Tool

The crevice tool is a small, narrow attachment that is used to clean tight spaces. It is important to clean the crevice tool regularly to prevent it from becoming clogged.

To clean the crevice tool, remove it from the vacuum cleaner. Then, use a vacuum cleaner attachment brush to brush away any dirt or debris that is stuck to the crevice tool.

Cleaning the Upholstery Brush

The upholstery brush is a soft, round attachment that is used to clean upholstery. It is important to clean the upholstery brush regularly to prevent it from becoming clogged.

To clean the upholstery brush, remove it from the vacuum cleaner. Then, use a vacuum cleaner attachment brush to brush away any dirt or debris that is stuck to the upholstery brush.

Cleaning the Dust Brush

The dust brush is a small, soft brush that is used to clean delicate surfaces. It is important to clean the dust brush regularly to prevent it from becoming clogged.

To clean the dust brush, remove it from the vacuum cleaner. Then, use a dry cloth to wipe away any dirt or debris that is stuck to the dust brush.

Cleaning the Wet/Dry Vac

The wet/dry vac is a powerful tool that can be used to clean up spills and messes. It is important to clean the wet/dry vac regularly to prevent it from becoming clogged.

To clean the wet/dry vac, empty the water tank and dispose of the contents. Then, rinse the water tank with warm water. Be sure to rinse the water tank thoroughly to remove all of the dirt and debris.

By following these steps, you can easily clean your Shark Navigator vacuum. A clean vacuum cleaner will perform better and will last longer.

Cleaning the Filter

The filter on your Shark Navigator vacuum is responsible for trapping dust, dirt, and other allergens. Over time, the filter can become clogged, which can reduce the efficiency of your vacuum. To keep your vacuum running at its best, it’s important to clean the filter regularly.

To clean the filter, follow these steps:

1. Remove the filter from the vacuum. The filter is usually located on the back of the vacuum. To remove it, simply unclip the tabs on the sides of the filter and pull it out.
2. Wash the filter in warm, soapy water. Be sure to rinse the filter thoroughly to remove all of the soap.
3. Dry the filter completely. You can dry the filter by air-drying it or by using a hair dryer on low heat.
4. Reinsert the filter into the vacuum. Once the filter is dry, reinsert it into the vacuum.

Cleaning the Vacuum Head

The vacuum head on your Shark Navigator vacuum is responsible for picking up dirt and debris from your floors. Over time, the vacuum head can become clogged with hair, dust, and other debris. To keep your vacuum head working properly, it’s important to clean it regularly.

To clean the vacuum head, follow these steps:

1. Remove the vacuum head from the vacuum. The vacuum head is usually located on the front of the vacuum. To remove it, simply unclip the tabs on the sides of the vacuum head and pull it out.
2. Wipe the vacuum head with a dry cloth. This will remove any loose dirt or debris.
3. Clean the brush roll with a brush or a vacuum cleaner brush. Be sure to clean the brush roll thoroughly to remove all of the hair and debris.
4. Reinsert the vacuum head into the vacuum. Once the vacuum head is clean, reinsert it into the vacuum.

Cleaning the Hose

The hose on your Shark Navigator vacuum is responsible for connecting the vacuum head to the vacuum cleaner. Over time, the hose can become clogged with dirt, dust, and other debris. To keep your vacuum hose working properly, it’s important to clean it regularly.

To clean the hose, follow these steps:

1. Remove the hose from the vacuum. The hose is usually located on the back of the vacuum. To remove it, simply unclip the tabs on the sides of the hose and pull it out.
2. Wash the hose in warm, soapy water. Be sure to rinse the hose thoroughly to remove all of the soap.
3. Dry the hose completely. You can dry the hose by air-drying it or by using a hair dryer on low heat.
4. Reinsert the hose into the vacuum. Once the hose is dry, reinsert it into the vacuum.

Cleaning the Base

The base of your Shark Navigator vacuum is where the dust and debris collect. Over time, the base can become clogged with dirt, dust, and other debris. To keep your vacuum base working properly, it’s important to clean it regularly.

To clean the base, follow these steps:

1. Remove the dust cup from the base. The dust cup is usually located on the bottom of the vacuum. To remove it, simply unclip the tabs on the sides of the dust cup and pull it out.
2. Empty the dust cup. Be sure to empty the dust cup into a trash can.
3. Wash the dust cup in warm, soapy water. Be sure to rinse the dust cup thoroughly to remove all of the soap.
4. Dry the dust cup completely. You can dry the dust cup by air-drying it or by using a hair dryer on low heat.
5. Reinsert the dust cup into the base. Once the dust cup is dry, reinsert it into the base.

By following these steps, you can keep your Shark Navigator vacuum clean and running at its best. A clean vacuum will not only pick up dirt and debris more effectively, but it will also last longer.

How often should I clean my Shark Navigator vacuum?

A: You should clean your Shark Navigator vacuum every 2-3 months, or more often if you have pets or allergies.

What do I need to clean my Shark Navigator vacuum?

A: You will need:

• A dry microfiber cloth
• A vacuum cleaner hose attachment
• A vacuum cleaner brush attachment
• A vacuum cleaner crevice tool
• A vacuum cleaner dusting brush
• A vacuum cleaner shampoo solution
• A vacuum cleaner water tank
• A vacuum cleaner floor brush

How do I clean the dustbin on my Shark Navigator vacuum?

A: To clean the dustbin on your Shark Navigator vacuum:

1. Unplug the vacuum cleaner.
2. Remove the dustbin from the vacuum cleaner.
3. Open the dustbin lid.
4. Use the dry microfiber cloth to wipe out the inside of the dustbin.
5. Use the vacuum cleaner hose attachment to remove any remaining dirt or debris from the dustbin.
6. Replace the dustbin lid.
7. Reattach the dustbin to the vacuum cleaner.

How do I clean the filters on my Shark Navigator vacuum?

A: To clean the filters on your Shark Navigator vacuum:

1. Unplug the vacuum cleaner.
2. Remove the dustbin from the vacuum cleaner.
3. Remove the filters from the dustbin.
4. Rinse the filters under warm water.
5. Dry the filters completely with a dry microfiber cloth.
6. Reattach the filters to the dustbin.
7. Reattach the dustbin to the vacuum cleaner.

How do I clean the brush roll on my Shark Navigator vacuum?

A: To clean the brush roll on your Shark Navigator vacuum:

1. Unplug the vacuum cleaner.
2. Remove the brush roll from the vacuum cleaner.
3. Use the vacuum cleaner brush attachment to remove any hair or debris from the brush roll.
4. Use the vacuum cleaner crevice tool to clean out any remaining dirt or debris from the brush roll.
5. Reattach the brush roll to the vacuum cleaner.

How do I clean the headlights on my Shark Navigator vacuum?

A: To clean the headlights on your Shark Navigator vacuum:

1. Unplug the vacuum cleaner.
2. Use a dry microfiber cloth to wipe down the headlights.
3. Use a vacuum cleaner hose attachment to remove any remaining dirt or debris from the headlights.

How do I clean the body of my Shark Navigator vacuum?

A: To clean the body of your Shark Navigator vacuum:

1. Unplug the vacuum cleaner.
2. Use a dry microfiber cloth to wipe down the body of the vacuum cleaner.
3. Use a vacuum cleaner hose attachment to remove any remaining dirt or debris from the body of the vacuum cleaner.

cleaning your Shark Navigator vacuum is a simple task that can be completed in a few minutes. By following the steps outlined in this guide, you can keep your vacuum running at its best and ensure that it is providing you with the clean, comfortable home you deserve.

Here are the key takeaways from this guide:

• To clean the Shark Navigator vacuum, remove the dust cup and wash it with warm, soapy water.
• Clean the filters by vacuuming them with the brush attachment or by washing them in warm, soapy water.
• Wipe down the exterior of the vacuum with a dry cloth.
• Inspect the vacuum for any damage and repair or replace parts as needed.

By following these simple steps, you can keep your Shark Navigator vacuum running like new for years to come.