How To Clean Roborock Sensors?

How to Clean Roborock Sensors

Your Roborock vacuum cleaner is a powerful and efficient way to keep your floors clean, but it can only do its job if its sensors are clean. Over time, dirt and dust can build up on the sensors, which can interfere with their ability to function properly. This can lead to your Roborock missing spots or bumping into objects, which can damage both your vacuum cleaner and your furniture.

Fortunately, cleaning your Roborock’s sensors is a simple and quick task that you can do in just a few minutes. In this article, we’ll show you how to clean the sensors on your Roborock vacuum cleaner so that it can continue to perform at its best.

What are the sensors on a Roborock vacuum cleaner?

Roborock vacuum cleaners use a variety of sensors to navigate your home and avoid obstacles. These sensors include:

• Infrared sensors: These sensors detect objects in front of the vacuum cleaner and help it to avoid collisions.
• Optical sensors: These sensors detect changes in light, which the vacuum cleaner uses to map your home and create a virtual map.
• Fall sensors: These sensors detect when the vacuum cleaner is about to fall down a cliff or step, and they automatically stop the vacuum cleaner from moving forward.
• Collision sensors: These sensors detect when the vacuum cleaner has bumped into an object, and they help the vacuum cleaner to correct its course.

How to clean Roborock sensors

To clean the sensors on your Roborock vacuum cleaner, you will need:

• A soft cloth
• A small amount of rubbing alcohol

1. Turn off your Roborock vacuum cleaner and unplug it from the power outlet.
2. Use the soft cloth to gently wipe down the sensors on the front of the vacuum cleaner.
3. If the sensors are particularly dirty, you can use a small amount of rubbing alcohol to clean them.
4. Be careful not to use too much rubbing alcohol, as this could damage the sensors.
5. Once the sensors are clean, dry them off with a clean cloth.
6. Plug your Roborock vacuum cleaner back into the power outlet and turn it on.

Your Roborock vacuum cleaner’s sensors are now clean and ready to help your vacuum cleaner keep your floors clean.

Sensor	How to Clean	Frequency
Bumper Sensors	Use a dry cloth to wipe the sensors clean.	Daily
Infrared Sensors	Use a dry cloth to wipe the sensors clean.	Weekly
Drop Sensors	Use a dry cloth to wipe the sensors clean.	Monthly

What sensors does the Roborock have?

The Roborock S7 has a variety of sensors that help it navigate your home and clean your floors effectively. These sensors include:

• Laser range finder (LRF): The LRF is located on the top of the Roborock S7 and uses a laser beam to create a map of your home. This map helps the Roborock S7 navigate around obstacles and avoid getting stuck.
• Infrared sensors (IR): The IR sensors are located on the front and back of the Roborock S7 and help it detect objects in its path. This helps the Roborock S7 avoid bumping into furniture and walls.
• Contact sensors: The contact sensors are located on the bottom of the Roborock S7 and help it detect when it is on a carpet or hard floor. This helps the Roborock S7 adjust its cleaning power accordingly.
• Wheel sensors: The wheel sensors are located on the front and back of the Roborock S7 and help it track its position on the floor. This helps the Roborock S7 avoid getting stuck in tight spaces.
• Drop sensors: The drop sensors are located on the front and back of the Roborock S7 and help it detect when it is about to fall down a cliff. This helps the Roborock S7 avoid dangerous situations.

How to clean each sensor?

The Roborock S7’s sensors are easy to clean and maintain. Here are the steps on how to clean each sensor:

1. Laser range finder (LRF): To clean the LRF, use a dry microfiber cloth to gently wipe away any dust or dirt. Do not use any liquids or abrasive cleaners, as this could damage the sensor.
2. Infrared sensors (IR): To clean the IR sensors, use a dry microfiber cloth to gently wipe away any dust or dirt. Do not use any liquids or abrasive cleaners, as this could damage the sensor.
3. Contact sensors: To clean the contact sensors, use a dry microfiber cloth to gently wipe away any dust or dirt. Do not use any liquids or abrasive cleaners, as this could damage the sensor.
4. Wheel sensors: To clean the wheel sensors, use a dry microfiber cloth to gently wipe away any dust or dirt. Do not use any liquids or abrasive cleaners, as this could damage the sensor.
5. Drop sensors: To clean the drop sensors, use a dry microfiber cloth to gently wipe away any dust or dirt. Do not use any liquids or abrasive cleaners, as this could damage the sensor.

By following these steps, you can keep your Roborock S7’s sensors clean and functioning properly. This will help your Roborock S7 navigate your home and clean your floors effectively.

The Roborock S7 is a powerful and efficient robot vacuum cleaner that comes equipped with a variety of sensors to help it navigate your home and clean your floors effectively. By following the steps in this guide, you can keep your Roborock S7’s sensors clean and functioning properly, ensuring that your Roborock S7 continues to perform at its best.

How to Clean Roborock Sensors

Roborock’s robot vacuums are equipped with a variety of sensors that help them navigate your home and avoid obstacles. These sensors can get dirty over time, which can affect the robot’s performance. Cleaning the sensors regularly will help keep your Roborock running smoothly and efficiently.

Here’s how to clean the sensors on your Roborock:

1. Turn off the robot and unplug it from the charger.
2. Use a soft, dry cloth to gently wipe the sensors. Be careful not to apply too much pressure, as this could damage the sensors.
3. If the sensors are particularly dirty, you can use a damp cloth to clean them. However, make sure to dry the sensors completely before using the robot again.

Here are the specific steps for cleaning each type of sensor on your Roborock:

• LDS (Laser Distance Sensor): The LDS sensor is located on the top of the robot. To clean it, use a soft, dry cloth to gently wipe the lens.
• Bumper Sensors: The bumper sensors are located on the front and sides of the robot. To clean them, use a soft, dry cloth to gently wipe the sensors.
• Infrared Sensors: The infrared sensors are located on the front and sides of the robot. To clean them, use a soft, dry cloth to gently wipe the sensors.
• Fall Detection Sensors: The fall detection sensors are located on the bottom of the robot. To clean them, use a soft, dry cloth to gently wipe the sensors.

Note: If you have a Roborock S7 or S7 MaxV, you will also need to clean the camera lens. To do this, use a soft, dry cloth to gently wipe the lens.

How often should you clean the sensors?

The frequency with which you need to clean the sensors on your Roborock will depend on how often you use it and the environment in which it operates. If you have a lot of pets or if you live in a dusty environment, you may need to clean the sensors more often.

In general, it is a good idea to clean the sensors on your Roborock once a week. This will help keep your robot running smoothly and efficiently.

Troubleshooting tips for common sensor problems

If your Roborock is having trouble navigating your home or avoiding obstacles, it may be due to a problem with the sensors. Here are some troubleshooting tips for common sensor problems:

• If the robot is bumping into objects, it may be because the bumper sensors are dirty. Clean the bumper sensors according to the instructions in the previous section.
• If the robot is getting stuck on carpets or rugs, it may be because the infrared sensors are dirty. Clean the infrared sensors according to the instructions in the previous section.
• If the robot is not able to dock properly, it may be because the fall detection sensors are dirty. Clean the fall detection sensors according to the instructions in the previous section.
• If the robot is having trouble mapping your home, it may be because the camera lens is dirty. Clean the camera lens according to the instructions in the previous section.

If you have tried these troubleshooting tips and your Roborock is still having problems, you may need to contact customer support for further assistance.

By following these tips, you can keep the sensors on your Roborock clean and functioning properly. This will help your robot run smoothly and efficiently, and it will also help you avoid potential problems.

How do I clean the Roborock sensors?

The Roborock sensors are located on the front of the robot, and they are used to help the robot navigate around your home. To clean the sensors, you will need a soft cloth and some isopropyl alcohol.

1. Turn off the Roborock and unplug it from the charger.
2. Use the soft cloth to gently wipe down the sensors.
3. Apply a small amount of isopropyl alcohol to the cloth and wipe down the sensors again.
4. Allow the sensors to dry completely before turning on the Roborock and plugging it back in.

What should I do if the Roborock sensors are dirty?

If the Roborock sensors are dirty, they may not be able to properly navigate around your home. This could cause the robot to bump into objects or get stuck. To clean the sensors, follow the steps above.

How often should I clean the Roborock sensors?

The frequency with which you clean the Roborock sensors will depend on how often you use the robot. If you use the robot every day, you should clean the sensors once a week. If you use the robot less frequently, you can clean the sensors less often.

What if I accidentally damage the Roborock sensors?

If you accidentally damage the Roborock sensors, you will need to replace them. You can purchase replacement sensors from the Roborock website or from a third-party retailer.

Can I use a different cleaning solution to clean the Roborock sensors?

It is not recommended to use a different cleaning solution to clean the Roborock sensors. The isopropyl alcohol is specifically designed to clean the sensors without damaging them.

I have a Roborock S5, is there a different way to clean the sensors?

Yes, the Roborock S5 has a self-cleaning feature that can be used to clean the sensors. To use the self-cleaning feature, follow these steps:

1. Turn on the Roborock S5.
2. Press and hold the power button for three seconds.
3. The robot will start to clean the sensors.
4. Once the sensors are clean, the robot will stop cleaning.

cleaning your Roborock sensors is an important task that can help to ensure that your robot vacuum cleaner performs optimally. By following the steps outlined in this guide, you can easily and quickly clean your Roborock sensors, keeping your robot vacuum cleaner running smoothly and efficiently.

Here are some key takeaways from this guide:

• The most important sensors on your Roborock are the cliff sensors, the wheel sensors, and the dustbin sensor.
• You should clean your Roborock sensors every 2-3 weeks to prevent them from becoming dirty and malfunctioning.
• You can clean the cliff sensors with a dry cloth, the wheel sensors with a damp cloth, and the dustbin sensor with a dry brush.
• If your Roborock sensors are still not working properly after cleaning them, you may need to replace them.