How To Clean A Ar-15 For Beginners?

Step	Instructions	Image
1	Remove the AR-15 from the safe and place it on a table.
2	Lock the bolt back and remove the magazine.
3	Inspect the chamber and barrel for any obstructions.
4	Apply a small amount of gun oil to the bolt carrier group and lubricate the moving parts.
5	Wipe down the exterior of the AR-15 with a clean cloth.
6	Reassemble the AR-15 and store it in a safe place.

The AR-15 is a popular rifle for both recreational and self-defense purposes. It is a relatively simple rifle to operate and maintain, but it is still important to clean it regularly to ensure proper function and prevent wear and tear. This guide will walk you through the process of cleaning an AR-15 for beginners.

Safety Precautions

Before you begin cleaning your AR-15, it is important to take some safety precautions.

• Wear eye protection and gloves. This will protect your eyes and hands from any debris that may be released during the cleaning process.
• Unload the rifle and ensure that the chamber is clear. This is the most important safety precaution to take when cleaning any firearm.
• Work in a well-ventilated area. The cleaning solvent used to clean an AR-15 can be harmful if inhaled.
• Use a cleaning solvent that is compatible with the AR-15’s finish. Some cleaning solvents can damage the finish on the AR-15. Be sure to use a solvent that is specifically designed for use on firearms.

Disassembling the AR-15

The first step in cleaning an AR-15 is to disassemble it. This will allow you to access all of the parts that need to be cleaned.

To disassemble the AR-15, follow these steps:

1. Remove the magazine.
2. Lock the bolt back.
3. Rotate the takedown pin and remove the upper and lower receivers.
4. Remove the bolt carrier group.
5. Remove the barrel.

Cleaning the AR-15

Now that the AR-15 is disassembled, you can begin cleaning it.

To clean the AR-15, follow these steps:

1. Use a cleaning brush to remove any dirt or debris from the inside of the barrel.
2. Use a cleaning cloth to wipe down the exterior of the barrel.
3. Use a cleaning solvent to clean the bolt carrier group.
4. Use a cleaning cloth to wipe down the exterior of the bolt carrier group.
5. Use a cleaning solvent to clean the upper and lower receivers.
6. Use a cleaning cloth to wipe down the exterior of the upper and lower receivers.

Reassembling the AR-15

Once the AR-15 is clean, you can reassemble it.

To reassemble the AR-15, follow these steps:

1. Insert the barrel into the upper receiver.
2. Insert the bolt carrier group into the upper receiver.
3. Rotate the takedown pin and insert the upper and lower receivers.
4. Insert the magazine.

Cleaning your AR-15 is an important part of maintaining your firearm. By following these steps, you can ensure that your AR-15 is clean and functioning properly.

3. Cleaning the AR-15

The AR-15 is a semi-automatic rifle that is popular for its accuracy, reliability, and ease of use. However, like any other firearm, it is important to clean the AR-15 regularly to prevent malfunctions and ensure its long-term reliability.

Cleaning the AR-15 is a relatively simple process, but it is important to follow the proper steps to ensure that the rifle is properly cleaned and lubricated.

Tools and Materials

To clean the AR-15, you will need the following tools and materials:

• AR-15 cleaning kit
• Boresnake
• Gun oil
• Rags
• Solvent
• Safety glasses

Steps

1. Disassemble the AR-15. The first step is to disassemble the AR-15 so that you can access all of the parts that need to be cleaned. To do this, follow the instructions in your AR-15 owner’s manual.
2. Clean the barrel. The barrel is one of the most important parts of the AR-15, so it is important to clean it thoroughly. To clean the barrel, use a cleaning brush and solvent to remove all of the dirt and debris. Be sure to clean the inside of the barrel as well as the outside.
3. Clean the bolt carrier group. The bolt carrier group is another important part of the AR-15, so it is important to clean it thoroughly as well. To clean the bolt carrier group, use a cleaning brush and solvent to remove all of the dirt and debris. Be sure to clean the inside of the bolt carrier group as well as the outside.
4. Clean the receiver. The receiver is the part of the AR-15 that houses the bolt carrier group and the trigger assembly. To clean the receiver, use a rag and solvent to remove all of the dirt and debris. Be sure to clean all of the nooks and crannies.
5. Lubricate the AR-15. Once the AR-15 is clean, it is important to lubricate it to prevent rust and corrosion. To lubricate the AR-15, use a light coat of gun oil on all of the moving parts. Be sure to avoid getting oil on the trigger assembly.

Tips

• When cleaning the AR-15, be sure to wear safety glasses to protect your eyes from any flying debris.
• Use a cleaning brush that is the correct size for the AR-15. A brush that is too small will not be able to reach all of the nooks and crannies, and a brush that is too large could damage the rifle.
• Use a solvent that is specifically designed for cleaning firearms. Some solvents can damage the finish on the AR-15.
• Be sure to dry the AR-15 completely before reassembling it. A wet AR-15 is more likely to rust and corrode.
• Lubricate the AR-15 with a light coat of gun oil. A heavy coat of oil can attract dirt and debris, which can lead to malfunctions.

Cleaning the AR-15 is a simple process, but it is important to follow the proper steps to ensure that the rifle is properly cleaned and lubricated. By following these steps, you can help to keep your AR-15 in top condition and prevent malfunctions.

Additional Resources

• [How to Clean an AR-15: A Step-by-Step Guide](https://www.pewpewtactical.com/how-to-clean-an-ar-15/)
• [AR-15 Cleaning Kit Buyer’s Guide](https://www.luckygunner.com/lounge/ar-15-cleaning-kit-buyers-guide/)
• [How to Lubricate an AR-15](https://www.ar15.com/forums/ar-15/How-to-Lubricate-an-AR-15-/174-266386/)

  How often should I clean my AR-15?

The frequency with which you should clean your AR-15 depends on a number of factors, including:

• How often you shoot it
• The type of ammunition you use
• The environment in which you shoot

Generally speaking, you should clean your AR-15 after every 500 rounds fired. However, if you shoot in dusty or dirty conditions, you may need to clean it more often.

What do I need to clean my AR-15?

You will need the following items to clean your AR-15:

• A cleaning kit specifically designed for AR-15s
• Gun oil
• A rag or cloth
• A bore brush
• A cleaning rod
• A solvent

How do I clean the inside of my AR-15 barrel?

To clean the inside of your AR-15 barrel, you will need to:

1. Remove the bolt carrier group from the rifle.
2. Attach a cleaning rod to the bore brush.
3. Apply solvent to the bore brush.
4. Insert the bore brush into the barrel and rotate it back and forth until the solvent has been removed.
5. Repeat steps 3 and 4 until the bore brush comes out clean.
6. Apply gun oil to a rag or cloth and wipe down the inside of the barrel.

How do I clean the outside of my AR-15?

To clean the outside of your AR-15, you will need to:

1. Remove any dirt or debris from the rifle.
2. Apply gun oil to a rag or cloth and wipe down the entire rifle.
3. Pay special attention to the moving parts, such as the bolt carrier group and the trigger assembly.
4. Be sure to dry the rifle completely before storing it.

What are some common mistakes people make when cleaning their AR-15s?

Some common mistakes people make when cleaning their AR-15s include:

• Using the wrong cleaning kit.
• Using too much solvent.
• Not cleaning the rifle thoroughly enough.
• Not drying the rifle completely before storing it.

To avoid these mistakes, be sure to read the owner’s manual for your AR-15 and follow the manufacturer’s cleaning instructions. You can also find helpful tips and advice on cleaning AR-15s online and in gun magazines.

How can I prevent my AR-15 from getting dirty?

There are a few things you can do to prevent your AR-15 from getting dirty, including:

• Shooting in a clean environment.
• Using a dust cover when not in use.
• Cleaning the rifle after each use.
• Storing the rifle in a clean, dry place.

By following these tips, you can help keep your AR-15 clean and functioning properly.

In this comprehensive guide, we have discussed how to clean an AR-15 for beginners. We covered everything from the basic tools and supplies you need to the steps involved in the cleaning process. We also provided some tips and tricks to help you get the job done quickly and efficiently.

We hope this guide has been helpful. If you have any questions, please feel free to leave them in the comments below.

Key Takeaways:

• The most important tools for cleaning an AR-15 are a cleaning kit, a boresnake, and a solvent.
• The steps involved in cleaning an AR-15 are:
• Disassembling the rifle
• Cleaning the bore
• Cleaning the bolt carrier group
• Cleaning the receiver
• Reassembling the rifle
• To clean the bore, you can use a boresnake or a cleaning rod and brush.
• To clean the bolt carrier group, you can use a solvent and a brush.
• To clean the receiver, you can use a cloth or a boresnake.
• Be sure to lubricate the rifle after cleaning it.
• Clean your AR-15 regularly to prevent malfunctions and extend its lifespan.