How To Replace A Water Filter In A Kenmore Refrigerator?

How to Replace a Water Filter in a Kenmore Refrigerator

Your Kenmore refrigerator’s water filter removes impurities from your water, helping to keep your family healthy and your appliances in good working order. But over time, the filter can become clogged and stop working effectively. When this happens, it’s time to replace the filter.

Replacing a water filter in a Kenmore refrigerator is a simple task that can be completed in just a few minutes. In this article, we’ll walk you through the process, step-by-step.

We’ll also provide some tips on how to choose the right filter for your refrigerator and how to maintain your filter for optimal performance. So if you’re ready to learn how to replace a water filter in a Kenmore refrigerator, read on!

Step	Instructions	Image
1	Locate the water filter housing on the back of your refrigerator.
2	Turn the water filter housing counterclockwise to unlock it.
3	Pull the water filter housing out of the refrigerator.
4	Remove the old water filter from the housing.
5	Insert the new water filter into the housing.
6	Turn the water filter housing clockwise to lock it in place.
7	Run a glass of water through the water filter to flush it.

Your Kenmore refrigerator’s water filter removes impurities from your water, such as sediment, chlorine, and other harmful bacteria. It’s important to replace your water filter regularly to ensure that you’re drinking clean, healthy water. This guide will show you how to replace the water filter in your Kenmore refrigerator.

Tools and Materials Needed

• Replacement water filter
• Phillips head screwdriver
• Flathead screwdriver
• Paper towels
• Bowl

Steps to Replace the Water Filter

1. Turn off the water supply to your refrigerator. The water supply valve is usually located on the back of your refrigerator, near the bottom. Turn the valve clockwise to turn off the water supply.
2. Locate the water filter housing. The water filter housing is usually located in the door of your refrigerator, near the bottom.
3. Remove the old water filter. To remove the old water filter, grasp the handle and twist counterclockwise until it comes loose. Be careful not to spill any water.
4. Insert the new water filter. To insert the new water filter, align the tabs on the filter with the slots in the housing and push it in until it snaps into place.
5. Turn on the water supply to your refrigerator. Turn the water supply valve counterclockwise to turn on the water supply.
6. Run a glass of water through the filter. This will flush out any air that may be trapped in the filter.

Your water filter is now replaced! You should replace your water filter every 6 months or as recommended by the manufacturer.

Replacing the water filter in your Kenmore refrigerator is a simple task that can be completed in just a few minutes. By following these steps, you can ensure that you’re drinking clean, healthy water.

How To Replace A Water Filter In A Kenmore Refrigerator?

Kenmore refrigerators come with a water filter that helps to remove impurities from your water supply. Over time, the filter will become clogged and will need to be replaced. This is a relatively simple task that can be completed in just a few minutes.

To replace the water filter in your Kenmore refrigerator, follow these steps:

1. Prepare your tools

You will need the following tools to replace the water filter in your Kenmore refrigerator:

• A flat-head screwdriver
• A new water filter (Kenmore part number 46-9992)

2. Turn off the water supply to the refrigerator

Before you can replace the water filter, you will need to turn off the water supply to the refrigerator. This can be done by turning the water supply valve located at the back of the refrigerator to the “off” position.

3. Locate the water filter housing

The water filter housing is usually located in the back of the refrigerator, near the bottom. It is a cylindrical-shaped object with a blue cap.

4. Remove the old water filter

To remove the old water filter, twist the blue cap counterclockwise until it comes loose. Be careful not to spill any water.

Note: If the water filter is stuck, you can use a flat-head screwdriver to pry it loose.

5. Insert the new water filter

Once the old water filter is removed, insert the new water filter into the housing. Make sure that the filter is properly seated.

6. Turn on the water supply to the refrigerator

Once the new water filter is installed, turn the water supply valve back to the “on” position.

7. Flush the water filter

After you have turned on the water supply to the refrigerator, you will need to flush the water filter. This will help to remove any air bubbles that may be trapped in the filter. To flush the water filter, run a glass of water through the dispenser.

Replacing the water filter in your Kenmore refrigerator is a simple task that can be completed in just a few minutes. By following these steps, you can ensure that your refrigerator is providing you with clean, filtered water.

Here are some additional tips for replacing the water filter in your Kenmore refrigerator:

• Be sure to purchase the correct water filter for your refrigerator. Kenmore refrigerators use a specific type of water filter, so it is important to make sure that you are purchasing the correct one.
• If you are not sure how to replace the water filter in your Kenmore refrigerator, you can consult your owner’s manual for instructions.
• If you have any questions about replacing the water filter in your Kenmore refrigerator, you can contact Kenmore customer service for assistance.

  How often do I need to replace my Kenmore refrigerator water filter?

Most Kenmore refrigerators require that you replace the water filter every 6 months. However, you may need to replace it more often if you have hard water or if you use your refrigerator’s water dispenser frequently.

How do I know when it’s time to replace my Kenmore refrigerator water filter?

There are a few ways to tell when it’s time to replace your Kenmore refrigerator water filter.

• The filter indicator light will turn on. This is the most obvious sign that it’s time for a new filter.
• The water from your refrigerator dispenser tastes or smells bad. This is a sign that the filter is not properly filtering out impurities.
• The water flow from your refrigerator dispenser is slow. This is another sign that the filter is clogged and needs to be replaced.

How do I replace the water filter in my Kenmore refrigerator?

1. Locate the water filter. The water filter is usually located in the back of the refrigerator, near the bottom.
2. Turn off the water supply to the refrigerator. You can usually do this by turning the shut-off valve located under the sink.
3. Remove the old filter. Grasp the handle on the top of the filter and twist it counterclockwise to remove it.
4. Insert the new filter. Make sure that the new filter is properly seated in the housing.
5. Turn on the water supply to the refrigerator.
6. Test the water flow from the refrigerator dispenser. The water should flow freely and should not have any impurities.

What if I accidentally put the wrong water filter in my Kenmore refrigerator?

If you accidentally put the wrong water filter in your Kenmore refrigerator, you should remove it and replace it with the correct filter. The wrong filter may not properly filter out impurities, which could lead to health problems.

What are the benefits of using a Kenmore refrigerator water filter?

There are several benefits to using a Kenmore refrigerator water filter.

• Improved water quality. A water filter can remove impurities from your water, such as chlorine, sediment, and bacteria. This can improve the taste and smell of your water and make it more safe to drink.
• Reduced maintenance. A water filter can help to extend the life of your refrigerator by preventing mineral buildup and other damage.
• Peace of mind. Knowing that your water is filtered can give you peace of mind knowing that you and your family are drinking clean, healthy water.

  replacing a water filter in a Kenmore refrigerator is a simple task that can be completed in a few minutes. By following the steps outlined in this guide, you can ensure that your refrigerator is properly filtered and that you are drinking clean, fresh water.

Here are the key takeaways from this guide:

• The water filter in a Kenmore refrigerator is located behind the kickplate at the bottom of the refrigerator.
• To replace the filter, turn off the water supply to the refrigerator, remove the old filter, and install the new filter.
• Be sure to tighten the new filter until it is snug.
• Turn on the water supply to the refrigerator and let it run for a few minutes to flush out any air from the system.

By following these steps, you can keep your Kenmore refrigerator running smoothly and ensure that you are drinking clean, fresh water.