How To Reset Bushnell Tour V4?

How to Reset Bushnell Tour V4

The Bushnell Tour V4 is a popular golf rangefinder that is known for its accuracy and ease of use. However, like all electronic devices, the Tour V4 can occasionally malfunction or become inaccurate. If this happens, you may need to reset the rangefinder.

Resetting the Tour V4 is a simple process that can be completed in just a few steps. In this article, we will walk you through the process of resetting your Tour V4 so that you can get back to playing golf in no time.

Step 1: Turn off the rangefinder.

The first step is to turn off the rangefinder. To do this, press and hold the power button for two seconds. The rangefinder will beep and the display will turn off.

Step 2: Remove the battery cover.

The next step is to remove the battery cover. The battery cover is located on the back of the rangefinder. To remove it, use your fingernail or a coin to pry it open.

Step 3: Remove the battery.

Once the battery cover is open, you can remove the battery. The battery is a small, round, flat battery located in the center of the rangefinder. To remove it, gently lift it up and out of the battery compartment.

Step 4: Insert the battery.

Now that the battery is removed, you can insert a new battery. Make sure that the positive side of the battery is facing up.

Step 5: Replace the battery cover.

Once the battery is inserted, you can replace the battery cover. Press down on the battery cover until it snaps into place.

Step 6: Turn on the rangefinder.

The final step is to turn on the rangefinder. To do this, press and hold the power button for two seconds. The rangefinder will beep and the display will turn on.

Now that you have reset your Tour V4, you can enjoy all of the features that it has to offer. Happy golfing!

Step	Instructions	Image
1	Turn off the Bushnell Tour V4.
2	Press and hold the power button for 10 seconds.
3	The Bushnell Tour V4 will beep and the display will flash.
4	The Bushnell Tour V4 is now reset.

What is the Bushnell Tour V4?

The Bushnell Tour V4 is a laser rangefinder that is designed for golfers of all skill levels. It features a variety of advanced features that make it easy to measure distances to the pin, bunkers, and other objects on the course. The Tour V4 also has a slope compensation feature that allows you to adjust for the effects of uphill and downhill shots.

The Tour V4 is a compact and lightweight rangefinder that is easy to carry around the course. It has a large, easy-to-read display that shows distances in yards and meters. The Tour V4 also has a built-in inclinometer that helps you to make accurate slope compensations.

The Bushnell Tour V4 is a great choice for golfers who are looking for a high-quality laser rangefinder that is easy to use. It is accurate, reliable, and packed with features that will help you improve your game.

How to reset the Bushnell Tour V4?

To reset the Bushnell Tour V4, follow these steps:

1. Turn off the rangefinder.
2. Press and hold the power button for three seconds.
3. The rangefinder will beep and the display will show “RST.”
4. Release the power button.
5. The rangefinder will be reset to its factory settings.

Note: Resetting the Bushnell Tour V4 will erase all of your saved distances.

The Bushnell Tour V4 is a great laser rangefinder for golfers of all skill levels. It is accurate, reliable, and packed with features that will help you improve your game. If you are looking for a high-quality laser rangefinder, the Bushnell Tour V4 is a great option.

How to Reset Bushnell Tour V4?

The Bushnell Tour V4 is a popular golf rangefinder that offers a variety of features to help you improve your game. However, like any electronic device, it can sometimes malfunction. If you’re experiencing problems with your Tour V4, resetting it may be the solution.

Resetting your Tour V4 is a simple process that can be completed in just a few steps. Here’s how to do it:

1. Turn off the Tour V4.
2. Press and hold the power button for about 10 seconds.
3. The Tour V4 will beep twice and the display will show “RST.”
4. Release the power button.
5. The Tour V4 will be reset to its factory settings.

Once you’ve reset your Tour V4, you may need to re-enter your settings. This includes things like the distance units, slope mode, and flag lock.

To re-enter your settings, follow these steps:

1. Turn on the Tour V4.
2. Press the menu button.
3. Use the up and down arrows to select the setting you want to change.
4. Press the enter button to confirm your selection.
5. Repeat steps 3 and 4 for each setting you want to change.

Once you’ve re-entered your settings, you can start using your Tour V4 again.

What happens when you reset the Bushnell Tour V4?

When you reset your Bushnell Tour V4, the following things will happen:

• All of your settings will be reset to their factory defaults.
• The slope mode will be turned off.
• The flag lock will be turned off.
• The distance units will be set to yards.

Resetting your Tour V4 is a good way to fix any problems you’re experiencing with the device. It can also be helpful if you want to sell your Tour V4 and want to make sure that all of your personal information is removed from the device.

Troubleshooting tips for the Bushnell Tour V4

If you’re having problems with your Bushnell Tour V4, there are a few things you can try to troubleshoot the issue. Here are some tips:

• Check the batteries. Make sure that the batteries in your Tour V4 are fresh and properly installed.
• Try turning the Tour V4 off and on again. This can sometimes fix minor problems.
• Reset the Tour V4. To do this, press and hold the power button for about 10 seconds. The Tour V4 will beep twice and the display will show “RST.”
• Update the Tour V4’s firmware. To do this, visit the Bushnell website and download the latest firmware update.
• Contact Bushnell customer support. If you’re still having problems, you can contact Bushnell customer support for help.

Here are some additional tips for using your Bushnell Tour V4:

• Hold the Tour V4 steady when taking a measurement. Movement can cause the Tour V4 to give inaccurate measurements.
• Point the Tour V4 at the flagstick, not the ball. The Tour V4 will give you a more accurate measurement if you point it at the flagstick.
• Use the slope mode only if you’re allowed to do so. The slope mode can give you an inaccurate measurement if you’re not allowed to use it.

By following these tips, you can help to ensure that your Bushnell Tour V4 is working properly and that you’re getting the most accurate measurements possible.

The Bushnell Tour V4 is a great golf rangefinder that can help you improve your game. However, like any electronic device, it can sometimes malfunction. If you’re experiencing problems with your Tour V4, resetting it may be the solution.

Resetting your Tour V4 is a simple process that can be completed in just a few steps. By following the steps in this guide, you can quickly and easily reset your Tour V4 and get back to playing golf.

How do I reset my Bushnell Tour V4?

1. Turn off the rangefinder.
2. Press and hold the power button for 10 seconds.
3. The rangefinder will beep and the display will show “RST”.
4. Release the power button.
5. The rangefinder will be reset to its factory defaults.

What happens when I reset my Bushnell Tour V4?

When you reset your Bushnell Tour V4, the following things will happen:

• All of your saved measurements will be deleted.
• The rangefinder will be set to its factory defaults.
• The rangefinder will be calibrated to the current temperature.

Why do I need to reset my Bushnell Tour V4?

There are a few reasons why you might need to reset your Bushnell Tour V4:

• If you have accidentally changed a setting and don’t know how to change it back.
• If you want to delete all of your saved measurements.
• If you want to calibrate the rangefinder to the current temperature.

How do I calibrate my Bushnell Tour V4?

To calibrate your Bushnell Tour V4, follow these steps:

1. Turn on the rangefinder.
2. Press and hold the Mode button for 3 seconds.
3. The rangefinder will beep and the display will show “CAL”.
4. Point the rangefinder at a target that is 100 yards away.
5. Press the Mode button.
6. The rangefinder will beep and the display will show “CAL OK”.

What if my Bushnell Tour V4 is not resetting?

If your Bushnell Tour V4 is not resetting, there are a few things you can check:

• Make sure that you are holding the power button for 10 seconds.
• Make sure that you are pressing the power button in the correct location.
• Try resetting the rangefinder again.
• If the rangefinder is still not resetting, contact Bushnell customer support for assistance.

  resetting your Bushnell Tour V4 is a simple process that can be completed in just a few steps. By following the steps outlined in this guide, you can ensure that your rangefinder is functioning properly and that you are getting the most accurate readings possible.

Here are the key takeaways:

• To reset your Bushnell Tour V4, hold down the power button for 10 seconds.
• The rangefinder will beep and the display will show “RST.”
• Release the power button and the rangefinder will be reset.
• Your rangefinder is now ready to use.

By following these simple steps, you can ensure that your Bushnell Tour V4 is functioning properly and that you are getting the most accurate readings possible.