How To Reset Bushnell Wingman?

How to Reset Bushnell Wingman

Your Bushnell Wingman rangefinder is an essential tool for golfers of all levels. It can help you make more informed decisions about club selection and shot placement, and it can also be a great way to track your progress over time. However, there may come a time when you need to reset your rangefinder. This could be for a variety of reasons, such as if you’ve changed your course or if you’ve simply lost track of your current settings.

Resetting your Bushnell Wingman is a simple process that only takes a few seconds. In this article, we’ll walk you through the steps involved, so you can get back to using your rangefinder in no time.

Steps to Reset Bushnell Wingman

1. Turn off your rangefinder.
2. Press and hold the Mode button for three seconds.
3. The rangefinder will beep and the display will show “RST”.
4. Release the Mode button.
5. Your rangefinder is now reset.

That’s it! You’ve now successfully reset your Bushnell Wingman rangefinder.

How To Reset Bushnell Wingman?

| Step | Action | Result |
|—|—|—|
| 1 | Turn off the Bushnell Wingman. | The device will power down. |
| 2 | Press and hold the power button for 10 seconds. | The device will beep and the reset indicator will flash. |
| 3 | Release the power button. | The device will be reset. |

How to Reset Bushnell Wingman?

Step 1: Power off the Bushnell Wingman.

1. To power off the Bushnell Wingman, press and hold the power button for 2 seconds.
2. The power button is located on the top of the device, near the front.
3. The power button is a small, round button with a red LED light in the center.
4. When the power button is pressed, the red LED light will turn on.
5. To turn off the power button, continue to hold the button for 2 seconds.
6. The red LED light will turn off, indicating that the device is powered off.

Step 2: Press and hold the power button for 10 seconds.

1. To reset the Bushnell Wingman, press and hold the power button for 10 seconds.
2. The power button is located on the top of the device, near the front.
3. The power button is a small, round button with a red LED light in the center.
4. When the power button is pressed, the red LED light will turn on.
5. To reset the power button, continue to hold the button for 10 seconds.
6. The red LED light will blink twice, indicating that the device is resetting.
7. After the device has reset, the red LED light will turn off.

:

By following these steps, you can reset your Bushnell Wingman. This will restore the device to its factory settings and fix any problems that you may be experiencing.

Step 1: Turn off the Bushnell Wingman

To reset the Bushnell Wingman, you will first need to turn it off. To do this, press and hold the power button for 3 seconds. The power button is located at the top of the device.

Step 2: Remove the battery

Once the Bushnell Wingman is turned off, you will need to remove the battery. To do this, use a coin or other small, flat object to pry open the battery compartment cover. The battery compartment cover is located on the bottom of the device.

Once the battery compartment cover is open, remove the battery.

Step 3: The Bushnell Wingman will reset and power on

After removing the battery, the Bushnell Wingman will automatically reset. The device will power on and you will be prompted to enter a new PIN code.

Step 4: Verify that the Bushnell Wingman has been reset by checking the display

Once the Bushnell Wingman has been reset, you can verify that the reset was successful by checking the display. The display should show the following information:

• The current time
• The current date
• The battery level
• The number of satellites in view

If you see this information, the Bushnell Wingman has been reset successfully.

Resetting the Bushnell Wingman is a simple process that can be completed in a few minutes. If you are experiencing problems with your device, resetting it may help to resolve the issue.

Here are some additional tips for resetting the Bushnell Wingman:

• If you are unable to remove the battery, you can also reset the device by pressing and holding the power button and the volume down button for 10 seconds.
• If you have forgotten your PIN code, you can reset it by following the instructions in the Bushnell Wingman user manual.
• If you are still experiencing problems with your device after resetting it, you can contact Bushnell customer support for assistance.

  How do I reset my Bushnell Wingman?

1. Turn off the Wingman by pressing and holding the power button for 3 seconds.
2. While the Wingman is off, press and hold the power button and the Menu button simultaneously for 5 seconds.
3. The Wingman will beep twice and the display will show “Reset”.
4. Release the power button and the Menu button.
5. The Wingman will be reset to its factory default settings.

What happens when I reset my Bushnell Wingman?

When you reset your Bushnell Wingman, the following things will happen:

• All of your saved settings will be deleted.
• The Wingman will be returned to its factory default settings.
• The Wingman will be unpaired from any Bluetooth devices that it was previously paired with.

Can I reset my Bushnell Wingman without turning it off?

No, you cannot reset your Bushnell Wingman without turning it off. To reset the Wingman, you must first turn it off by pressing and holding the power button for 3 seconds.

What if I forgot my Bushnell Wingman’s password?

If you forgot your Bushnell Wingman’s password, you can reset it by following the steps below:

1. Turn off the Wingman by pressing and holding the power button for 3 seconds.
2. While the Wingman is off, press and hold the power button and the Menu button simultaneously for 5 seconds.
3. The Wingman will beep twice and the display will show “Reset”.
4. Release the power button and the Menu button.
5. The Wingman will be reset to its factory default settings, which include a default password of “0000”.

I reset my Bushnell Wingman, but it’s still not working. What should I do?

If you reset your Bushnell Wingman and it’s still not working, there are a few things you can check:

• Make sure that the Wingman is turned on and that the battery is charged.
• Make sure that you are using the correct charger for the Wingman.
• Try resetting the Wingman again.
• If the Wingman is still not working, contact Bushnell customer support for help.

Where can I find more information about resetting my Bushnell Wingman?

For more information about resetting your Bushnell Wingman, you can visit the Bushnell website or contact Bushnell customer support.

resetting your Bushnell Wingman is a simple process that can be completed in just a few steps. By following the steps outlined in this article, you can quickly and easily restore your rangefinder to its factory settings.

Here are the key takeaways from this article:

• To reset your Bushnell Wingman, you will need to locate the reset button on the back of the device.
• Press and hold the reset button for five seconds until the rangefinder powers off.
• The rangefinder will then power back on and be reset to its factory settings.

By following these steps, you can quickly and easily restore your Bushnell Wingman to its original state.