How To Adjust Fiskars Pruning Shears?

How to Adjust Fiskars Pruning Shears

Fiskars pruning shears are a popular choice for gardeners of all levels, thanks to their sharp blades and comfortable handles. However, over time, the blades may become dull or misaligned, which can make it difficult to prune branches. If you’re experiencing this problem, you may need to adjust the shears.

Adjusting Fiskars pruning shears is a simple process that can be completed in just a few minutes. To get started, follow these steps:

1. Locate the adjustment screw. The adjustment screw is located on the back of the shears, near the pivot point. It is a small, Phillips-head screw.
2. Use a Phillips-head screwdriver to loosen the adjustment screw. Turn the screw counterclockwise until the blades are slightly loose.
3. Adjust the blades. Use your fingers to gently move the blades closer together or farther apart, until they are aligned properly.
4. Retighten the adjustment screw. Turn the screw clockwise until the blades are secure.

Once you have adjusted the blades, test the shears by cutting a small branch. The blades should cut through the branch smoothly and without any resistance.

If you are unable to adjust the blades yourself, you can take your shears to a hardware store or gardening center. A qualified technician will be able to adjust the shears for you.

Troubleshooting

If you are having trouble adjusting your Fiskars pruning shears, there are a few things you can check. First, make sure that you are using the correct screwdriver. The adjustment screw is a Phillips-head screw, so you will need a Phillips-head screwdriver to loosen or tighten it.

If you are using the correct screwdriver and the blades are still not aligned properly, you may need to clean the shears. Over time, dirt and debris can build up on the blades, which can prevent them from moving smoothly. To clean the shears, use a soft cloth to wipe down the blades and pivot point.

If you have cleaned the shears and they are still not working properly, you may need to replace them. Fiskars pruning shears are made with high-quality materials, but they can eventually wear out. If your shears are more than a few years old, it is likely time for a new pair.

Additional Tips

Here are a few additional tips for using and maintaining your Fiskars pruning shears:

• Sharpen the blades regularly. Dull blades can make it difficult to prune branches, and they can also damage the branches. To keep your shears sharp, sharpen them with a whetstone or a sharpening tool every few months.
• Clean the shears after each use. Wipe down the blades and pivot point with a soft cloth to remove any dirt or debris. This will help to prevent the shears from becoming damaged.
• Store the shears in a safe place. When you are not using your shears, store them in a safe place where they will not be damaged. Avoid storing them in direct sunlight or in damp conditions.

By following these tips, you can keep your Fiskars pruning shears in good condition for years to come.

Fiskars pruning shears are a valuable tool for any gardener. By following these tips, you can keep your shears in good condition and enjoy years of use.

How do I adjust Fiskars Pruning Shears?

1. To adjust the cutting pressure, turn the adjustment screw clockwise to increase the pressure or counterclockwise to decrease the pressure.
2. To adjust the blade alignment, loosen the locking screw and slide the blades until they are aligned. Tighten the locking screw to secure the blades in place.
3. To sharpen the blades, use a file or sharpening stone to remove any burrs or nicks. Be sure to sharpen both blades evenly.
4. To clean the blades, wipe them down with a dry cloth. Do not use water or any other liquid to clean the blades, as this could damage them.

What are the common problems with Fiskars Pruning Shears?

• The blades are not aligned. This can cause the shears to bind and make it difficult to cut branches. To fix this, loosen the locking screw and slide the blades until they are aligned. Tighten the locking screw to secure the blades in place.
• The blades are dull. This can make it difficult to cut branches and can also damage the branches. To fix this, sharpen the blades with a file or sharpening stone. Be sure to sharpen both blades evenly.
• The shears are difficult to open and close. This can be caused by a number of things, including rust, dirt, or dried sap. To fix this, clean the shears with a dry cloth and lubricate the pivot point with a light oil.

How can I prevent problems with my Fiskars Pruning Shears?

• Keep the shears clean and lubricated. This will help to prevent rust, dirt, and dried sap from building up on the shears and causing them to malfunction.
• Sharpen the blades regularly. This will help to keep the shears cutting efficiently and prevent them from damaging the branches.
• Store the shears in a dry place. This will help to prevent rust from forming on the shears.

What is the warranty on Fiskars Pruning Shears?

Fiskars Pruning Shears come with a limited warranty of two years. This warranty covers defects in materials or workmanship.

Where can I find replacement parts for my Fiskars Pruning Shears?

You can find replacement parts for your Fiskars Pruning Shears at a number of online retailers or by contacting Fiskars customer service.

How do I contact Fiskars customer service?

You can contact Fiskars customer service by calling 1-800-435-4673 or by visiting their website at www.fiskars.com.

In this blog post, we have discussed how to adjust Fiskars pruning shears. We have covered the different parts of the shears, how to identify if they need to be adjusted, and the steps involved in adjusting them. We hope that this information has been helpful and that you are now able to adjust your Fiskars pruning shears with ease.

Here are some key takeaways:

• Fiskars pruning shears have two parts: the blade and the handle.
• The blade is sharpened on one side and serrated on the other.
• The handle is made of plastic or metal.
• The screws that hold the blade and handle together can be loosened or tightened to adjust the tension of the shears.
• If the shears are too tight, they will be difficult to use and may damage the branches you are cutting.
• If the shears are too loose, they will not cut through branches effectively.
• To adjust the shears, loosen the screws on the handle with a screwdriver.
• Move the blade up or down until the tension is correct.
• Tighten the screws to secure the blade in place.

By following these steps, you can easily adjust your Fiskars pruning shears to ensure that they are working properly and that you are able to cut through branches with ease.