How To Change A Dometic Thermostat From Celsius To Fahrenheit?

How to Change a Dometic Thermostat from Celsius to Fahrenheit

Your Dometic thermostat is a valuable tool for keeping your RV comfortable, but what if you need to change the temperature setting from Celsius to Fahrenheit? Don’t worry, it’s a simple process that only takes a few minutes.

In this article, we’ll walk you through the steps of changing your Dometic thermostat from Celsius to Fahrenheit. We’ll also provide some tips on how to use your thermostat effectively to keep your RV at the perfect temperature.

So, if you’re ready to learn how to change your Dometic thermostat, read on!

Step	Instructions	Image
1	Locate the thermostat. It is typically located on the wall near the furnace or water heater.
2	Press the “Mode” button until the display shows “F” or “F”.
3	Press the “Set” button to save your changes.

This guide will show you how to change the temperature setting on a Dometic thermostat from Celsius to Fahrenheit. This process is relatively simple, but it is important to follow the steps carefully to avoid damaging the thermostat.

Tools and Materials

• Phillips head screwdriver
• Tape measure
• Thermometer

Locating the Thermostat

The thermostat is typically located on the inside of the refrigerator or freezer. It is a small, rectangular box with a digital display.

Changing the Temperature Setting

1. Turn off the power to the refrigerator or freezer.
2. Locate the thermostat.
3. Use the Phillips head screwdriver to remove the screws that secure the thermostat to the refrigerator or freezer.
4. Carefully remove the thermostat from the refrigerator or freezer.
5. Use the tape measure to measure the distance between the two mounting holes on the thermostat.
6. Find a new thermostat that is the same size as the old thermostat.
7. Remove the old thermostat from the new thermostat.
8. Install the new thermostat in the refrigerator or freezer.
9. Secure the thermostat to the refrigerator or freezer with the Phillips head screwdriver.
10. Turn on the power to the refrigerator or freezer.

Testing the Thermostat

Once you have installed the new thermostat, you should test it to make sure it is working properly.

1. Place a thermometer in the refrigerator or freezer.
2. Set the thermostat to the desired temperature.
3. Wait 24 hours.
4. Check the thermometer to make sure the temperature is accurate.

If the temperature is not accurate, you may need to adjust the thermostat setting.

Changing the temperature setting on a Dometic thermostat is a relatively simple process. By following the steps in this guide, you can easily change the temperature setting from Celsius to Fahrenheit.

How to Change a Dometic Thermostat from Celsius to Fahrenheit

Dometic thermostats are used in a variety of refrigerators, freezers, and other appliances. The thermostat controls the temperature inside the appliance by turning the compressor on and off. The thermostat has a temperature scale that can be set in either Celsius or Fahrenheit.

To change the temperature scale on a Dometic thermostat, follow these steps:

1. Locate the thermostat. The thermostat is usually located on the inside of the appliance, near the top.
2. Press and hold the “Mode” button. The display will show the current temperature scale.
3. Press and release the “Mode” button until the desired temperature scale is displayed.
4. Release the “Mode” button. The thermostat will be set to the new temperature scale.

Changing the Temperature Scale

To change the temperature scale on a Dometic thermostat, press and hold the “Mode” button until the display changes to “Celsius” or “Fahrenheit.”

Press the “Mode” button again to confirm your selection.

Testing the Thermostat

After changing the temperature scale, use a thermometer to check the temperature inside the refrigerator or freezer.

The temperature should be accurate to within a few degrees.

Changing the temperature scale on a Dometic thermostat is a simple process. By following these steps, you can easily change the temperature scale to your desired setting.

How do I change a Dometic thermostat from Celsius to Fahrenheit?

1. Locate the thermostat. The thermostat is typically located on the wall near the refrigerator. It may be a round dial or a digital display.
2. Press and hold the Mode button. The Mode button is usually located in the center of the thermostat. Hold the button down for about 5 seconds.
3. Use the arrow buttons to select Fahrenheit. The arrow buttons are located on either side of the Mode button. Press the up arrow button to select Fahrenheit.
4. Release the Mode button. The thermostat will now be set to Fahrenheit.

What if my Dometic thermostat doesn’t have a Mode button?

If your Dometic thermostat doesn’t have a Mode button, you can still change the temperature setting from Celsius to Fahrenheit. Here’s how:

1. Locate the Temp button. The Temp button is usually located at the top of the thermostat.
2. Press and hold the Temp button. Hold the button down for about 5 seconds.
3. Use the arrow buttons to select Fahrenheit. The arrow buttons are located on either side of the Temp button. Press the up arrow button to select Fahrenheit.
4. Release the Temp button. The thermostat will now be set to Fahrenheit.

What if I accidentally change the temperature setting to Fahrenheit?

If you accidentally change the temperature setting to Fahrenheit, you can easily change it back to Celsius. Here’s how:

1. Locate the Mode button. The Mode button is usually located in the center of the thermostat.
2. Press and hold the Mode button. Hold the button down for about 5 seconds.
3. Use the arrow buttons to select Celsius. The arrow buttons are located on either side of the Mode button. Press the down arrow button to select Celsius.
4. Release the Mode button. The thermostat will now be set to Celsius.

Can I change the temperature setting on my Dometic thermostat while the refrigerator is running?

Yes, you can change the temperature setting on your Dometic thermostat while the refrigerator is running. However, it is important to note that the refrigerator may take some time to reach the new temperature setting.

In this blog post, we have discussed how to change a Dometic thermostat from Celsius to Fahrenheit. We have provided step-by-step instructions on how to do this, as well as some tips and tricks to help you along the way. We hope that this information has been helpful, and that you are now able to change your Dometic thermostat with ease.

Here are some key takeaways from this blog post:

• To change the temperature setting on a Dometic thermostat, you will need to locate the thermostat and press the “Mode” button until the desired temperature setting is displayed.
• If you want to change the temperature scale from Celsius to Fahrenheit, you will need to hold down the “Mode” button for about 5 seconds until the temperature scale changes.
• You can also use the “+” and “-” buttons to adjust the temperature setting in either Celsius or Fahrenheit.
• If you are having trouble changing the temperature setting on your Dometic thermostat, you can consult the owner’s manual for more information.