How To Remove Kohler Shower Handle?

How to Remove a Kohler Shower Handle

Your Kohler shower handle may have become loose, broken, or simply unsightly. Whatever the reason, removing it is a relatively simple task that can be completed in a few minutes. In this guide, we will walk you through the process of removing a Kohler shower handle, step-by-step.

We’ll start by identifying the type of handle you have, and then we’ll provide detailed instructions on how to remove it. We’ll also provide some tips on how to prevent future problems with your shower handle.

So if you’re ready to learn how to remove a Kohler shower handle, read on!

Step	Instructions	Image
1	Turn off the water supply to the shower.
2	Remove the screws that hold the shower handle in place.
3	Pull the shower handle off of the shower faucet.
4	Install the new shower handle by reversing the steps above.

How To Remove Kohler Shower Handle?

Tools and Materials Needed

• Adjustable wrench
• Phillips head screwdriver
• Flathead screwdriver
• Penetrating oil
• Rags

Steps to Remove the Kohler Shower Handle

1. Turn off the water supply to the shower.
2. Remove the shower head.
3. Remove the trim plate.
4. Remove the shower handle screws.
5. Remove the shower handle.

1. Turn off the water supply to the shower.

The first step is to turn off the water supply to the shower. This can be done by turning the shut-off valve located behind the shower. Once the water supply is turned off, you can begin to remove the shower handle.

2. Remove the shower head.

The shower head is typically held in place by a set screw. To remove the shower head, you will need to use a Phillips head screwdriver to loosen the set screw. Once the set screw is loosened, you can pull the shower head off of the shower arm.

3. Remove the trim plate.

The trim plate is the decorative cover that surrounds the shower valve. To remove the trim plate, you will need to use a flathead screwdriver to pry it off of the valve body. Once the trim plate is removed, you will have access to the shower handle screws.

4. Remove the shower handle screws.

The shower handle screws are located on the back of the shower handle. To remove the screws, you will need to use an adjustable wrench. Once the screws are removed, you can pull the shower handle off of the valve body.

5. Remove the shower handle.

Once the screws are removed, the shower handle can be pulled off of the valve body. Be careful not to drop the shower handle, as it is a small and delicate part.

In this tutorial, you learned how to remove a Kohler shower handle. This is a relatively simple task that can be completed by most DIYers. If you have any questions or concerns, please consult with a qualified plumber.

Additional Tips

• If the shower handle is stuck, you can try applying penetrating oil to the screws before attempting to remove them.
• Be careful not to damage the shower valve when removing the shower handle.
• If you are unable to remove the shower handle yourself, you can always consult with a qualified plumber.

3. Turn off the water supply to the shower

Before you can remove the shower handle, you need to turn off the water supply to the shower. This will prevent any water from leaking out of the shower head or faucet while you are working on the handle.

To turn off the water supply to the shower, you will need to find the shut-off valve. This valve is usually located near the water heater or at the point where the water line enters the house. The shut-off valve is a small, round valve with a handle. To turn off the water supply, turn the handle clockwise until it is all the way closed.

Once you have turned off the water supply to the shower, you can proceed to remove the shower handle.

4. Remove the screws that hold the shower handle in place

The shower handle is held in place by two screws. These screws are usually located on the back of the shower handle. To remove the screws, you will need a Phillips head screwdriver.

Once you have located the screws, insert the screwdriver into the screw head and turn the screwdriver counterclockwise. Continue to turn the screwdriver until the screw is loose. Repeat this process for the second screw.

Once the screws are removed, the shower handle should be loose. You can now remove the shower handle by pulling it straight out.

5. Remove the shower handle escutcheon

The shower handle escutcheon is a decorative cover that surrounds the shower handle. To remove the escutcheon, you will need to pry it up with a flathead screwdriver.

Insert the screwdriver into the gap between the escutcheon and the wall. Gently pry up on the escutcheon until it pops loose.

Once the escutcheon is loose, you can remove it by pulling it straight out.

6. Remove the shower handle stem

The shower handle stem is the metal rod that connects the shower handle to the shower valve. To remove the stem, you will need to loosen the setscrew that holds it in place.

The setscrew is located on the back of the shower handle. To loosen the setscrew, you will need a Phillips head screwdriver.

Insert the screwdriver into the setscrew head and turn the screwdriver counterclockwise. Continue to turn the screwdriver until the setscrew is loose.

Once the setscrew is loose, you can remove the shower handle stem by pulling it straight out.

7. Install the new shower handle

To install the new shower handle, you will need to reverse the steps that you took to remove the old shower handle.

First, install the new shower handle stem by inserting it into the shower valve. Then, tighten the setscrew to secure the stem in place.

Next, install the new shower handle escutcheon by snapping it into place. Finally, install the new shower handle by inserting it into the escutcheon.

Once the new shower handle is installed, you can turn on the water supply to the shower.

Replacing a shower handle is a relatively simple task that can be completed in a few minutes. By following these steps, you can easily remove and replace your shower handle.

How do I remove a Kohler shower handle?

1. Turn off the water supply to the shower. This is usually located at the main shut-off valve near the water heater.
2. Remove the shower head. There is usually a small set screw at the base of the shower head. Use a screwdriver to turn the screw counterclockwise until it comes loose.
3. Remove the handle screws. There are two screws located on the back of the handle. Use a screwdriver to turn the screws counterclockwise until they come loose.
4. Pull the handle off. The handle should now be loose and you can pull it off.
5. Replace the handle. To replace the handle, simply reverse the steps above.

What if the handle screws are stuck?

If the handle screws are stuck, you can try using a penetrating oil to loosen them. Apply the oil to the screws and let it sit for a few minutes. Then, try turning the screws again. If they are still stuck, you can try using a heat gun or hair dryer to heat up the screws. This will help to loosen the adhesive that is holding them in place.

What if the handle is broken?

If the handle is broken, you will need to replace it. To do this, you will need to remove the old handle following the steps above. Then, you can install the new handle by following the steps above.

Can I remove the shower handle without turning off the water supply?

It is not recommended to remove the shower handle without turning off the water supply. This is because there is a risk of water spraying out of the shower head and causing damage. If you must remove the handle without turning off the water supply, be sure to take precautions to protect yourself from the water.

What other tools might I need to remove a Kohler shower handle?

In addition to a screwdriver, you may also need a penetrating oil, a heat gun or hair dryer, and a replacement shower handle.

In this blog post, we have discussed how to remove a Kohler shower handle. We have provided step-by-step instructions, along with pictures, to make the process as easy as possible. We hope that this information has been helpful to you. If you have any questions or need further assistance, please do not hesitate to contact us.