How To Reset Hayward Pro Logic Salt Cell?

How to Reset Your Hayward Pro Logic Salt Cell

Your Hayward Pro Logic salt cell is an essential part of your pool’s water filtration system. It helps to keep the water clean and clear by generating chlorine, which kills bacteria and other harmful organisms. However, if your salt cell stops working properly, you may need to reset it.

Resetting your Hayward Pro Logic salt cell is a simple process that can be completed in just a few minutes. In this article, we will walk you through the steps involved in resetting your salt cell, so you can get your pool back up and running in no time.

We’ll also provide some tips on how to maintain your salt cell so that it stays in good working order and keeps your pool clean and healthy.

Step	Action	Explanation
1	Turn off the power to the salt cell	This will prevent the cell from being damaged while you are resetting it.
2	Locate the reset button on the salt cell	The reset button is usually a small, black button located on the side of the cell.
3	Press and hold the reset button for 5 seconds	This will reset the cell and clear any errors that may be present.
4	Turn the power back on to the salt cell	The cell will now be reset and ready to use.

How To Reset Hayward Pro Logic Salt Cell?

Step 1: Turn off the power to the salt cell.

The first step to resetting a Hayward Pro Logic salt cell is to turn off the power to the cell. This can be done by turning off the breaker that supplies power to the cell, or by unplugging the cell from the power outlet.

Step 2: Locate the reset button on the salt cell.

The reset button on a Hayward Pro Logic salt cell is located on the side of the cell. It is a small, round button that is usually black or gray in color.

To reset the salt cell, follow these steps:

1. Turn off the power to the salt cell.
2. Locate the reset button on the salt cell.
3. Press and hold the reset button for 5 seconds.
4. Release the reset button.
5. Turn on the power to the salt cell.

The salt cell will now be reset. You may need to wait a few minutes for the salt cell to start producing chlorine.

Troubleshooting

If the salt cell does not reset after following these steps, there may be a problem with the salt cell. You may need to contact Hayward customer service for assistance.

Resetting a Hayward Pro Logic salt cell is a simple process that can be completed in a few minutes. By following these steps, you can ensure that your salt cell is properly functioning and producing chlorine.

Here are some additional tips for maintaining your Hayward Pro Logic salt cell:

• Keep the salt level in the pool at the recommended level. The salt level should be between 2,500 and 3,500 ppm.
• Clean the salt cell regularly. The salt cell should be cleaned every 3 to 6 months.
• Replace the salt cell when it is worn out. The salt cell should be replaced every 3 to 5 years.

By following these tips, you can extend the life of your Hayward Pro Logic salt cell and keep your pool clean and healthy.

How To Reset Hayward Pro Logic Salt Cell?

The Hayward Pro Logic salt cell is a popular choice for pool owners looking for a reliable and easy-to-use salt water chlorinator. However, like any electronic device, the salt cell can sometimes malfunction. If this happens, you may need to reset the salt cell in order to restore it to normal operation.

Resetting the Hayward Pro Logic salt cell is a simple process that can be completed in just a few minutes. To reset the salt cell, follow these steps:

1.Turn off the power to the salt cell. This can be done by flipping the breaker switch to the off position.
2.Locate the reset button on the salt cell. The reset button is a small, recessed button located on the front of the salt cell.
3.Press and hold the reset button for 5 seconds.
4.Turn the power back on to the salt cell.

The salt cell should now be reset. If the salt cell does not reset, you may need to contact Hayward customer support for assistance.

What Causes the Hayward Pro Logic Salt Cell to Malfunction?

There are a few different things that can cause the Hayward Pro Logic salt cell to malfunction. Some of the most common causes include:

• Low salt levels. The salt cell requires a certain amount of salt in the pool water in order to function properly. If the salt levels drop too low, the salt cell will not be able to produce chlorine and the pool water will become cloudy and green.
• High salt levels. High salt levels can also damage the salt cell. If the salt levels are too high, the salt cell will work overtime to produce chlorine and eventually it will overheat and malfunction.
• Improper water chemistry. The salt cell is also affected by the water chemistry in the pool. If the pH level or alkalinity level is too high, it can damage the salt cell.
• Damaged salt cell. The salt cell is a delicate piece of equipment and it can be damaged if it is dropped or if it is exposed to harsh chemicals. If the salt cell is damaged, it will need to be replaced.

How to Prevent the Hayward Pro Logic Salt Cell from Malfunctioning

There are a few things you can do to help prevent the Hayward Pro Logic salt cell from malfunctioning. Some of the most important things to do include:

• Maintain proper salt levels. The salt cell requires a certain amount of salt in the pool water in order to function properly. Keep the salt levels between 2,500 and 3,500 ppm.
• Test the water chemistry regularly. The salt cell is also affected by the water chemistry in the pool. Test the pH level and alkalinity level regularly and make adjustments as needed.
• Be careful not to drop or damage the salt cell. The salt cell is a delicate piece of equipment and it can be damaged if it is dropped or if it is exposed to harsh chemicals.

By following these tips, you can help prevent the Hayward Pro Logic salt cell from malfunctioning.

The Hayward Pro Logic salt cell is a reliable and easy-to-use salt water chlorinator. However, like any electronic device, the salt cell can sometimes malfunction. If this happens, you can easily reset the salt cell by following the steps outlined in this article.

By following these tips, you can help prevent the Hayward Pro Logic salt cell from malfunctioning and keep your pool water clean and healthy.

How do I reset my Hayward Pro Logic salt cell?

1. Turn off the power to the salt cell. This can be done by either turning off the breaker that supplies power to the salt cell, or by unplugging the salt cell from the power outlet.
2. Locate the reset button on the salt cell. The reset button is usually a small, black button located on the side of the salt cell.
3. Press and hold the reset button for 5 seconds. The salt cell will beep once and the lights will flash to indicate that it has been reset.
4. Turn the power back on to the salt cell. The salt cell will begin to operate normally.

What happens if I don’t reset my Hayward Pro Logic salt cell?

If you do not reset your Hayward Pro Logic salt cell, the salt cell may not operate properly. This could result in the salt cell not producing enough chlorine to keep your pool clean and safe.

How often should I reset my Hayward Pro Logic salt cell?

You should reset your Hayward Pro Logic salt cell every time you add salt to the pool. This will help to ensure that the salt cell is operating properly and that it is producing enough chlorine to keep your pool clean and safe.

What if I can’t find the reset button on my Hayward Pro Logic salt cell?

If you cannot find the reset button on your Hayward Pro Logic salt cell, you can contact Hayward customer support for assistance.

What other problems can cause my Hayward Pro Logic salt cell to not work properly?

There are a number of other problems that can cause your Hayward Pro Logic salt cell to not work properly. These include:

• Low salt levels: If the salt level in your pool is too low, the salt cell will not be able to produce enough chlorine to keep your pool clean and safe.
• High salt levels: If the salt level in your pool is too high, the salt cell can become damaged.
• Dirty salt cell: If the salt cell becomes dirty, it will not be able to produce enough chlorine to keep your pool clean and safe.
• Faulty salt cell: If the salt cell is faulty, it will not be able to produce enough chlorine to keep your pool clean and safe.

If you suspect that your Hayward Pro Logic salt cell is not working properly, you should contact Hayward customer support for assistance.

: In this blog post, we have discussed how to reset a Hayward Pro Logic salt cell. We have covered the steps involved in the process, as well as some of the common problems that you may encounter. We hope that this information has been helpful, and that you are now able to reset your salt cell without any difficulty.

Here are some key takeaways from this blog post:

• To reset your Hayward Pro Logic salt cell, you will need to turn off the power to the pool pump and locate the salt cell.
• Once you have located the salt cell, you will need to remove the cover and find the reset button.
• Press the reset button for 5 seconds, then replace the cover.
• Turn the power back on to the pool pump and your salt cell should be reset.

If you are still having trouble resetting your salt cell, you can contact Hayward customer support for assistance.