How To Blow Out Inground Pool Lines?

How to Blow Out Inground Pool Lines

Your inground pool is a source of enjoyment and relaxation, but it can also be a lot of work to maintain. One of the most important tasks is to blow out the pool lines every few months. This helps to prevent clogs and keep your pool water clean and clear.

Blowing out your pool lines is a relatively simple process, but it’s important to do it correctly. In this article, we’ll walk you through the steps involved, so you can safely and effectively blow out your pool lines and keep your pool in top condition.

What is Blowing Out Pool Lines?

Blowing out pool lines is the process of clearing debris from the pipes that connect your pool to the main drain. This debris can include leaves, dirt, and other small objects that can clog the pipes and prevent water from flowing freely.

Blowing out your pool lines is important for several reasons. First, it helps to prevent clogs. When debris builds up in the pipes, it can restrict the flow of water and cause your pool to drain slowly. This can lead to water pooling at the bottom of the pool, which can create a breeding ground for bacteria.

Second, blowing out your pool lines helps to keep your pool water clean and clear. When debris is allowed to build up in the pipes, it can eventually break down and release harmful chemicals into the water. These chemicals can irritate your skin and eyes, and they can also make your pool water cloudy.

Finally, blowing out your pool lines helps to extend the life of your pool equipment. When debris is allowed to build up in the pipes, it can cause the pump and filter to work harder than necessary. This can shorten the lifespan of these important pieces of equipment.

How to Blow Out Pool Lines

Blowing out your pool lines is a relatively simple process, but it’s important to do it correctly. Here are the steps involved:

1. Turn off the power to the pool pump and filter. This will prevent any electrical hazards.
2. Disconnect the hose from the pool pump.
3. Attach the hose to the air compressor.
4. Turn on the air compressor and slowly increase the pressure until you see water coming out of the hose.
5. Continue blowing out the lines until all of the debris has been removed.
6. Turn off the air compressor and disconnect the hose.
7. Reconnect the hose to the pool pump and turn on the power.

That’s it! You’ve now successfully blown out your pool lines. By following these simple steps, you can help to keep your pool clean, clear, and free of debris.

Step	Instructions	Image
1	Turn off the pump and disconnect the hose from the skimmer.
2	Attach a garden hose to the air valve on the side of the pool pump.
3	Turn on the garden hose and let it run until all of the air is out of the lines.
4	Reconnect the hose to the skimmer and turn on the pump.

Tools and Materials Needed

To blow out your inground pool lines, you will need the following tools and materials:

• A garden hose
• A pressure washer
• A blower attachment for the pressure washer
• A bucket
• A hose clamp
• A garden hose nozzle
• A safety eyewear
• A pair of gloves

Steps to Blow Out Inground Pool Lines

1. Turn off the power to the pool pump. This will prevent any water from being pumped back into the pool while you are blowing out the lines.
2. Disconnect the hose from the pool pump. You will need to do this so that you can attach the hose to the pressure washer.
3. Attach the blower attachment to the pressure washer. Make sure that the blower attachment is securely attached to the pressure washer before you continue.
4. Turn on the pressure washer and set the pressure to a low setting. You do not want to use too much pressure, as this could damage the pool lines.
5. Place the end of the hose in the bucket. This will help to catch any water that is blown out of the lines.
6. Start blowing out the lines. Begin by blowing out the lines that are closest to the pump. This will help to prevent any water from backing up into the pool.
7. Continue blowing out the lines until all of the water has been removed. You may need to move the hose around to different areas of the pool to ensure that all of the lines are clear.
8. Turn off the pressure washer and disconnect the hose. Once you have finished blowing out the lines, you can turn off the pressure washer and disconnect the hose.
9. Reconnect the hose to the pool pump. Make sure that the hose is securely connected to the pool pump before you turn on the power.
10. Turn on the power to the pool pump. Once the hose is connected to the pool pump, you can turn on the power. The pool should start filling up with water.

Blowing out your inground pool lines is an important task that should be done regularly to prevent any water from backing up into the pool. By following these steps, you can easily and safely blow out your inground pool lines.

3. Common Problems and Solutions

There are a few common problems that can occur when blowing out your inground pool lines. Here are some of the most common problems and solutions:

• The pump won’t start. This is usually caused by a problem with the breaker or the pump itself. Check to make sure that the breaker is turned on and that the pump is plugged in properly. If the pump is still not starting, you may need to call a professional to fix it.
• The water is coming out of the pool too slowly. This is usually caused by a clog in the lines. You can try to clear the clog by using a garden hose or a plumbing snake. If you can’t clear the clog yourself, you may need to call a professional.
• The water is coming out of the pool with air bubbles. This is usually caused by a leak in the lines. You can try to find the leak by looking for bubbles in the water. If you can’t find the leak yourself, you may need to call a professional.
• The water is coming out of the pool dirty. This is usually caused by dirt or debris in the lines. You can try to clean the lines by using a garden hose or a plumbing snake. If you can’t clean the lines yourself, you may need to call a professional.

Here are some tips for preventing problems when blowing out your inground pool lines:

• Keep the lines clean. Make sure to clean the lines regularly to prevent dirt and debris from building up. You can do this by using a garden hose or a plumbing snake.
• Inspect the lines regularly. Inspect the lines regularly for leaks or other problems. If you find a problem, fix it right away to prevent it from getting worse.
• Use a quality pump. Make sure to use a quality pump that is designed for blowing out inground pool lines. A good pump will help to prevent problems and ensure that the job is done quickly and efficiently.

4. Tips for Winterizing Your Inground Pool

Winterizing your inground pool is important to protect it from damage and keep it safe for next season. Here are some tips for winterizing your inground pool:

• Empty the water. The first step is to empty the water from your pool. This will help to prevent damage to the pool and the pool equipment. You can empty the water by using a pool pump or a submersible pump.
• Clean the pool. Once the water is empty, clean the pool thoroughly. This will remove any dirt, debris, or algae that may be growing in the pool. You can clean the pool with a pool brush, a pool vacuum, or a pool cleaner.
• Cover the pool. Once the pool is clean, cover it with a pool cover. A pool cover will help to protect the pool from debris, animals, and the elements. You can choose from a variety of different pool covers, so choose one that is right for your pool.
• Winterize the pool equipment. Winterize the pool equipment by following the manufacturer’s instructions. This will help to protect the equipment from damage.

Here are some additional tips for winterizing your inground pool:

• Turn off the pump and filter. Turn off the pump and filter before you empty the pool. This will help to prevent damage to the pump and filter.
• Blower out the lines. Blow out the lines to remove any water that may be left in the lines. This will help to prevent freeze damage.
• Adjust the water level. Adjust the water level so that it is about 6 inches below the skimmer. This will help to prevent the pool from freezing.
• Add a winterizing chemical. Add a winterizing chemical to the pool to help protect it from freeze damage.

By following these tips, you can help to protect your inground pool from damage and keep it safe for next season.

Blowing out your inground pool lines is an important part of winterizing your pool. By following these tips, you can prevent problems and keep your pool safe for next season.

How do I know if my pool lines need to be blown out?

• Signs that your pool lines need to be blown out:
• Your pool water is cloudy or murky
• You have a strong chlorine smell in your pool
• Your pool filter is not working properly
• You see bubbles coming from your pool lines
• Your pool water is not heating up properly

How do I blow out my pool lines?

1. Turn off the power to your pool pump.
2. Disconnect the hose from the pool pump and attach it to the air compressor.
3. Turn on the air compressor and slowly open the valve on the hose until you see air bubbles coming out of the pool lines.
4. Continue blowing out the lines until all of the water has been removed.
5. Turn off the air compressor and disconnect the hose from the pool pump.
6. Turn on the power to your pool pump and let it run for several hours to circulate the water and flush out any remaining air.

How often should I blow out my pool lines?

It is recommended to blow out your pool lines every 3-4 months, or more often if you have a lot of leaves or debris in your pool.

What can I do if I have a clogged pool line?

If you have a clogged pool line, you can try to clear it by using a pool line auger. A pool line auger is a long, flexible tool that is inserted into the pool line and used to push through any debris that is blocking the line. If you are unable to clear the clog yourself, you may need to call a professional pool service company.

What are the risks of not blowing out my pool lines?

If you do not blow out your pool lines regularly, you may experience the following problems:

• Cloudy or murky pool water: If your pool lines are clogged with debris, it can prevent the water from circulating properly, which can lead to cloudy or murky pool water.
• Strong chlorine smell: If your pool lines are not properly cleaned, the chlorine in your pool water can react with the organic matter in the lines and create a strong chlorine smell.
• A malfunctioning pool filter: If your pool lines are clogged, it can put a strain on your pool filter and cause it to malfunction.
• Bubbles coming from your pool lines: If your pool lines are leaking, you may see bubbles coming from the lines.
• Your pool water not heating up properly: If your pool lines are clogged, it can prevent the water from circulating properly, which can make it difficult to heat your pool water.

  there are a few key things to remember when blowing out your inground pool lines. First, make sure that you have the right tools and equipment. Second, follow the steps in the guide carefully. Third, be patient and don’t rush the process. If you do these things, you should be able to successfully blow out your inground pool lines and keep your pool clean and healthy all season long.

Here are a few key takeaways from this article:

• Blowing out your inground pool lines is an important part of pool maintenance. It helps to remove dirt, debris, and algae from the lines, which can help to prevent clogs and keep your pool water clean.
• To blow out your inground pool lines, you will need a garden hose, a pressure washer, a blower, and a set of pool noodles.
• The steps to blowing out your inground pool lines are as follows:

1. Turn off the power to the pool pump.
2. Disconnect the hose from the pool pump.
3. Attach the hose to the pressure washer.
4. Turn on the pressure washer and direct the stream of water into the pool lines.
5. Use the blower to blow air through the pool lines.
6. Reattach the hose to the pool pump.
7. Turn on the power to the pool pump.

• Blowing out your inground pool lines should be done every few months, or as needed.