How To Stop Auxiliary Heat From Coming On Honeywell Thermostat?

How to Stop Auxiliary Heat From Coming On Honeywell Thermostat

Your Honeywell thermostat is a great way to keep your home comfortable all year round. But what happens when the auxiliary heat comes on when you don’t want it to? This can be a frustrating problem, but it’s one that’s easy to fix.

In this article, we’ll show you how to stop auxiliary heat from coming on your Honeywell thermostat. We’ll cover the different reasons why auxiliary heat might be coming on, and we’ll give you step-by-step instructions on how to disable it.

So if you’re tired of your auxiliary heat kicking in when you don’t need it, read on!

Step	Instructions	Image
1	Turn off the thermostat.
2	Locate the auxiliary heat switch.
3	Turn off the auxiliary heat switch.
4	Turn on the thermostat.

3. How to Stop Auxiliary Heat From Coming On

Auxiliary heat is a backup heating system that kicks in when the main thermostat cannot keep the house warm. This can happen during a power outage or when the main thermostat is broken. Auxiliary heat can be expensive to run, so it is important to know how to stop it from coming on when it is not needed.

There are a few ways to stop auxiliary heat from coming on:

• Check the thermostat to make sure it is set to the correct temperature. If the thermostat is set too high, the auxiliary heat will come on to try to reach the desired temperature. Check the thermostat and make sure it is set to a temperature that is comfortable for you.
• Clean the thermostat coils to make sure they are free of dust and debris. If the thermostat coils are dirty, they may not be able to sense the temperature of the room correctly. This can cause the auxiliary heat to come on even when it is not needed. Clean the thermostat coils with a dry cloth or a vacuum cleaner.
• Replace the batteries in the thermostat if they are old or dead. If the batteries in the thermostat are old or dead, the thermostat may not be able to function properly. This can cause the auxiliary heat to come on even when it is not needed. Replace the batteries in the thermostat with new ones.

If you have tried all of these steps and the auxiliary heat is still coming on, you may need to call a qualified HVAC technician.

4. When to Use Auxiliary Heat

Auxiliary heat should only be used when the main thermostat is not able to keep the house warm. This may be necessary during a power outage or when the main thermostat is broken. Auxiliary heat can be expensive to run, so it is important to use it sparingly.

Here are some tips for when to use auxiliary heat:

• During a power outage. If you lose power, the main thermostat will not be able to function. This means that the auxiliary heat will need to be used to keep the house warm.
• When the main thermostat is broken. If the main thermostat is broken, it will not be able to control the temperature of the house. This means that the auxiliary heat will need to be used to keep the house warm.
• When the house is very cold. If the temperature outside is very cold, the main thermostat may not be able to keep the house warm. This means that the auxiliary heat will need to be used to keep the house warm.

It is important to note that auxiliary heat can be expensive to run. Therefore, it is important to only use it when it is necessary.

Auxiliary heat is a backup heating system that kicks in when the main thermostat cannot keep the house warm. This can happen during a power outage or when the main thermostat is broken. Auxiliary heat can be expensive to run, so it is important to know how to stop it from coming on when it is not needed.

There are a few ways to stop auxiliary heat from coming on:

• Check the thermostat to make sure it is set to the correct temperature.
• Clean the thermostat coils to make sure they are free of dust and debris.
• Replace the batteries in the thermostat if they are old or dead.
• If you have tried all of these steps and the auxiliary heat is still coming on, you may need to call a qualified HVAC technician.

Auxiliary heat should only be used when the main thermostat is not able to keep the house warm. This may be necessary during a power outage or when the main thermostat is broken. Auxiliary heat can be expensive to run, so it is important to use it sparingly.

How do I stop auxiliary heat from coming on my Honeywell thermostat?

There are a few ways to stop auxiliary heat from coming on your Honeywell thermostat.

1. Turn off the auxiliary heat setting. This is the most straightforward way to stop auxiliary heat from coming on. To do this, locate the auxiliary heat setting on your thermostat. It is typically a button or switch that is labeled “Aux Heat” or “E Heat.” Once you have located the setting, turn it off.
2. Adjust the thermostat’s temperature setting. If your thermostat is set to a temperature that is higher than the current room temperature, the auxiliary heat will come on to try to reach the desired temperature. To prevent this, lower the thermostat’s temperature setting until it is within a few degrees of the current room temperature.
3. Check the thermostat’s wiring. If the thermostat is wired incorrectly, it may be sending a signal to the auxiliary heat to come on even when it is not needed. To check the wiring, consult the thermostat’s installation instructions.
4. Call a qualified HVAC technician. If you have tried the above steps and the auxiliary heat is still coming on, it is possible that there is a problem with the thermostat or the HVAC system. In this case, it is best to call a qualified HVAC technician to diagnose and fix the problem.

What is auxiliary heat?

Auxiliary heat is a type of supplemental heat that is used to help heat a home when the main heat source is not enough. Auxiliary heat is typically electric or gas-powered, and it can be used in conjunction with a variety of different heating systems.

Why is auxiliary heat coming on?

There are a few reasons why auxiliary heat might be coming on.

• The thermostat is set to a temperature that is higher than the current room temperature.
• The thermostat is wired incorrectly.
• The main heat source is not working properly.
• There is a problem with the auxiliary heat unit itself.

How can I prevent auxiliary heat from coming on?

There are a few things you can do to prevent auxiliary heat from coming on.

• Set the thermostat to a temperature that is within a few degrees of the current room temperature.
• Make sure the thermostat is wired correctly.
• Have the main heat source checked by a qualified HVAC technician.
• Have the auxiliary heat unit checked by a qualified HVAC technician.

What are the signs of a problem with auxiliary heat?

There are a few signs that you may have a problem with your auxiliary heat unit.

• The auxiliary heat is coming on even when it is not needed.
• The auxiliary heat is not working properly.
• The auxiliary heat is making strange noises.
• The auxiliary heat is emitting a strange smell.

If you notice any of these signs, it is best to have the auxiliary heat unit checked by a qualified HVAC technician.

there are a few different ways to stop auxiliary heat from coming on your Honeywell thermostat. You can either adjust the thermostat settings, check the thermostat wiring, or replace the thermostat altogether. By following these steps, you can keep your home comfortable and save money on your energy bills.

Here are some key takeaways from this article:

• Auxiliary heat is a backup heating system that kicks in when the thermostat temperature drops below a certain point.
• There are a few different ways to stop auxiliary heat from coming on, including adjusting the thermostat settings, checking the thermostat wiring, or replacing the thermostat altogether.
• By following these steps, you can keep your home comfortable and save money on your energy bills.