How To Change Headlight On 2017 Chevy Equinox?

ByCarla Denker Blog

How to Change a Headlight on a 2017 Chevy Equinox

Your headlights are an important safety feature, and it’s important to keep them in good working order. If one of your headlights is out, you can usually replace it yourself in about 30 minutes. This guide will show you how to change a headlight on a 2017 Chevy Equinox.

What you’ll need

  • Replacement headlight bulb
  • Phillips head screwdriver
  • Torx T25 screwdriver
  • Rags or paper towels
  • Safety glasses

Steps

1. Park your car in a well-lit area. Turn off the engine and set the parking brake.
2. Open the hood. Locate the headlight assembly on the side of the car where the headlight is out.
3. Remove the plastic cover. There is a plastic cover over the headlight assembly. It is held in place by two Phillips head screws. Remove the screws and set the cover aside.
4. Disconnect the wiring harness. There is a wiring harness connected to the back of the headlight assembly. Disconnect the wiring harness by pulling on the tab.
5. Remove the headlight assembly. There are two Torx T25 screws that hold the headlight assembly in place. Remove the screws and carefully remove the headlight assembly from the car.
6. Install the new headlight bulb. Make sure the new headlight bulb is the correct type for your car. Insert the new headlight bulb into the headlight assembly and tighten the retaining screws.
7. Reconnect the wiring harness. Reconnect the wiring harness to the back of the headlight assembly.
8. Replace the plastic cover. Replace the plastic cover over the headlight assembly and tighten the screws.
9. Close the hood. Lower the hood and close it.

Tips

  • Wear safety glasses to protect your eyes from any sharp objects or flying debris.
  • Be careful not to touch the glass of the headlight bulb with your bare hands. The oils from your skin can damage the bulb.
  • If you are not comfortable working on your car, take it to a qualified mechanic.

    Step Tools Instructions
    1 Phillips head screwdriver Open the hood of your vehicle. Locate the headlight assembly on the side you want to replace. There will be a plastic cover over the headlight. Remove the cover by unscrewing the two Phillips head screws that hold it in place.
    2 Socket wrench Locate the headlight assembly mounting bolts. There will be two bolts, one on the top and one on the bottom. Use the socket wrench to loosen the bolts.
    3 Wedge Grasp the headlight assembly and gently pull it out of the housing. There may be a wiring harness connected to the back of the headlight assembly. Disconnect the wiring harness by pulling on the connector.
    4 New headlight Remove the old headlight bulb from the headlight assembly by twisting it counterclockwise. Insert the new headlight bulb into the headlight assembly and twist it clockwise to lock it in place.
    5 Phillips head screwdriver Reattach the headlight assembly to the vehicle by reattaching the two Phillips head screws. Replace the plastic cover over the headlight assembly.

    How to Change Headlight on a 2017 Chevy Equinox

    This guide will show you how to change the headlight on a 2017 Chevy Equinox. The headlights are located on the front of the vehicle, one on each side. Each headlight is held in place by two screws.

    Tools and Materials

    To change the headlight on a 2017 Chevy Equinox, you will need the following tools and materials:

    • Phillips head screwdriver
    • Torx T25 screwdriver
    • Wedge tool
    • Replacement headlight

    Locating the Headlights

    The headlights are located on the front of the vehicle, one on each side. Each headlight is held in place by two screws.

    To locate the headlights, follow these steps:

    1. Open the hood of the vehicle.
    2. Look for the two headlights, one on each side of the vehicle.
    3. Each headlight is held in place by two screws.

    Removing the Headlights

    To remove the headlights, follow these steps:

    1. Use the Phillips head screwdriver to remove the two screws that hold the headlight in place.
    2. Use the Torx T25 screwdriver to remove the two screws that hold the headlight assembly in place.
    3. Use the wedge tool to pry the headlight assembly away from the vehicle.
    4. Carefully remove the headlight assembly from the vehicle.

    Installing the New Headlights

    To install the new headlights, follow these steps:

    1. Align the new headlight assembly with the vehicle.
    2. Insert the two screws that hold the headlight assembly in place.
    3. Tighten the screws with the Torx T25 screwdriver.
    4. Insert the two screws that hold the headlight in place.
    5. Tighten the screws with the Phillips head screwdriver.

    You have now successfully changed the headlight on a 2017 Chevy Equinox. By following these steps, you can save yourself time and money by doing it yourself.

    Removing the Headlights

    To remove the headlights on a 2017 Chevy Equinox, you will need the following tools:

    • Phillips head screwdriver
    • Torx T25 screwdriver
    • Wedge tool

    1. Open the hood of the Equinox.
    2. Locate the two screws that hold each headlight in place. These screws are located behind the headlight assembly, near the top of the fender.
    3. Use the Phillips head screwdriver to remove the two screws.
    4. Locate the two Torx screws that hold the headlight assembly in place. These screws are located behind the headlight assembly, near the bottom of the fender.
    5. Use the Torx T25 screwdriver to remove the two Torx screws.
    6. Use the wedge tool to pry the headlight assembly away from the vehicle.
    7. Carefully remove the headlight assembly from the vehicle.

    Installing the New Headlights

    To install the new headlights on a 2017 Chevy Equinox, you will need the following tools:

    • Phillips head screwdriver
    • Torx T25 screwdriver
    • Wedge tool

    1. Align the new headlight assembly with the vehicle.
    2. Insert the two screws that hold each headlight in place.
    3. Use the Phillips head screwdriver to tighten the two screws.
    4. Insert the two Torx screws that hold the headlight assembly in place.
    5. Use the Torx T25 screwdriver to tighten the two Torx screws.
    6. Use the wedge tool to push the headlight assembly into place.
    7. Close the hood of the Equinox.

    By following these steps, you can easily remove and install the headlights on your 2017 Chevy Equinox. This is a relatively simple task that can be completed in about 30 minutes. If you have any questions, please consult your owner’s manual or a qualified mechanic.

    How to Change Headlight on a 2017 Chevy Equinox?

    1. What tools do I need?

    • A Phillips head screwdriver
    • A flathead screwdriver
    • A new headlight bulb

    2. How do I access the headlight?
    1. Open the hood of your vehicle.
    2. Locate the headlight assembly on the side of the vehicle where you want to replace the bulb.
    3. Remove the plastic cover that protects the headlight bulb.
    4. Disconnect the electrical connector from the back of the headlight bulb.

    3. How do I remove the old headlight bulb?
    1. Use the Phillips head screwdriver to loosen the two screws that hold the headlight bulb in place.
    2. Pull the headlight bulb straight out of the headlight assembly.

    4. How do I install the new headlight bulb?
    1. Insert the new headlight bulb into the headlight assembly.
    2. Secure the headlight bulb in place with the two screws.
    3. Reconnect the electrical connector to the back of the headlight bulb.
    4. Replace the plastic cover that protects the headlight bulb.

    5. How do I test the new headlight bulb?
    1. Turn on the headlights of your vehicle.
    2. Check to make sure that the new headlight bulb is working properly.

    Additional tips:

    • When replacing a headlight bulb, it is important to use the correct type of bulb for your vehicle. You can find the correct bulb type in your vehicle’s owner’s manual.
    • Be careful not to touch the glass of the headlight bulb with your bare hands. The oils from your skin can damage the bulb.
    • If you are having trouble replacing the headlight bulb, you can take your vehicle to a qualified auto repair shop.

      Changing the headlight on a 2017 Chevy Equinox is a relatively simple task that can be completed in about 30 minutes. By following the steps outlined in this article, you can safely and effectively replace your headlights and ensure that your Equinox is properly illuminated on the road.

    Here are the key takeaways from this article:

    • The first step is to locate the headlight housing. It is located on the front of the vehicle, behind the grille.
    • Once you have located the headlight housing, you will need to remove the plastic cover. This can be done by prying it off with a flathead screwdriver.
    • Next, you will need to disconnect the electrical connector. This is a small, black connector located at the back of the headlight housing.
    • Now you can remove the headlight housing. To do this, you will need to loosen the two bolts that secure it in place.
    • Once the headlight housing is removed, you can replace the headlight bulb. Be sure to match the new bulb to the old one.
    • Finally, you can reinstall the headlight housing and reconnect the electrical connector.

    By following these steps, you can safely and effectively replace the headlights on your 2017 Chevy Equinox.

    Author Profile

    Carla Denker
    Carla Denker
    Carla Denker first opened Plastica Store in June of 1996 in Silverlake, Los Angeles and closed in West Hollywood on December 1, 2017. PLASTICA was a boutique filled with unique items from around the world as well as products by local designers, all hand picked by Carla. Although some of the merchandise was literally plastic, we featured items made out of any number of different materials.

    Prior to the engaging profile in west3rdstreet.com, the innovative trajectory of Carla Denker and PlasticaStore.com had already captured the attention of prominent publications, each one spotlighting the unique allure and creative vision of the boutique. The acclaim goes back to features in Daily Candy in 2013, TimeOut Los Angeles in 2012, and stretched globally with Allure Korea in 2011. Esteemed columns in LA Times in 2010 and thoughtful pieces in Sunset Magazine in 2009 highlighted the boutique’s distinctive character, while Domino Magazine in 2008 celebrated its design-forward ethos. This press recognition dates back to the earliest days of Plastica, with citations going back as far as 1997, each telling a part of the Plastica story.

    After an illustrious run, Plastica transitioned from the tangible to the intangible. While our physical presence concluded in December 2017, our essence endures. Plastica Store has been reborn as a digital haven, continuing to serve a community of discerning thinkers and seekers. Our new mission transcends physical boundaries to embrace a world that is increasingly seeking knowledge and depth.

Similar Posts