How To Clean Remington 870?

How to Clean a Remington 870

The Remington 870 is a popular shotgun for both hunting and home defense. It’s a reliable and durable firearm, but it’s important to clean it regularly to keep it in good working order. Cleaning your Remington 870 is a fairly simple process, but it’s important to do it correctly to avoid damaging the gun.

In this article, we’ll walk you through the steps of cleaning a Remington 870. We’ll cover everything from disassembling the gun to cleaning the barrel and action. We’ll also provide tips on how to keep your Remington 870 clean and in good working order.

So if you’re looking for a comprehensive guide on how to clean a Remington 870, read on!

Step	Instructions	Image
1	Remove the magazine and any shells from the gun.
2	Open the action and remove the bolt assembly.
3	Wipe down the exterior of the gun with a clean cloth.
4	Dry fire the gun a few times to expel any remaining debris.
5	Apply a light coat of oil to the moving parts of the gun.
6	Reassemble the gun and you’re done!

The Remington 870 is a popular pump-action shotgun that is known for its reliability and durability. However, like all firearms, it is important to clean the Remington 870 regularly to keep it in good working order. This guide will walk you through the steps of cleaning a Remington 870, from preparing the firearm for cleaning to reassembling it after cleaning.

Step 1: Prepare Your Remington 870 for Cleaning

The first step in cleaning a Remington 870 is to prepare the firearm for cleaning. This involves removing all ammunition from the firearm and disassembling it according to the manufacturer’s instructions.

To remove the ammunition from the Remington 870, open the action and visually inspect the chamber to ensure that there is no ammunition present. If there is ammunition present, unload the firearm by following these steps:

1. Depress the safety button.
2. Grasp the slide release lever and pull it down.
3. Allow the slide to move forward, ejecting the shell from the chamber.
4. Repeat steps 2 and 3 until all ammunition has been unloaded from the firearm.

Once you have ensured that the firearm is unloaded, you can begin to disassemble it. To disassemble the Remington 870, follow these steps:

1. Remove the magazine tube cap by turning it counterclockwise until it unscrews.
2. Remove the magazine tube by pulling it straight out of the receiver.
3. Remove the bolt assembly by pulling it straight out of the receiver.
4. Remove the fore-end assembly by unscrewing the two screws that hold it in place.

Once the Remington 870 has been disassembled, you can begin cleaning it.

Step 2: Clean the Exterior of the Remington 870

The exterior of the Remington 870 can be cleaned with a soft cloth and a solvent. To clean the exterior of the firearm, follow these steps:

1. Wipe down the exterior of the firearm with a soft cloth to remove any dirt or debris.
2. Apply a solvent to a clean cloth and wipe down the exterior of the firearm to remove any grease or oil.
3. Be sure to dry the firearm thoroughly before reassembling it.

Step 3: Clean the Interior of the Remington 870

The interior of the Remington 870 can be cleaned with a bore brush and a solvent. To clean the interior of the firearm, follow these steps:

1. Insert a bore brush into the barrel and rotate it back and forth to remove any dirt or debris.
2. Apply a solvent to a clean patch and run it through the barrel to remove any remaining dirt or debris.
3. Repeat steps 1 and 2 until the barrel is clean.
4. Clean the bolt assembly with a solvent and a toothbrush.
5. Be sure to dry all of the parts thoroughly before reassembling the firearm.

Step 4: Reassemble the Remington 870

Once all of the parts have been cleaned, you can reassemble the Remington 870. To reassemble the firearm, follow these steps:

1. Insert the bolt assembly into the receiver.
2. Insert the fore-end assembly and tighten the two screws that hold it in place.
3. Insert the magazine tube into the receiver.
4. Replace the magazine tube cap.

Your Remington 870 is now clean and ready to use.

Cleaning your Remington 870 regularly is important to keep it in good working order. By following the steps in this guide, you can clean your Remington 870 quickly and easily.

Here are some additional tips for cleaning your Remington 870:

• Use a bore brush that is the same diameter as the barrel of your firearm.
• Use a solvent that is specifically designed for cleaning firearms.
• Be sure to dry all of the parts thoroughly before reassembling the firearm.
• Store your Remington 870 in a clean, dry place.

By following these tips, you can help to extend the life of your Remington 870 and ensure that it is always ready to use.

Step 3: Clean the Interior of the Remington 870

To clean the interior of the Remington 870, you will need the following items:

• A cleaning rod
• A cleaning brush
• A solvent
• A rag

1. Remove the barrel from the Remington 870.
2. Insert the cleaning rod into the barrel and attach the cleaning brush to the end of the rod.
3. Use the cleaning rod and brush to clean the barrel of the firearm. Be sure to clean the inside of the barrel, as well as the outside.
4. Apply a solvent to a rag and wipe down the inside of the barrel. Be sure to remove all of the dirt and debris.
5. Dry the barrel thoroughly with a clean rag.
6. Reassemble the Remington 870.

Step 4: Lubricate the Remington 870

To lubricate the Remington 870, you will need the following items:

• A lubricant
• A rag

1. Apply a light coat of lubricant to the moving parts of the firearm. Be sure to apply the lubricant to the following areas:

• The bolt
• The action
• The trigger
• The magazine

2. Be sure to wipe away any excess lubricant.

Once you have completed these steps, your Remington 870 will be clean and lubricated and ready for use.

Cleaning and lubricating your Remington 870 is an important part of maintaining the firearm in good working order. By following these steps, you can keep your Remington 870 clean and lubricated and ensure that it is ready for use when you need it.

Here are some additional tips for cleaning and lubricating your Remington 870:

• Clean the firearm more often if you shoot it frequently.
• Use a solvent that is specifically designed for firearms.
• Be careful not to use too much lubricant.
• Wipe away any excess lubricant after you have finished cleaning and lubricating the firearm.

By following these tips, you can keep your Remington 870 in good working order for years to come.

Additional Resources

• [Remington 870 Owner’s Manual](https://www.remington.com/content/dam/remington-content/documents/owners-manuals/firearms/manuals/870_owner.pdf)
• [How to Clean a Remington 870](https://www.wikihow.com/Clean-a-Remington-870)
• [Remington 870 Cleaning and Lubrication Tips](https://www.gundigest.com/article/remington-870-cleaning-and-lubrication-tips)

  How often should I clean my Remington 870?

• Answer: It is recommended to clean your Remington 870 after every 500 rounds fired. However, if you shoot in dusty or dirty conditions, you may need to clean it more often.

What do I need to clean my Remington 870?

• Answer: You will need the following items to clean your Remington 870:
• A cleaning kit specifically designed for the Remington 870
• Gun oil
• A rag
• A brush
• A boresnake

How do I clean the exterior of my Remington 870?

• Answer: To clean the exterior of your Remington 870, follow these steps:

1. Remove the magazine and any other accessories from the gun.
2. Wipe down the exterior of the gun with a rag dampened with gun oil.
3. Use a brush to clean any dirt or debris from the crevices of the gun.
4. Apply a light coat of gun oil to the exterior of the gun.

How do I clean the barrel of my Remington 870?

• Answer: To clean the barrel of your Remington 870, follow these steps:

1. Remove the barrel from the gun.
2. Soak a boresnake in gun oil.
3. Insert the boresnake into the barrel and pull it through several times.
4. Use a brush to clean any remaining dirt or debris from the barrel.
5. Wipe down the inside of the barrel with a rag dampened with gun oil.

How do I clean the action of my Remington 870?

• Answer: To clean the action of your Remington 870, follow these steps:

1. Remove the bolt from the gun.
2. Wipe down the bolt with a rag dampened with gun oil.
3. Use a brush to clean any dirt or debris from the bolt.
4. Apply a light coat of gun oil to the bolt.

How do I lubricate my Remington 870?

• Answer: To lubricate your Remington 870, follow these steps:

1. Apply a small amount of gun oil to the following areas:

• The bolt
• The action
• The trigger assembly
• The magazine

2. Wipe away any excess oil.

What should I do if my Remington 870 is not functioning properly?

• Answer: If your Remington 870 is not functioning properly, you should take it to a qualified gunsmith for inspection and repair.

  cleaning your Remington 870 is an important part of gun maintenance. By following the steps in this guide, you can keep your shotgun in top condition and ensure that it functions properly.

Here are the key takeaways:

• Always wear eye protection when cleaning your gun.
• Use a cleaning rod and bore brush to clean the barrel.
• Use a solvent and cloth to clean the exterior of the gun.
• Lubricate the gun with a light oil.
• Store your gun in a safe place when not in use.

By following these steps, you can keep your Remington 870 clean and functioning properly for years to come.