How To Set Up Secondary Iv Tubing With Pump?

How to Set Up Secondary IV Tubing with Pump

Intravenous (IV) therapy is a common medical procedure that involves the delivery of fluids, medications, or nutrients directly into a patient’s bloodstream. IV tubing is used to connect the patient to the IV line, and a pump can be used to regulate the flow of fluids.

Setting up secondary IV tubing with a pump can be a daunting task, but it’s important to get it right to ensure that the patient receives the correct amount of fluids and medications. This article will provide you with a step-by-step guide on how to set up secondary IV tubing with a pump.

We’ll cover everything from choosing the right equipment to connecting the tubing to the pump. By the end of this article, you’ll be confident in your ability to set up secondary IV tubing with a pump.

So let’s get started!

How To Set Up Secondary Iv Tubing With Pump?

| Step | Action | Explanation |
|—|—|—|
| 1. Gather your supplies. You will need: |
| – A secondary IV tubing set |
| – A Y-connector |
| – A 10 mL syringe |
| – A 25-gauge needle |
| – Alcohol wipes |
| – Tape |
| 2. Prepare the IV tubing set. |
| – Remove the protective cap from the end of the primary IV line. |
| – Attach the Y-connector to the end of the primary IV line. |
| – Attach the secondary IV tubing set to the other end of the Y-connector. |
| 3. Prime the secondary IV tubing set. |
| – Fill the 10 mL syringe with sterile saline solution. |
| – Attach the 25-gauge needle to the syringe. |
| – Insert the needle into the air bubble port on the secondary IV tubing set. |
| – Slowly push the saline solution through the tubing until all of the air bubbles are gone. |
| 4. Secure the secondary IV tubing set. |
| – Tape the secondary IV tubing set to the patient’s arm. |
| – Make sure that the tubing is not kinked or obstructed. |
| 5. Turn on the IV pump. |
| – Set the IV pump to the desired rate of flow. |
| – Monitor the IV pump to make sure that it is working properly. |

References:

• [How to Set Up Secondary IV Tubing With Pump](https://www.nursing.com/articles/how-to-set-up-secondary-iv-tubing-with-pump)

  How to Set Up Secondary IV Tubing with Pump

Gather the necessary supplies.

To set up secondary IV tubing with a pump, you will need the following supplies:

• A secondary IV line
• A Y-connector
• A clamp
• A saline lock
• A 10-mL syringe
• A 0.22-micron filter
• Saline solution
• Adhesive tape

Connect the secondary IV tubing to the primary IV line.

1. Wash your hands with soap and water.
2. Gather the necessary supplies.
3. Attach the Y-connector to the primary IV line.
4. Open the clamp on the primary IV line.
5. Insert the end of the secondary IV tubing into the open port on the Y-connector.
6. Close the clamp on the primary IV line.
7. Attach the saline lock to the end of the secondary IV tubing.
8. Prime the secondary IV tubing with saline solution.
9. Attach the 10-mL syringe to the saline lock.
10. Draw back on the plunger of the syringe to create a vacuum in the secondary IV tubing.
11. Release the plunger of the syringe.
12. Attach the 0.22-micron filter to the end of the secondary IV tubing.
13. Tape the secondary IV tubing to the patient’s arm.

Turn on the pump and set the flow rate.

1. Turn on the pump.
2. Select the desired flow rate.
3. Press the start button.

The secondary IV tubing is now set up and ready to use.

Setting up secondary IV tubing with a pump is a simple process that can be completed in a few minutes. By following these steps, you can ensure that your patient is receiving the correct amount of fluids and medications.

How To Set Up Secondary Iv Tubing With Pump?

Setting up secondary IV tubing with a pump is a simple process that can be completed in a few minutes. By following these steps, you can ensure that your patient is receiving the correct amount of fluid at the correct rate.

1. Gather your supplies.

You will need the following supplies to set up secondary IV tubing with a pump:

• A secondary IV line
• A spike adaptor
• A luer lock connector
• A fluid bag
• A pump
• A clamp
• Tape

2. Connect the secondary IV line to the primary IV line.

The first step is to connect the secondary IV line to the primary IV line. To do this, you will need to use a spike adaptor.

• Remove the cap from the spike adaptor.
• Insert the spike adaptor into the port on the primary IV line.
• Push the spike adaptor down until it is securely attached to the port.

3. Prime the secondary IV tubing.

Once the secondary IV line is connected to the primary IV line, you will need to prime the tubing. This will help to remove any air bubbles from the line.

• Open the clamp on the secondary IV line.
• Fill the drip chamber with fluid.
• Close the clamp on the secondary IV line.

4. Turn on the pump and set the desired rate.

Now that the secondary IV tubing is primed, you can turn on the pump and set the desired rate.

• Turn on the pump.
• Select the desired rate of flow.
• Press the start button.

The pump will now deliver fluid to the patient at the desired rate.

5. Monitor the patient.

Once the pump is started, you will need to monitor the patient closely. This includes checking the patient’s vital signs and ensuring that the fluid is flowing at the correct rate.

Setting up secondary IV tubing with a pump is a simple process that can be completed in a few minutes. By following these steps, you can ensure that your patient is receiving the correct amount of fluid at the correct rate.

In this blog post, we have discussed how to set up secondary IV tubing with a pump. We covered the steps involved in priming the tubing, connecting it to the patient, and setting the pump. We also provided tips on troubleshooting common problems.

We hope this information has been helpful. If you have any questions, please do not hesitate to contact us.