How To Refill Purell Automatic Dispenser?

How to Refill a Purell Automatic Dispenser

Do you have a Purell automatic dispenser in your home or office? If so, you know how convenient it is to be able to quickly and easily sanitize your hands without having to touch a dirty pump. But what happens when the dispenser runs out of sanitizer? Don’t worry, refilling it is easy!

In this article, we will walk you through the steps of refilling a Purell automatic dispenser. We’ll also provide some tips on how to keep your dispenser clean and germ-free. So whether you’re a first-time user or you’re just looking for a refresher, read on for all the information you need to know!

Step	Instructions	Image
1	Remove the dispenser lid.
2	Insert a new bottle of Purell into the dispenser.
3	Replace the dispenser lid.

How to Refill a Purell Automatic Dispenser

Gather Supplies

To refill a Purell automatic dispenser, you will need the following supplies:

• Purell refill bottle
• Paper towel
• Disposable gloves (optional)

Turn Off Dispenser

Before you can refill the dispenser, you will need to turn it off. To do this, locate the power switch on the back of the dispenser. The switch is usually a small, black button. Slide the switch to the “Off” position.

Remove Dispenser Cover

Once the dispenser is turned off, you can remove the cover. To do this, grasp the two tabs on the sides of the cover and pull up. The cover should come off easily.

Insert Refill Bottle

With the cover removed, you can now insert the refill bottle. The refill bottle will fit into the dispenser in the same way that the original bottle did. Once the bottle is inserted, push down on the top of the bottle until it is secure.

Turn On Dispenser

Now that the refill bottle is inserted, you can turn the dispenser back on. To do this, slide the power switch to the “On” position. The dispenser should now be working properly.

Clean Dispenser

It is important to clean the dispenser regularly to prevent the spread of germs. To clean the dispenser, follow these steps:

1. Remove the refill bottle from the dispenser.
2. Wipe down the inside of the dispenser with a paper towel dampened with rubbing alcohol.
3. Wipe down the outside of the dispenser with a clean, dry paper towel.
4. Replace the refill bottle and turn on the dispenser.

By following these steps, you can keep your Purell automatic dispenser clean and working properly.

Refilling a Purell automatic dispenser is a simple process that can be completed in a few minutes. By following these steps, you can keep your dispenser clean and well-stocked with hand sanitizer.

How To Refill Purell Automatic Dispenser?

Purell automatic dispensers are a convenient way to keep your hands clean, but they can be difficult to refill. If you’re not sure how to do it, don’t worry we’re here to help.

In this guide, we’ll walk you through the steps of refilling a Purell automatic dispenser, step-by-step. We’ll also provide some tips and tricks to help you get the job done quickly and easily.

So, whether you’re a first-time user or you’re just looking for a refresher, read on for all the information you need to know about refilling a Purell automatic dispenser.

Step 1: Gather Your Supplies

Before you can refill your Purell automatic dispenser, you’ll need to gather a few supplies. These include:

• A Purell refill bottle
• A paper towel
• A pair of scissors

Once you have your supplies, you can begin the refilling process.

Step 2: Remove the Dispenser Cover

The first step is to remove the dispenser cover. To do this, locate the release button on the front of the dispenser. This button is usually a small, round button located near the bottom of the dispenser.

Press down on the release button and lift up on the cover to remove it.

Step 3: Insert the Refill Bottle

Once the dispenser cover is removed, you can insert the refill bottle. To do this, place the refill bottle on the dispenser base.

Align the spout on the refill bottle with the fill port on the dispenser.

Press down on the refill bottle until it is fully inserted.

Step 4: Replace the Dispenser Cover

Now that the refill bottle is inserted, you can replace the dispenser cover. To do this, simply place the cover over the dispenser base and press down until it snaps into place.

Step 5: Test the Dispenser

Now that the dispenser is refilled, you can test it to make sure it is working properly. To do this, simply press the dispenser button and verify that hand sanitizer is dispensed.

If the dispenser is not working properly, you may need to repeat the refilling process.

Tips and Tricks for Refilling a Purell Automatic Dispenser

Here are a few tips and tricks to help you refill a Purell automatic dispenser quickly and easily:

• Use a paper towel to clean the dispenser before you begin the refilling process. This will help to prevent any contaminants from entering the dispenser.
• Make sure that the refill bottle is properly aligned with the fill port on the dispenser. This will help to ensure that the dispenser is properly refilled.
• Press down on the refill bottle firmly until it is fully inserted. This will help to create a tight seal between the refill bottle and the dispenser.
• Replace the dispenser cover as soon as possible after refilling the dispenser. This will help to prevent the dispenser from becoming contaminated.

By following these tips and tricks, you can easily refill your Purell automatic dispenser and keep your hands clean and healthy.

Refilling a Purell automatic dispenser is a simple task that can be completed in a few minutes. By following the steps in this guide, you can easily keep your dispenser stocked with hand sanitizer and ensure that your hands are clean and healthy.

How do I refill a Purell automatic dispenser?

1. Turn off the dispenser. There should be a power button on the bottom or back of the dispenser. Press and hold the button until the power light turns off.
2. Remove the refill bottle. There should be a release button on the side of the dispenser. Press the button and the refill bottle will pop out.
3. Fill the refill bottle with Purell hand sanitizer. Make sure to fill the bottle to the fill line.
4. Replace the refill bottle. Insert the refill bottle into the dispenser until it clicks into place.
5. Turn on the dispenser. Press the power button to turn the dispenser on. The power light will turn on.

What type of Purell refill bottle do I need?

You need a Purell refill bottle that is compatible with your dispenser. The refill bottle should have the same type of connector as your dispenser.

How often do I need to refill the dispenser?

You should refill the dispenser when the hand sanitizer level is low. The refill bottle should have a fill line that indicates when the dispenser needs to be refilled.

Can I use any type of hand sanitizer in the dispenser?

No, you should only use Purell hand sanitizer in the dispenser. Other types of hand sanitizer may not be compatible with the dispenser and may damage it.

How do I clean the dispenser?

To clean the dispenser, you can use a damp cloth and a mild detergent. Be sure to wipe down the dispenser thoroughly, including the dispenser head and the refill bottle port.

What if the dispenser is not working?

If the dispenser is not working, there may be a few things you can check. First, make sure that the dispenser is turned on. Second, check the refill bottle to make sure that it is properly inserted into the dispenser. Third, try cleaning the dispenser to remove any debris that may be blocking the dispenser head. If the dispenser is still not working, you may need to contact the manufacturer for assistance.

In this blog post, we have discussed how to refill a Purell automatic dispenser. We have covered the steps involved in the process, as well as some tips and tricks to make it easier. We hope that this information has been helpful and that you are now able to refill your Purell dispenser with ease.

Here are some key takeaways from the blog post:

• To refill a Purell automatic dispenser, you will need to remove the bottom cap, insert a new bottle of Purell, and replace the cap.
• Make sure that the bottle of Purell is inserted correctly, with the nozzle facing up.
• If the dispenser is not dispensing Purell properly, you may need to clean the nozzle.
• You can also refill a Purell automatic dispenser with a refill bottle.

We hope that this blog post has been helpful and that you are now able to refill your Purell dispenser with ease.