How To Set Time On Citizen Eco Drive Radio Controlled?

How to Set Time on a Citizen Eco-Drive Radio Controlled Watch

Citizen Eco-Drive radio controlled watches are a great option for those who want a stylish and accurate timepiece that requires no batteries. These watches are powered by light, and they receive time signals from radio towers around the world to keep them accurate to within a few seconds. However, if your watch loses its sync with the radio towers, or if you need to set the time manually, it’s easy to do so with just a few simple steps.

In this article, we’ll show you how to set the time on a Citizen Eco-Drive radio controlled watch. We’ll also provide some tips on how to keep your watch accurate and in sync with the radio towers.

Step	Action	Explanation
1	Pull out the crown to the first position	This will allow you to adjust the time.
2	Turn the crown clockwise to move the hour hand forward and counterclockwise to move the hour hand backward.	The hour hand will move in 24-hour increments.
3	Push the crown back in to the original position.	The time will now be set.

Step 1: Pull out the crown

To set the time on your Citizen Eco-Drive radio controlled watch, you will first need to pull out the crown. The crown is located on the right side of the watch, and it is used to set the time, date, and day.

To pull out the crown, use your thumb and forefinger to grasp the crown and gently pull it out until it stops. You will hear a click when the crown is fully extended.

Step 2: Set the time zone

Once the crown is pulled out, you can use it to set the time zone. The time zone is located on the inner bezel of the watch.

To set the time zone, rotate the crown clockwise or counterclockwise until the desired time zone is aligned with the marker at 12 o’clock.

The time zone markings are listed in alphabetical order, starting with “GMT” at the top and ending with “Hawaii-Aleutian” at the bottom.

Once the desired time zone is aligned with the marker at 12 o’clock, push the crown back in. The watch will now be set to the correct time zone.

Step 3: Set the time

To set the time, you will need to pull out the crown to the second position. The second position is indicated by a small arrow on the crown.

Once the crown is in the second position, you can use it to set the hour and minute hands.

To set the hour hand, rotate the crown clockwise or counterclockwise until the hour hand is aligned with the desired hour.

To set the minute hand, rotate the crown clockwise or counterclockwise until the minute hand is aligned with the desired minute.

Once the time is set, push the crown back in. The watch will now be set to the correct time.

Step 4: Set the date

To set the date, you will need to pull out the crown to the third position. The third position is indicated by a small arrow on the crown.

Once the crown is in the third position, you can use it to set the date.

To set the date, rotate the crown clockwise or counterclockwise until the desired date is aligned with the marker at 12 o’clock.

Once the date is set, push the crown back in. The watch will now be set to the correct date.

Step 5: Set the day

To set the day, you will need to pull out the crown to the fourth position. The fourth position is indicated by a small arrow on the crown.

Once the crown is in the fourth position, you can use it to set the day.

To set the day, rotate the crown clockwise or counterclockwise until the desired day is aligned with the marker at 12 o’clock.

Once the day is set, push the crown back in. The watch will now be set to the correct day.

Setting the time on your Citizen Eco-Drive radio controlled watch is a simple process. By following these steps, you can easily set the time, date, and day on your watch.

Step 3: Set the date

Once you have set the time, you can move on to setting the date. To do this, follow these steps:

1. Press and hold the “Mode” button until the date display appears.
2. Use the “+” and “-” buttons to adjust the date.
3. Press the “Mode” button to save your changes.

The date will be displayed in the format “MM/DD/YY”.

Step 4: Set the day

To set the day, follow these steps:

1. Press and hold the “Mode” button until the day display appears.
2. Use the “+” and “-” buttons to adjust the day.
3. Press the “Mode” button to save your changes.

The day will be displayed in the format “Sun, Mon, Tue, Wed, Thu, Fri, Sat”.

Now that you know how to set the time, date, and day on your Citizen Eco-Drive radio controlled watch, you can enjoy accurate timekeeping for years to come.

How do I set the time on my Citizen Eco-Drive radio controlled watch?

1. Turn the crown to the “H” position. This will engage the watch’s timekeeping functions.
2. Use the hour and minute hands to set the current time. The hour hand can be moved in one-hour increments, while the minute hand can be moved in one-minute increments.
3. Press the “A” button to save the time setting. The watch will beep once to confirm that the time has been set.

What if my watch loses power?

If your watch loses power, it will automatically reset to the correct time when it next receives a radio signal. However, you can also manually reset the time by following the steps below:

1. Turn the crown to the “H” position. This will engage the watch’s timekeeping functions.
2. Press and hold the “A” button for about three seconds. The watch will beep twice and the seconds hand will start to sweep.
3. Use the hour and minute hands to set the current time. The hour hand can be moved in one-hour increments, while the minute hand can be moved in one-minute increments.
4. Press the “A” button to save the time setting. The watch will beep once to confirm that the time has been set.

How do I change the time zone on my Citizen Eco-Drive radio controlled watch?

To change the time zone on your Citizen Eco-Drive radio controlled watch, follow these steps:

1. Turn the crown to the “H” position. This will engage the watch’s timekeeping functions.
2. Press and hold the “B” button for about three seconds. The watch will beep twice and the seconds hand will start to sweep.
3. Use the hour and minute hands to set the current time zone. The hour hand can be moved in one-hour increments, while the minute hand can be moved in one-minute increments.
4. Press the “B” button to save the time zone setting. The watch will beep once to confirm that the time zone has been set.

What if I travel to a different time zone?

If you travel to a different time zone, your Citizen Eco-Drive radio controlled watch will automatically adjust to the new time zone when it next receives a radio signal. However, you can also manually adjust the time zone by following the steps below:

1. Turn the crown to the “H” position. This will engage the watch’s timekeeping functions.
2. Press and hold the “B” button for about three seconds. The watch will beep twice and the seconds hand will start to sweep.
3. Use the hour and minute hands to set the current time zone. The hour hand can be moved in one-hour increments, while the minute hand can be moved in one-minute increments.
4. Press the “B” button to save the time zone setting. The watch will beep once to confirm that the time zone has been set.

What if I want to turn off the radio reception on my Citizen Eco-Drive radio controlled watch?

To turn off the radio reception on your Citizen Eco-Drive radio controlled watch, follow these steps:

1. Turn the crown to the “H” position. This will engage the watch’s timekeeping functions.
2. Press and hold the “C” button for about three seconds. The watch will beep twice and the seconds hand will start to sweep.
3. The radio reception will be turned off. The watch will beep once to confirm that the radio reception has been turned off.

setting the time on a Citizen Eco-Drive radio controlled watch is a simple process that can be completed in a few steps. By following the instructions in this guide, you can ensure that your watch is always accurate and that you never miss a beat.

Here are the key takeaways from this article:

• To set the time on a Citizen Eco-Drive radio controlled watch, you will need to:
• Press and hold the Mode button until the Timekeeping mode is displayed.
• Use the Hour and Minute buttons to set the current time.
• Press the Mode button to exit the Timekeeping mode.
• Your watch will automatically sync with the atomic clock signal when it is in a clear reception area.
• If your watch does not sync with the atomic clock signal, you can manually set the time using the instructions in this guide.

By following these steps, you can easily set the time on your Citizen Eco-Drive radio controlled watch and ensure that it is always accurate.