How To Take Apart Kohler Kitchen Faucet Spray Head?

ByCarla Denker Blog

How to Take Apart a Kohler Kitchen Faucet Spray Head

Your Kohler kitchen faucet spray head is a convenient way to rinse dishes, clean the sink, or fill a pot with water. But what happens when the spray head starts to leak or the water flow becomes weak? In most cases, the problem can be fixed by simply taking apart the spray head and cleaning it.

This guide will show you how to take apart a Kohler kitchen faucet spray head in just a few simple steps. By the end, you’ll be able to keep your faucet in top condition and avoid costly repairs.

Steps:

1. Turn off the water supply to the faucet.
2. Remove the decorative cap from the spray head.
3. Unscrew the retaining ring that holds the spray head in place.
4. Pull the spray head straight up and off of the faucet.
5. Clean the spray head and the faucet spout with a soft cloth and warm, soapy water.
6. Reassemble the spray head and replace the decorative cap.

Tips:

  • If the spray head is stuck, you can try using a hair dryer to heat it up. This will make the plastic more pliable and easier to remove.
  • Be careful not to damage the o-rings when you’re reassembling the spray head. These o-rings create a seal that prevents water from leaking.
  • If you’re not comfortable taking apart the spray head yourself, you can always call a plumber.

    Step Instructions Image
    1 Turn off the water supply to the faucet.
    2 Locate the screw or nut that holds the spray head in place.
    3 Use a screwdriver to loosen the screw or nut.
    4 Gently pull the spray head off of the faucet.
    5 Clean the spray head with warm, soapy water.
    6 Reattach the spray head to the faucet.

    Tools and Materials Needed

    To remove the spray head from a Kohler kitchen faucet, you will need the following tools and materials:

    • A flathead screwdriver
    • A Phillips head screwdriver
    • A basin wrench
    • A bucket
    • A rag
    • Penetrating oil

    Steps to Remove the Spray Head

    1. Turn off the water supply to the faucet.
    2. Remove the aerator from the faucet spout.
    3. Loosen the setscrew that holds the spray head in place.
    4. Use the basin wrench to loosen the nut that holds the spray head in place.
    5. Carefully remove the spray head from the faucet.
    6. Clean the spray head and the faucet spout with a rag and some warm, soapy water.
    7. Reinstall the spray head and the aerator.
    8. Turn on the water supply to the faucet and test the spray head.

    Tips for Removing a Stuck Spray Head

    If the spray head is stuck, you can try the following tips:

    • Apply a penetrating oil to the setscrew and nut.
    • Use a heat gun to warm up the spray head.
    • Use a hammer and chisel to gently tap on the spray head.
    • If all else fails, you may need to replace the spray head.

    Removing the spray head from a Kohler kitchen faucet is a relatively simple task. By following the steps in this guide, you can easily remove the spray head and clean it or replace it.

    How to Take Apart Kohler Kitchen Faucet Spray Head

    Kohler kitchen faucets are known for their durability and dependability. However, even the best faucets can eventually become clogged or damaged. If your Kohler kitchen faucet spray head is not working properly, you may need to take it apart to clean it or repair it.

    This guide will show you how to take apart a Kohler kitchen faucet spray head. It is important to note that this guide is for Kohler faucets with a removable spray head. If your faucet does not have a removable spray head, you will not be able to follow these instructions.

    Tools and Materials

    • Flat-head screwdriver
    • Phillips head screwdriver
    • Penetrating oil
    • Rag
    • Bowl of warm water

    Step 1: Turn Off the Water Supply

    Before you begin, you need to turn off the water supply to your faucet. This will prevent any water from coming out of the faucet while you are working on it.

    To turn off the water supply, locate the shut-off valve for your faucet. This valve is usually located near the base of the faucet. Turn the valve clockwise to turn off the water supply.

    Step 2: Remove the Spray Head

    Once the water supply is turned off, you can begin to remove the spray head. The spray head is usually held in place by a small screw or nut. Locate the screw or nut and use a flat-head screwdriver to loosen it.

    Once the screw or nut is loosened, you can carefully remove the spray head. Be careful not to drop the spray head, as it is a small and delicate part.

    Step 3: Clean the Spray Head

    Now that the spray head is removed, you can clean it. The spray head can be cleaned with a rag and warm water. You can also use a mild detergent if necessary.

    Be sure to rinse the spray head thoroughly after cleaning it. Dry the spray head with a rag before reattaching it to the faucet.

    Step 4: Reattach the Spray Head

    Once the spray head is clean, you can reattach it to the faucet. Align the spray head with the faucet and carefully screw it back into place.

    Be sure to tighten the screw or nut securely so that the spray head does not come loose.

    Step 5: Turn On the Water Supply

    Now that the spray head is reattached, you can turn on the water supply to your faucet. Test the spray head to make sure that it is working properly.

    If the spray head is not working properly, you may need to repeat these steps or contact a qualified plumber for assistance.

    How to Clean the Spray Head

    The spray head on your Kohler kitchen faucet can become clogged with mineral deposits and other debris over time. This can cause the spray head to underperform or even stop working altogether.

    To keep your spray head clean and functioning properly, you should clean it regularly. You can clean the spray head with a few simple household items.

    Tools and Materials

    • Vinegar
    • Baking soda
    • Rag
    • Bowl

    Step 1: Remove the Spray Head

    To clean the spray head, you first need to remove it from the faucet. To do this, follow the steps in the “How to Take Apart Kohler Kitchen Faucet Spray Head” guide.

    Step 2: Soak the Spray Head in Vinegar

    Once the spray head is removed, fill a bowl with vinegar. Place the spray head in the vinegar and let it soak for at least 30 minutes.

    The vinegar will help to dissolve the mineral deposits and other debris that are clogging the spray head.

    Step 3: Scrub the Spray Head

    After the spray head has soaked in the vinegar, use a rag to scrub it clean. Be sure to scrub all of the holes in the spray head.

    Step 4: Rinse the Spray Head

    Once the spray head is clean, rinse it thoroughly with water. Be sure to dry the spray head completely before reattaching it to the faucet.

    Step 5: Reattach the Spray Head

    Now that the spray head is clean, you can reattach it to the faucet. Follow the steps in the “How to Take Apart Kohler Kitchen Faucet Spray Head” guide to reattach the spray head.

    Step 6: Test the Spray Head

    Once the spray head is reattached, turn on the water supply to your faucet. Test the spray head to make sure that it is working properly.

    If the spray head is not working properly, you may need to repeat these steps or contact a qualified plumber

    How to Take Apart a Kohler Kitchen Faucet Spray Head?

    Q: What tools do I need?

    A: You will need a flathead screwdriver, a Phillips head screwdriver, and a basin wrench.

    Q: How do I remove the spray head?

    A: 1. Turn off the water supply to the faucet.
    2. Locate the small screw on the underside of the spray head.
    3. Use a flathead screwdriver to loosen the screw.
    4. Pull the spray head straight up and off of the faucet.

    Q: How do I remove the cartridge?

    A: 1. Turn off the water supply to the faucet.
    2. Remove the spray head.
    3. Locate the cartridge housing.
    4. Use a Phillips head screwdriver to remove the screws that hold the cartridge housing in place.
    5. Pull the cartridge housing straight up and off of the faucet.

    Q: How do I replace the cartridge?

    A: 1. Remove the old cartridge from the cartridge housing.
    2. Inspect the new cartridge for damage.
    3. Apply a thin coat of plumber’s grease to the O-rings on the new cartridge.
    4. Insert the new cartridge into the cartridge housing.
    5. Secure the cartridge housing in place with the screws.
    6. Reattach the spray head.
    7. Turn on the water supply to the faucet.

    Q: What if I have trouble removing the cartridge?

    A: If you are having trouble removing the cartridge, you can try using a heat gun or a hair dryer to warm up the cartridge housing. This will help to loosen the O-rings and make it easier to remove the cartridge.

    Q: What if I accidentally break the cartridge?

    If you accidentally break the cartridge, you will need to purchase a new one. You can find replacement cartridges at most home improvement stores.

    Q: How often should I clean my Kohler kitchen faucet spray head?

    You should clean your Kohler kitchen faucet spray head every few months to prevent build-up of calcium and mineral deposits. You can clean the spray head by removing it from the faucet and soaking it in a vinegar solution. You can also use a descaling solution to clean the spray head.

    In this blog post, we have discussed how to take apart a Kohler kitchen faucet spray head. We have provided step-by-step instructions, along with pictures, to help you safely and easily remove the spray head for cleaning or replacement. We hope that this information has been helpful.

    Here are some key takeaways:

    • Before you begin, make sure that the water supply to the faucet is turned off.
    • Use a Phillips head screwdriver to remove the screws that hold the spray head in place.
    • Carefully lift the spray head off of the faucet.
    • Clean the spray head with a soft cloth and warm, soapy water.
    • Reattach the spray head to the faucet and turn on the water supply.

    We hope that you found this information helpful. If you have any questions, please feel free to contact us.

    Author Profile

    Carla Denker
    Carla Denker
    Carla Denker first opened Plastica Store in June of 1996 in Silverlake, Los Angeles and closed in West Hollywood on December 1, 2017. PLASTICA was a boutique filled with unique items from around the world as well as products by local designers, all hand picked by Carla. Although some of the merchandise was literally plastic, we featured items made out of any number of different materials.

    Prior to the engaging profile in west3rdstreet.com, the innovative trajectory of Carla Denker and PlasticaStore.com had already captured the attention of prominent publications, each one spotlighting the unique allure and creative vision of the boutique. The acclaim goes back to features in Daily Candy in 2013, TimeOut Los Angeles in 2012, and stretched globally with Allure Korea in 2011. Esteemed columns in LA Times in 2010 and thoughtful pieces in Sunset Magazine in 2009 highlighted the boutique’s distinctive character, while Domino Magazine in 2008 celebrated its design-forward ethos. This press recognition dates back to the earliest days of Plastica, with citations going back as far as 1997, each telling a part of the Plastica story.

    After an illustrious run, Plastica transitioned from the tangible to the intangible. While our physical presence concluded in December 2017, our essence endures. Plastica Store has been reborn as a digital haven, continuing to serve a community of discerning thinkers and seekers. Our new mission transcends physical boundaries to embrace a world that is increasingly seeking knowledge and depth.

Similar Posts