How To Reset Rain Bird Sst Controller?

How to Reset Your Rain Bird SST Controller

Your Rain Bird SST controller is a powerful tool that can help you keep your lawn and garden well-watered. But what happens if the controller stops working properly? Or if you just want to start fresh with a new watering schedule? In this article, we’ll show you how to reset your Rain Bird SST controller in just a few simple steps.

We’ll also provide some tips on how to troubleshoot common problems with your controller, so you can get your sprinklers back up and running in no time.

So whether you’re a first-time user or you’re just looking for a refresher, read on for all the information you need to know about resetting your Rain Bird SST controller.

Step	Instructions	Image
1	Locate the reset button on the controller. It is a small, black button located near the top of the controller.
2	Press and hold the reset button for 5 seconds.
3	The controller will beep and the display will reset.

What is a Rain Bird SST Controller?

A Rain Bird SST controller is a programmable irrigation controller that allows you to control your sprinkler system from your smartphone or tablet. It features a large, easy-to-read display and a simple menu system that makes it easy to set up and use. The SST controller also includes a number of features that can help you save water, such as a rain delay feature and a water budget calculator.

How to Reset a Rain Bird SST Controller

If your Rain Bird SST controller is not working properly, you may need to reset it. Resetting the controller will restore it to its factory defaults, which may fix any problems that you are experiencing.

To reset a Rain Bird SST controller, follow these steps:

1. Locate the reset button on the controller. The reset button is usually located on the back of the controller.
2. Press and hold the reset button for 5 seconds.
3. The controller will beep and the display will be reset.

Step 1: Locate the Reset Button

The reset button on a Rain Bird SST controller is usually located on the back of the controller. It is a small, round button that is usually black or gray in color.

Step 2: Press and Hold the Reset Button

Once you have located the reset button, press and hold it for 5 seconds. The controller will beep and the display will be reset.

Step 3: Verify that the Controller has been Reset

After you have reset the controller, the display should be blank. If the display is not blank, you may need to repeat the steps above.

Resetting a Rain Bird SST controller is a simple process that can help you fix a variety of problems. If you are experiencing problems with your controller, resetting it is a good place to start.

How to Reset a Rain Bird SST Controller

This guide will show you how to reset a Rain Bird SST controller. This process is simple and can be completed in a few minutes.

Step 1: Locate the Reset Button

The reset button is located on the back of the controller. It is a small, black button with a white dot in the center.

Step 2: Press and Hold the Reset Button

Press and hold the reset button for 5 seconds. The controller will beep and the display will reset.

Step 3: Verify that the Controller is Reset

The controller will be reset when the display shows the current time and date.

Troubleshooting a Rain Bird SST Controller

If the controller is not resetting, there may be a problem with the power supply.

• Check the power cord. Make sure that the power cord is plugged into the controller and into an outlet that is working properly.
• Check the breaker. If the controller is plugged into a power strip, check the breaker to make sure that it is turned on.
• Check the fuse. If the controller is plugged directly into an outlet, check the fuse to make sure that it is not blown.

If the controller is still not resetting, you may need to contact Rain Bird Customer Support for assistance.

Additional Resources

• [Rain Bird SST Controller Manual](https://www.rainbird.com/sites/default/files/documents/products/sst/sst-manual.pdf)
• [Rain Bird SST Controller FAQs](https://www.rainbird.com/sites/default/files/documents/products/sst/sst-faqs.pdf)

This guide has shown you how to reset a Rain Bird SST controller. If you have any other questions, please contact Rain Bird Customer Support.

How do I reset my Rain Bird SST controller?

1. Turn off the power to the controller. This can be done by flipping the breaker switch to the off position, or by unplugging the controller from the outlet.
2. Locate the reset button on the controller. The reset button is usually a small, black button located on the front of the controller.
3. Press and hold the reset button for 5 seconds. The controller will beep and the lights will flash, indicating that it has been reset.
4. Turn the power back on to the controller. The controller will now be in its default settings.

What happens when I reset my Rain Bird SST controller?

When you reset your Rain Bird SST controller, the following things will happen:

• All of the programmed settings will be erased.
• The controller will be set to its default time and date.
• The controller will be in its default irrigation mode.

How do I program my Rain Bird SST controller?

To program your Rain Bird SST controller, you will need to follow these steps:

1. Turn on the power to the controller.
2. Press the Menu button.
3. Use the <** and **> buttons to scroll to the Program menu.
4. Press the Enter button.
5. Use the <** and **> buttons to scroll to the Station you want to program.
6. Press the Enter button.
7. Use the <** and **> buttons to scroll to the Start time.
8. Press the Enter button.
9. Use the <** and **> buttons to set the Duration of the irrigation cycle.
10. Press the Enter button.
11. Repeat steps 5-10 for each station you want to program.
12. Press the Menu button.
13. Press the Enter button.
14. The controller will save your settings and exit the programming mode.

What are the different irrigation modes on the Rain Bird SST controller?

The Rain Bird SST controller has four different irrigation modes:

• Cycle: This mode irrigates all of the stations in the same order, one after the other.
• Sequencial: This mode irrigates the stations in a different order each time.
• Zone: This mode allows you to irrigate individual zones or groups of zones.
• Manual: This mode allows you to manually start and stop the irrigation cycle.

How do I troubleshoot my Rain Bird SST controller?

If your Rain Bird SST controller is not working properly, you can try the following troubleshooting steps:

1. Check the power to the controller. Make sure that the controller is plugged in and that the breaker switch is turned on.
2. Check the fuses in the controller. If the fuses are blown, replace them with new fuses.
3. Check the wiring to the controller. Make sure that the wires are connected properly to the controller.
4. Reset the controller. Press and hold the reset button for 5 seconds.
5. Contact Rain Bird customer support for help. If you are unable to troubleshoot the problem yourself, contact Rain Bird customer support for help.

resetting your Rain Bird SST controller is a simple process that can be completed in just a few steps. By following the steps outlined in this guide, you can quickly and easily restore your controller to its factory defaults and get your sprinkler system back up and running.

Here are the key takeaways from this guide:

• To reset your Rain Bird SST controller, you will need to locate the reset button and press and hold it for 10 seconds.
• The reset button is typically located on the back of the controller, near the power cord.
• After resetting the controller, you will need to reconfigure your settings.
• You can find instructions on how to reconfigure your settings in the owner’s manual for your controller.

By following these steps, you can quickly and easily reset your Rain Bird SST controller and get your sprinkler system back up and running.