How To Install Plylox Hurricane Clips?

How To Install Plylox Hurricane Clips?

Plylox hurricane clips are a type of metal fastener that is used to connect plywood sheathing to a building’s framing. They are designed to resist the high winds and debris that can be generated during a hurricane. This article will provide you with step-by-step instructions on how to install plylox hurricane clips.

Overview

To install plylox hurricane clips, you will need the following materials:

• Plylox hurricane clips
• A hammer
• A drill
• A screwdriver
• A measuring tape
• A level

The steps involved in installing plylox hurricane clips are as follows:

1. Measure the distance between the studs on your building’s framing.
2. Cut the plylox hurricane clips to the appropriate length.
3. Attach the plylox hurricane clips to the plywood sheathing and the framing.
4. Repeat steps 2 and 3 for all of the plywood sheathing on your building.

By following these steps, you can install plylox hurricane clips to your building’s framing to help protect it from the high winds and debris that can be generated during a hurricane.

Step	Instructions	Image
1	Measure the distance between the rafters and cut the clips to size.
2	Install the clips on the rafters, one clip per rafter.
3	Attach the plywood to the clips using screws or nails.

How to Install Plylox Hurricane Clips?

Tools and Materials Needed

To install Plylox hurricane clips, you will need the following tools and materials:

• Plylox hurricane clips
• Hammer
• Nails
• Measuring tape
• Level
• Safety glasses

Step-by-Step Instructions

1. Measure the distance between the rafters. The rafters are the horizontal beams that support the roof. The distance between the rafters will determine the spacing of the hurricane clips.
2. Cut the hurricane clips to length. The hurricane clips should be cut to the same length as the rafters.
3. Install the hurricane clips to the rafters. The hurricane clips should be installed at the top and bottom of the rafters. The clips should be installed with the flanges facing up.
4. Nail the hurricane clips to the rafters. The hurricane clips should be nailed to the rafters with 16d nails. The nails should be driven through the flanges of the clips and into the rafters.

Tips for Installing Plylox Hurricane Clips

• Make sure that the hurricane clips are installed correctly. The clips should be installed with the flanges facing up and the nails should be driven through the flanges and into the rafters.
• Use a level to make sure that the hurricane clips are installed level.
• Wear safety glasses when installing the hurricane clips. The nails can be sharp and can cause eye injuries.

Installing Plylox hurricane clips is a simple process that can help to protect your home from hurricane winds. By following these steps, you can install the hurricane clips correctly and ensure that your home is safe from the elements.

Here are some additional tips for installing Plylox hurricane clips:

• If you are installing the hurricane clips on a new roof, it is best to install them before the shingles are installed. This will make it easier to access the rafters and will ensure that the clips are installed correctly.
• If you are installing the hurricane clips on an existing roof, you will need to remove the shingles in the area where you are installing the clips. Once the shingles are removed, you can install the clips to the rafters.
• When installing the hurricane clips, make sure that they are tight against the rafters. This will help to ensure that the clips are effective in protecting your home from hurricane winds.

By following these tips, you can install Plylox hurricane clips correctly and protect your home from hurricane winds.

How To Install Plylox Hurricane Clips?

Plylox hurricane clips are a type of metal fastener that is used to secure plywood sheathing to a building’s framing. They are designed to withstand high winds and hurricanes, and can help to prevent a building from being damaged or destroyed in a storm.

Installing plylox hurricane clips is a relatively simple process, but it is important to follow the manufacturer’s instructions carefully. The following steps will provide you with a general overview of how to install plylox hurricane clips:

1. Prepare the plywood sheathing. The plywood sheathing should be installed in accordance with the building code for your area. The plywood should be cut to size and installed so that the edges are staggered.
2. Mark the locations of the hurricane clips. The hurricane clips should be installed at every intersection of the plywood sheathing. They should also be installed at the ends of each sheet of plywood.
3. Drill pilot holes for the hurricane clips. The pilot holes should be drilled through the plywood sheathing and into the framing members. The pilot holes should be slightly smaller than the diameter of the hurricane clips.
4. Install the hurricane clips. The hurricane clips should be installed using a hammer or a nail gun. The clips should be installed so that the legs of the clips are perpendicular to the plywood sheathing.
5. Seal the hurricane clips. The hurricane clips should be sealed with a sealant to prevent water from entering the holes.

Once the hurricane clips have been installed, the plywood sheathing is ready to be covered with siding or other exterior cladding.

Troubleshooting Tips

If you are having trouble installing plylox hurricane clips, there are a few things you can check to troubleshoot the problem.

• Make sure that the plywood sheathing is installed correctly. The plywood sheathing should be installed in accordance with the building code for your area. The plywood should be cut to size and installed so that the edges are staggered.
• Make sure that the pilot holes are drilled correctly. The pilot holes should be drilled through the plywood sheathing and into the framing members. The pilot holes should be slightly smaller than the diameter of the hurricane clips.
• Make sure that the hurricane clips are installed correctly. The hurricane clips should be installed so that the legs of the clips are perpendicular to the plywood sheathing.
• Make sure that the hurricane clips are sealed correctly. The hurricane clips should be sealed with a sealant to prevent water from entering the holes.

If you are still having trouble installing plylox hurricane clips, you may need to contact a professional for assistance.

Additional Resources

The following resources provide additional information on how to install plylox hurricane clips:

• [Plylox Hurricane Clips Installation Instructions](https://plylox.com/wp-content/uploads/2019/05/Plylox-Hurricane-Clips-Installation-Instructions.pdf)
• [Building Code Requirements for Hurricane Clips](https://www.nfpa.org/codes-and-standards/all-codes-and-standards/list-of-codes-and-standards/detail?code=500)
• [Hurricane Clip Installation Tips](https://www.familyhandyman.com/project/how-to-install-hurricane-clips/)

Plylox hurricane clips are an important part of a home’s hurricane protection system. By following the steps in this guide, you can install plylox hurricane clips correctly and help to protect your home from the damaging effects of hurricanes.

How do I install Plylox Hurricane Clips?

1. Measure and cut the clips to length. The clips should be cut to the same length as the plywood sheathing.
2. Apply a bead of sealant to the back of the clips. This will help to prevent water from seeping in behind the clips.
3. Attach the clips to the sheathing with nails or screws. The clips should be installed every 16 inches on center.
4. Install the plywood sheathing over the clips. The plywood should be installed with the long edges running perpendicular to the clips.

What is the difference between Plylox Hurricane Clips and other hurricane clips?

Plylox Hurricane Clips are a patented design that provides superior strength and performance compared to other hurricane clips. They are made from high-strength steel and are designed to withstand the high winds and debris that can be generated by hurricanes. Plylox Hurricane Clips are also easy to install, making them a great option for homeowners and contractors alike.

What are the benefits of using Plylox Hurricane Clips?

There are many benefits to using Plylox Hurricane Clips, including:

• Increased strength and durability: Plylox Hurricane Clips are made from high-strength steel and are designed to withstand the high winds and debris that can be generated by hurricanes.
• Easy to install: Plylox Hurricane Clips are easy to install, making them a great option for homeowners and contractors alike.
• Cost-effective: Plylox Hurricane Clips are a cost-effective way to protect your home from hurricanes.

Where can I buy Plylox Hurricane Clips?

Plylox Hurricane Clips are available for purchase online and at select retailers. For more information, please visit our website or contact us at [email protected]

Installing Plylox hurricane clips is a relatively simple process that can be completed in a few hours. However, it is important to follow the instructions carefully to ensure that the clips are installed correctly. By following the steps outlined in this guide, you can protect your home from hurricane damage and keep your family safe.

Here are the key takeaways from this guide:

• Plylox hurricane clips are a type of metal bracket that is used to attach plywood sheathing to a home’s exterior walls.
• The clips are installed at each corner of the plywood sheet and every 16 inches along the edges.
• The clips help to strengthen the plywood sheathing and keep it in place during high winds.
• Installing Plylox hurricane clips is a relatively simple process that can be completed in a few hours.
• By following the instructions carefully, you can protect your home from hurricane damage and keep your family safe.