How To Reset Oil Life On 2013 Ram 1500?

How to Reset Oil Life on a 2013 Ram 1500

Your Ram 1500’s oil life monitor is a helpful tool that lets you know when it’s time for an oil change. But what if you want to reset the oil life monitor for some reason, such as after an oil change or if you’ve added oil?

Resetting the oil life monitor on a 2013 Ram 1500 is a simple process that can be completed in just a few minutes. Here’s how:

1. Turn the ignition to the ON position, but do not start the engine.
2. Press and hold the trip odometer reset button (located on the left side of the steering wheel) for 5 seconds.
3. The oil life indicator will flash and then reset to 100%.

That’s it! You’ve now successfully reset the oil life monitor on your 2013 Ram 1500.

Here are some additional tips for maintaining your Ram 1500:

• Change your oil and oil filter regularly. The recommended oil change interval for your Ram 1500 is every 7,500 miles or 6 months, whichever comes first.
• Use the right type of oil for your Ram 1500. The owner’s manual will specify the type of oil that your truck requires.
• Keep an eye on your oil level. Check the oil level regularly and add oil as needed.
• Inspect your oil filter for leaks. Check the oil filter regularly for leaks and replace it if necessary.

By following these tips, you can help keep your Ram 1500 running smoothly for many years to come.

Step	Instructions	Image
1	Turn the ignition to the “On” position without starting the engine.
2	Press and hold the “Oil Life” button until the “Oil Life” reset message appears on the instrument cluster.
3	Release the “Oil Life” button.

Step 1: Locate the Oil Life Reset Button

The oil life reset button is located on the driver’s side of the instrument panel, just below the steering wheel. It is a small, black button with a red “reset” symbol on it.

Step 2: Press and Hold the Oil Life Reset Button

To reset the oil life, follow these steps:

1. Turn the ignition to the “on” position.
2. Press and hold the oil life reset button for about 5 seconds.
3. The oil life indicator will reset to “100%.”

Important Notes:

• The oil life reset button can only be used when the engine is off.
• If the oil life indicator is not resetting, try turning the ignition off and then back on.
• If the oil life indicator is still not resetting, you may need to take your vehicle to a dealer for service.

:

Resetting the oil life on your 2013 Ram 1500 is a simple task that can be completed in a few seconds. By following the steps above, you can ensure that your vehicle’s oil life indicator is accurate and that you are properly maintaining your engine.

Here are some additional tips for maintaining your 2013 Ram 1500:

• Change the oil and filter according to the manufacturer’s recommended schedule.
• Use the correct type of oil for your vehicle.
• Check the oil level regularly and add oil as needed.
• Inspect the oil pan gasket for leaks regularly.
• Have your vehicle serviced regularly by a qualified technician.

By following these tips, you can help keep your 2013 Ram 1500 running smoothly and efficiently for many years to come.

Step 3: Turn the Ignition On and Off

Once you have located the oil life reset button, turn the ignition on and off three times. Each time you turn the ignition on, the oil life percentage will decrease by one. After the third time, the oil life percentage will be reset to 100%.

Step 4: Verify That the Oil Life Reset Was Successful

To verify that the oil life reset was successful, turn the ignition on and off one more time. The oil life percentage should now be displayed as 100%.

Resetting the oil life on your 2013 Ram 1500 is a simple process that can be completed in just a few minutes. By following these steps, you can ensure that your vehicle is properly maintained and that you are getting the most out of your oil change.

Here are some additional tips for maintaining your 2013 Ram 1500:

• Change your oil and filter regularly. The oil in your engine lubricates the moving parts and helps to keep them cool. Changing your oil and filter regularly will help to keep your engine running smoothly and prevent damage.
• Check your fluids regularly. Make sure to check your oil level, coolant level, and brake fluid level regularly. Low fluid levels can cause your engine to overheat or your brakes to fail.
• Inspect your tires regularly. Make sure to inspect your tires for signs of wear and tear, such as cracks, bulges, or uneven wear. Worn tires can be dangerous and can lead to accidents.
• Get your vehicle serviced regularly. Taking your vehicle in for regular maintenance will help to catch any problems early on and prevent them from becoming serious.

By following these tips, you can help to keep your 2013 Ram 1500 in good condition and extend its lifespan.

How do I reset the oil life on my 2013 Ram 1500?

1. Turn the ignition to the ON position. Do not start the engine.
2. Press and hold the trip odometer reset button.
3. While holding the button down, turn the ignition to the OFF position.
4. Release the button.
5. The oil life indicator will be reset.

What does the oil life indicator on my 2013 Ram 1500 mean?

The oil life indicator is a gauge that shows how much life is left in your oil. The indicator is based on a number of factors, including the type of oil you use, your driving habits, and the climate you live in. When the oil life indicator reaches 0%, it’s time for an oil change.

How often should I change the oil in my 2013 Ram 1500?

The recommended oil change interval for your 2013 Ram 1500 is every 7,500 miles or 6 months, whichever comes first. However, you may need to change the oil more frequently if you drive in dusty or dirty conditions, or if you tow a heavy load.

What type of oil should I use in my 2013 Ram 1500?

The recommended oil for your 2013 Ram 1500 is 5W-30. You can also use 10W-30 or 10W-40 oil, but 5W-30 is the best option for most driving conditions.

Where can I find the oil filler cap on my 2013 Ram 1500?

The oil filler cap is located on the top of the engine, near the front of the vehicle. It is a black cap with a red ring around it.

How much oil do I need to add to my 2013 Ram 1500?

You will need to add about 5 quarts of oil to your 2013 Ram 1500. However, it is always best to check the owner’s manual for the exact amount of oil your vehicle requires.

What tools do I need to change the oil in my 2013 Ram 1500?

You will need the following tools to change the oil in your 2013 Ram 1500:

• Oil drain pan
• Funnel
• Wrench
• Rags
• New oil filter
• New oil

How do I change the oil in my 2013 Ram 1500?

1. Park your vehicle on a level surface. Turn off the engine and allow it to cool down.
2. Locate the oil drain plug on the bottom of the oil pan. It is a 17mm bolt.
3. Place the oil drain pan under the oil drain plug.
4. Use the wrench to loosen the oil drain plug. Allow all of the oil to drain out of the oil pan.
5. Replace the oil drain plug and tighten it securely.
6. Locate the oil filter on the top of the engine. It is a black cylindrical object with a red cap.
7. Use the wrench to loosen the oil filter. Be careful not to spill any oil.
8. Apply a thin coat of new oil to the gasket of the new oil filter.
9. Screw the new oil filter onto the oil filter housing. Tighten it until it is snug.
10. Add new oil to the engine. The oil capacity for your 2013 Ram 1500 is 5 quarts.
11. Start the engine and let it run for a few minutes.
12. Check the oil level on the dipstick. The oil level should be between the “full” and “add” marks.
13. Turn off the engine and wait for it to cool down.
14. Reinstall the oil filler cap.

In this blog post, we have discussed how to reset the oil life on a 2013 Ram 1500. We have provided step-by-step instructions on how to do this, as well as some tips and tricks to help you along the way. We hope that this information has been helpful, and that you are now able to reset the oil life on your Ram 1500 with ease.

Here are some key takeaways from this blog post:

• The oil life reset button is located on the instrument cluster.
• To reset the oil life, you will need to turn the ignition to the on position without starting the engine.
• Press and hold the oil life reset button for 5 seconds.
• The oil life indicator will flash and then reset to 100%.
• You should reset the oil life every time you change your oil.

By following these simple steps, you can easily reset the oil life on your 2013 Ram 1500. This will help you to keep track of your oil changes and ensure that your vehicle is properly maintained.