How To Change Batteries In Swiffer Wetjet?

How to Change Batteries in a Swiffer WetJet

Your Swiffer WetJet is a handy cleaning tool, but it won’t work without batteries. When the batteries start to die, you’ll notice that the cleaning pad doesn’t get as wet and the floors don’t get as clean. If you’re not sure how to change the batteries in your Swiffer WetJet, don’t worry, we’re here to help.

In this article, we’ll walk you through the steps of changing the batteries in your Swiffer WetJet. We’ll also provide some tips on how to keep your Swiffer WetJet in good condition so that it lasts for years to come.

So, if your Swiffer WetJet is starting to lose its power, read on for instructions on how to change the batteries and keep your cleaning tool in top condition.

Step	Instructions	Image
1	Turn off the Swiffer Wetjet and unplug it from the outlet.
2	Locate the battery compartment on the bottom of the Swiffer Wetjet.
3	Use a coin to pry open the battery compartment.
4	Remove the old batteries.
5	Insert the new batteries, making sure to match the positive and negative terminals.
6	Close the battery compartment.
7	Plug the Swiffer Wetjet back into the outlet and turn it on.

This guide will show you how to change the batteries in your Swiffer WetJet. The process is quick and easy, and can be completed in just a few minutes.

Tools and Materials

• Phillips head screwdriver
• New batteries (4 AA batteries)

Step-by-step Instructions

1. Turn off the Swiffer WetJet and unplug it from the outlet.
2. Locate the battery compartment on the bottom of the unit.
3. Use the Phillips head screwdriver to remove the two screws that hold the battery cover in place.
4. Remove the battery cover.
5. Remove the old batteries from the battery compartment.
6. Insert the new batteries into the battery compartment, making sure to align the positive and negative terminals correctly.
7. Replace the battery cover and tighten the screws.
8. Turn on the Swiffer WetJet and test it to make sure it is working properly.

That’s it! You have now successfully changed the batteries in your Swiffer WetJet.

Here are some additional tips for changing the batteries in your Swiffer WetJet:

• Make sure to use the correct type of batteries. The Swiffer WetJet requires 4 AA batteries.
• Be careful not to drop the batteries into the battery compartment. If you do, carefully remove them using the Phillips head screwdriver.
• Do not mix old and new batteries. Always use all new batteries in the battery compartment.
• If the Swiffer WetJet is not working properly after you have changed the batteries, try resetting it. To do this, unplug the unit from the outlet and then plug it back in.

How To Change Batteries In Swiffer Wetjet?

The Swiffer Wetjet is a popular cleaning tool that uses disposable cleaning pads and a water reservoir to clean floors. However, the batteries in the Swiffer Wetjet can eventually die, and you will need to replace them. This guide will show you how to change the batteries in your Swiffer Wetjet in just a few simple steps.

1. Gather your materials

Before you begin, you will need to gather the following materials:

• A Phillips head screwdriver
• Two new AA batteries

2. Turn off the Swiffer Wetjet and unplug it from the electrical outlet

Before you can change the batteries in your Swiffer Wetjet, you will need to turn it off and unplug it from the electrical outlet. This will prevent you from accidentally getting shocked.

3. Remove the battery cover located on the bottom of the unit

The battery cover on the Swiffer Wetjet is located on the bottom of the unit. To remove it, you will need to use a Phillips head screwdriver to loosen the two screws that hold it in place. Once the screws are loose, you can lift up the battery cover and remove it.

4. Remove the old batteries

Once the battery cover is removed, you will be able to see the old batteries. To remove them, you will need to gently pry them up with your fingers or a small flathead screwdriver. Be careful not to damage the battery terminals.

**Note:** If the batteries are stuck, you can try using a hair dryer on low heat to loosen them.

5. Insert the new batteries

Once the old batteries are removed, you can insert the new batteries into the battery compartment. Make sure that the positive and negative terminals are aligned correctly.

6. Replace the battery cover

Once the new batteries are inserted, you can replace the battery cover. To do this, simply line up the tabs on the battery cover with the slots on the unit and press down until the cover snaps into place.

7. Turn on the Swiffer Wetjet and plug it back into the electrical outlet

Now that you have replaced the batteries in your Swiffer Wetjet, you can turn it on and plug it back into the electrical outlet. The unit should now be working properly.

Changing the batteries in your Swiffer Wetjet is a simple process that can be completed in just a few minutes. By following these steps, you can keep your Swiffer Wetjet running smoothly and efficiently.

Here are some additional tips for maintaining your Swiffer Wetjet:

• Clean the water reservoir regularly to prevent the growth of mold and bacteria.
• Replace the cleaning pads when they are dirty or damaged.
• Store the Swiffer Wetjet in a cool, dry place when not in use.

By following these tips, you can extend the life of your Swiffer Wetjet and keep your floors clean and fresh.

How do I change the batteries in my Swiffer WetJet?

1. Turn off the Swiffer WetJet and unplug it from the outlet.
2. Remove the battery cover on the back of the unit.
3. Remove the old batteries.
4. Insert the new batteries, making sure to match the positive and negative terminals.
5. Replace the battery cover.
6. Plug the Swiffer WetJet back into the outlet and turn it on.

What type of batteries does the Swiffer WetJet take?

The Swiffer WetJet takes two AA batteries.

How long do the batteries last in the Swiffer WetJet?

The batteries in the Swiffer WetJet typically last for about six months. However, this may vary depending on how often you use the unit and how long you use it for each time.

What happens if the batteries in the Swiffer WetJet run out?

If the batteries in the Swiffer WetJet run out, the unit will stop working. You will need to replace the batteries in order to use the unit again.

How do I know if the batteries in my Swiffer WetJet are running low?

There are a few ways to tell if the batteries in your Swiffer WetJet are running low.

• The unit may start to make a beeping noise.
• The unit may start to slow down.
• The unit may stop working altogether.

If you notice any of these signs, it is time to replace the batteries in your Swiffer WetJet.

In this blog post, we have discussed how to change batteries in a Swiffer Wetjet. We have provided step-by-step instructions, as well as images to help you visualize the process. We hope this information has been helpful, and that you are now able to change the batteries in your Swiffer Wetjet with ease.

Here are a few key takeaways from this blog post:

• To change the batteries in a Swiffer Wetjet, you will need to remove the battery cover, remove the old batteries, and insert the new batteries.
• The battery cover is located on the bottom of the Swiffer Wetjet.
• The old batteries are held in place by a small tab.
• The new batteries should be inserted with the positive side facing up.
• Once the new batteries are inserted, replace the battery cover.

We hope this information has been helpful. If you have any other questions about how to use your Swiffer Wetjet, please consult the user manual.