How To Winterize John Deere Riding Mower?

How to Winterize Your John Deere Riding Mower

The winter months can be tough on your John Deere riding mower. With the cold weather, snow, and ice, it’s important to take steps to protect your mower from damage. Winterizing your mower will help it start up easier in the spring and extend its life.

In this article, we’ll walk you through the steps of winterizing your John Deere riding mower. We’ll cover everything from draining the fuel tank to storing the mower in a safe place. So, if you’re ready to protect your mower from the winter elements, read on!

Step Instructions Image
1 Remove the grass catcher and empty the grass bag.
2 Clean the deck of the mower with a stiff brush and warm, soapy water.
3 Inspect the mower for any damage and repair as needed.
4 Apply a coat of oil to the moving parts of the mower.
5 Fill the fuel tank with fresh gasoline.
6 Park the mower in a level spot and cover it with a tarp.

How To Winterize John Deere Riding Mower?

Step 1: Prepare the Mower for Storage

Before you put your John Deere riding mower away for the winter, it’s important to prepare it for storage. This will help to protect the mower from damage and ensure that it starts up properly next spring.

Drain the fuel tank. The first step is to drain the fuel tank. This will help to prevent the fuel from evaporating and gumming up the carburetor. To do this, locate the fuel tank drain valve and open it. Allow all of the fuel to drain out of the tank.

Clean the mower deck. The next step is to clean the mower deck. This will help to remove any dirt, grass, or debris that may have accumulated on the deck during the mowing season. To do this, use a garden hose to rinse the deck thoroughly. You may also want to use a degreaser to remove any stubborn dirt or grime.

Inspect the mower for any damage. Once the mower is clean, take a close look at it for any damage. Look for cracks in the body, loose or damaged belts, and any other signs of wear and tear. If you find any damage, it’s important to repair it before storing the mower.

Lubricate the mower’s moving parts. The final step is to lubricate the mower’s moving parts. This will help to protect the parts from rust and corrosion. To do this, use a light oil or grease to lubricate the following parts:

  • The axles
  • The wheels
  • The blades
  • The deck
  • The engine

Step 2: Store the Mower in a Cool, Dry Place

Once the mower is prepared for storage, it’s time to store it in a cool, dry place. This will help to protect the mower from the elements and prevent it from being damaged.

Cover the mower with a tarp or cover. The first step is to cover the mower with a tarp or cover. This will help to protect the mower from dust, dirt, and other debris. Make sure that the cover is securely fastened so that it doesn’t blow off in the wind.

Store the mower in a garage or shed. The best place to store your mower is in a garage or shed. This will provide the mower with a sheltered environment that is protected from the elements. If you don’t have a garage or shed, you can also store the mower in a covered porch or under a tarp.

By following these steps, you can help to protect your John Deere riding mower from damage and ensure that it starts up properly next spring.

Here are some additional tips for winterizing your mower:

  • If you live in an area with heavy snowfall, you may want to remove the snow from the mower’s deck before storing it. This will help to prevent the snow from melting and damaging the deck.
  • If you’re not going to be using your mower for an extended period of time, you may want to disconnect the battery. This will help to prevent the battery from draining and going bad.
  • Be sure to read the owner’s manual for your specific model of mower for more specific winterizing instructions.

Step 3: Prepare the Mower for Spring

Once the winter weather has passed, it’s time to prepare your John Deere riding mower for spring. This involves a few simple steps:

  • Check the battery for a charge. If the battery is dead, you’ll need to charge it before you can use the mower. You can do this by connecting the battery to a charger or by jumping it with another vehicle.
  • Inspect the mower for any damage. Look for signs of rust, cracks, or other damage. If you find any damage, you’ll need to repair it before you can use the mower.
  • Replace any worn or damaged parts. This includes things like the blades, belts, and tires. It’s important to replace these parts with genuine John Deere parts to ensure that your mower performs properly.
  • Refill the fuel tank. Make sure that the fuel tank is full before you start using the mower. You should also use fresh fuel, as old fuel can cause problems with the engine.

Once you’ve completed these steps, your John Deere riding mower is ready for spring. You can now start mowing your lawn and enjoying the outdoors.

Step 4: Start the Mower and Let It Run for a Few Minutes

Before you start mowing your lawn, it’s important to start the mower and let it run for a few minutes. This will help to circulate the oil and prevent rust.

To start the mower, follow these steps:

1. Turn the key to the “On” position.
2. Press the primer bulb two or three times.
3. Pull the starter rope until the engine starts.

Once the engine is started, let it run for a few minutes before you start mowing. This will help to circulate the oil and prevent rust.

Here are a few tips for starting your John Deere riding mower:

  • Make sure that the choke is in the “On” position when you start the engine.
  • If the engine doesn’t start after a few pulls, try turning the choke to the “Off” position and pulling the starter rope again.
  • If the engine still doesn’t start, you may need to have it serviced.

By following these steps, you can winterize your John Deere riding mower and prepare it for spring. This will help to ensure that your mower performs properly and lasts for many years to come.

How do I winterize my John Deere riding mower?

1. Prepare the mower for storage.

  • Clean the mower thoroughly, inside and out.
  • Inspect the mower for any damage and repair any problems before storing it.
  • Change the oil and filter.
  • Drain the fuel tank and carburetor.
  • Disconnect the spark plug wire.
  • Cover the mower with a tarp or cover.

2. Store the mower in a cool, dry place.

  • The ideal storage temperature is between 50F and 70F.
  • The mower should be stored in a place that is free from moisture and pests.

What should I do if my John Deere riding mower won’t start after winterizing it?

1. Check the battery. Make sure the battery is charged and in good condition.
2. Check the spark plug. Make sure the spark plug is clean and properly gapped.
3. Check the fuel system. Make sure the fuel tank is full and the fuel lines are clear.
4. Try starting the mower again. If the mower still won’t start, take it to a qualified John Deere dealer for service.

What are the benefits of winterizing my John Deere riding mower?

  • Winterizing your mower will help to protect it from the elements and prevent damage.
  • Winterizing your mower will make it easier to start next spring.
  • Winterizing your mower will help to improve its performance.

**How often should I winterize my John Deere riding mower?

You should winterize your John Deere riding mower before storing it for the winter.

winterizing your John Deere riding mower is a relatively simple process that can help protect your investment and ensure that it starts up properly next spring. By following the steps outlined in this guide, you can help extend the life of your mower and keep it running smoothly for years to come.

Here are a few key takeaways to remember:

  • Drain the fuel tank and oil reservoir. This will help prevent the fuel from becoming stale and the oil from thickening.
  • Clean the air filter and spark plug. This will help ensure that the engine runs smoothly and efficiently.
  • Apply a coat of grease to the moving parts. This will help protect the parts from rust and corrosion.
  • Store the mower in a cool, dry place. This will help prevent the battery from discharging and the engine from freezing.

By following these simple steps, you can help winterize your John Deere riding mower and keep it in good condition for years to come.

Author Profile

Carla Denker
Carla Denker
Carla Denker first opened Plastica Store in June of 1996 in Silverlake, Los Angeles and closed in West Hollywood on December 1, 2017. PLASTICA was a boutique filled with unique items from around the world as well as products by local designers, all hand picked by Carla. Although some of the merchandise was literally plastic, we featured items made out of any number of different materials.

Prior to the engaging profile in west3rdstreet.com, the innovative trajectory of Carla Denker and PlasticaStore.com had already captured the attention of prominent publications, each one spotlighting the unique allure and creative vision of the boutique. The acclaim goes back to features in Daily Candy in 2013, TimeOut Los Angeles in 2012, and stretched globally with Allure Korea in 2011. Esteemed columns in LA Times in 2010 and thoughtful pieces in Sunset Magazine in 2009 highlighted the boutique’s distinctive character, while Domino Magazine in 2008 celebrated its design-forward ethos. This press recognition dates back to the earliest days of Plastica, with citations going back as far as 1997, each telling a part of the Plastica story.

After an illustrious run, Plastica transitioned from the tangible to the intangible. While our physical presence concluded in December 2017, our essence endures. Plastica Store has been reborn as a digital haven, continuing to serve a community of discerning thinkers and seekers. Our new mission transcends physical boundaries to embrace a world that is increasingly seeking knowledge and depth.

Similar Posts