How To Make A Figure 8 Finger Splint?

Do you have a sprained finger? If so, you may be wondering how to make a figure 8 finger splint to help it heal. A figure 8 finger splint is a simple and effective way to immobilize your finger and reduce pain and swelling. It can also help to prevent further injury.

In this article, we will show you how to make a figure 8 finger splint using everyday household items. We will also provide tips on how to use the splint and when to see a doctor.

So if you’re dealing with a sprained finger, read on for all the information you need to know about making and using a figure 8 finger splint.

Step	Materials	Instructions
1	1 x 3-inch strip of cloth	1. Cut a 3-inch strip of cloth. 2. Fold the strip in half lengthwise. 3. Center the fold over the injured finger. 4. Bring the ends of the strip around the finger and tie them together in a knot.
2	2 x 1-inch strips of cloth	1. Cut two 1-inch strips of cloth. 2. Fold each strip in half lengthwise. 3. Place one strip on each side of the injured finger, overlapping the center of the finger. 4. Bring the ends of the strips around the finger and tie them together in a knot.
3	1 x 2-inch strip of cloth	1. Cut a 2-inch strip of cloth. 2. Fold the strip in half lengthwise. 3. Center the fold over the injured finger. 4. Bring the ends of the strip around the finger and tie them together in a knot.

A figure 8 finger splint is a simple and effective way to immobilize a finger that is fractured or sprained. It can also be used to provide support for a finger that is recovering from surgery. The splint is made from two strips of felt that are sewn together in a figure 8 shape. A piece of elastic is then sewn around the splint to hold it in place.

Materials

• 2 x 3-inch strips of felt
• 1 x 1-inch strip of elastic
• Scissors
• Needle and thread

Instructions

1. Cut two strips of felt that are 3 inches long and 1 inch wide.
2. Fold each strip of felt in half lengthwise.
3. Sew the two strips of felt together along the long edge, leaving a 1-inch opening at one end.
4. Turn the splint right side out.
5. Sew the 1-inch opening closed.
6. Cut a piece of elastic that is long enough to go around your finger twice.
7. Sew the elastic around the splint, just below the fold.

How to Wear a Figure 8 Finger Splint

To wear a figure 8 finger splint, first wash your hands and dry them thoroughly. Then, slide the splint onto your finger so that the fold is on the inside of your finger. The elastic should be around the middle of your finger.

You should wear the splint for as long as directed by your doctor. It is important to keep the splint clean and dry. If the splint becomes dirty, wash it with mild soap and water and dry it thoroughly.

A figure 8 finger splint is a simple and effective way to immobilize a finger that is injured. It can help to reduce pain and swelling, and it can also speed up the healing process. If you have a finger injury, talk to your doctor about whether a figure 8 finger splint is right for you.

Materials

• 2 pieces of felt, each 6 inches by 12 inches
• Scissors
• Needle and thread
• Safety pin

Instructions

1. Cut the felt strips into 1-inch wide strips.
2. Fold each strip in half lengthwise.
3. Sew the strips together to form a long tube.
4. Sew the ends of the tube together to form a circle.
5. Fold the circle in half so that the right sides are together.
6. Sew the edges of the circle together, leaving a small opening for turning.
7. Turn the circle right side out.
8. Stuff the circle with batting or other filler.
9. Sew the opening closed.
10. Sew a safety pin to the inside of the splint so that it can be easily removed.

Tips

• Use a sharp needle and thread to sew the splint together.
• Make sure the splint is snug but not too tight.
• If you are making the splint for a child, use a child-safe safety pin.

A figure 8 finger splint is a simple and effective way to immobilize a finger. It can be used to treat a variety of injuries, including sprains, strains, and fractures. This splint is easy to make and can be used at home or in a medical setting.

How to Make a Figure 8 Finger Splint?

Q: What materials do I need?

A: You will need the following materials:

• A piece of fabric (such as felt or cotton)
• A piece of elastic or ribbon
• A needle and thread
• Scissors

Q: What is the procedure for making a figure 8 finger splint?

A: To make a figure 8 finger splint, follow these steps:

1. Cut the fabric into a rectangle that is about 8 inches long and 4 inches wide.
2. Fold the fabric in half lengthwise, so that the long sides are together.
3. Sew the two long sides together, leaving a small opening at one end.
4. Turn the fabric right side out.
5. Insert the elastic or ribbon through the opening, so that it forms a figure 8.
6. Sew the opening closed.
7. Apply the splint to your finger, making sure that it is snug but not too tight.

Q: How do I use a figure 8 finger splint?

A: To use a figure 8 finger splint, follow these steps:

1. Wash your hands and dry them thoroughly.
2. Apply the splint to your finger, making sure that it is snug but not too tight.
3. Secure the splint in place with tape or medical adhesive.
4. Remove the splint when you are not using it.

Q: How long should I wear a figure 8 finger splint?

A: You should wear a figure 8 finger splint for as long as directed by your doctor.

Q: What are the benefits of using a figure 8 finger splint?

A: A figure 8 finger splint can provide the following benefits:

• Support and immobilization for a sprained or fractured finger
• Pain relief
• Reduced swelling
• Improved healing

Q: Are there any risks associated with using a figure 8 finger splint?

A: There are no major risks associated with using a figure 8 finger splint. However, you should be aware of the following potential risks:

• The splint may be too tight or too loose, which could cause discomfort or pain.
• The splint may not be properly positioned, which could prevent the finger from healing properly.
• The splint may be difficult to remove, which could lead to skin irritation or injury.

If you experience any of these problems, you should remove the splint and contact your doctor.

In this tutorial, we have discussed how to make a figure 8 finger splint. We have covered the materials needed, the steps involved, and the precautions to take. We hope that this tutorial has been helpful and that you are now able to make your own figure 8 finger splint.

Here are some key takeaways from this tutorial:

• A figure 8 finger splint is a simple and effective way to immobilize a finger.
• The materials needed to make a figure 8 finger splint are a piece of fabric, a pen or marker, and scissors.
• The steps involved in making a figure 8 finger splint are as follows:

1. Fold the fabric in half lengthwise.
2. Draw a figure 8 on the fabric, with the center of the 8 being where the finger will go.
3. Cut out the figure 8.
4. Place the splint on the finger, with the center of the 8 over the joint.
5. Fold the ends of the splint over the finger and secure them with tape.

• Precautions to take when making a figure 8 finger splint include:
• Make sure the splint is the right size for the finger.
• Do not wrap the splint too tightly, as this could restrict blood flow.
• Check the splint regularly to make sure it is not causing any discomfort.

We hope that this tutorial has been helpful and that you are now able to make your own figure 8 finger splint.