How To Program Hayward Pool Pump?

ByCarla Denker Blog

How to Program a Hayward Pool Pump

Your Hayward pool pump is an essential part of your pool maintenance routine. It circulates the water, filters out impurities, and keeps your pool clean and safe. But did you know that you can program your Hayward pool pump to work more efficiently?

By programming your pump, you can save energy, extend the life of your pump, and improve the overall performance of your pool. In this article, we will show you how to program a Hayward pool pump in just a few simple steps.

We’ll cover everything you need to know, from choosing the right settings for your pool to troubleshooting any problems that may arise. So if you’re ready to learn how to program your Hayward pool pump, read on!

Step Instructions Image
1 Turn off the pump and disconnect the power cord.
2 Locate the programming button on the pump.
3 Press and hold the programming button for 5 seconds.
4 Use the arrow buttons to scroll through the programming options.
5 Press the enter button to select an option.
6 Repeat steps 4 and 5 to program all of the desired options.
7 Press and hold the programming button for 5 seconds to save your settings.

A Hayward pool pump is a vital part of any swimming pool. It circulates the water, removes impurities, and keeps the pool clean and safe. The pump is also responsible for heating the pool water, if desired.

Programming the Hayward pool pump is relatively simple. However, it is important to understand the different settings and how they affect the operation of the pump. This guide will walk you through the process of programming your Hayward pool pump.

Parts of a Hayward Pool Pump

The Hayward pool pump is made up of several different parts. These parts work together to circulate the water, remove impurities, and heat the pool water.

  • The motor: The motor is the heart of the pump. It provides the power to circulate the water.
  • The impeller: The impeller is a spinning wheel that draws water into the pump and pushes it out the other side.
  • The strainer basket: The strainer basket catches large debris, such as leaves and twigs, before they can damage the pump.
  • The filter: The filter removes small particles from the water, such as dirt and pollen.
  • The heater: The heater warms the pool water to the desired temperature.

Programming the Hayward Pool Pump

Programming the Hayward pool pump is relatively simple. However, it is important to understand the different settings and how they affect the operation of the pump.

To program the pump, follow these steps:

1. Turn on the pump.
2. Press the Menu button.
3. Use the arrow buttons to select the desired setting.
4. Press the Enter button to save the setting.

The following table lists the different settings and their functions:

| Setting | Function |
|—|—|
| Pump Speed | The speed of the pump, which affects the flow rate of the water. |
| Filter Cycle | The length of time the filter runs for each day. |
| Filter Rinse | The length of time the filter rinses for each day. |
| Heater Setpoint | The desired temperature of the pool water. |
| Heater Run Time | The length of time the heater runs for each day. |

Programming the Hayward pool pump is a relatively simple task. By following the steps in this guide, you can easily program your pump to meet your specific needs.

Here are some additional tips for maintaining your Hayward pool pump:

  • Clean the strainer basket regularly to prevent debris from clogging the pump.
  • Change the filter according to the manufacturer’s instructions.
  • Inspect the pump for leaks regularly and repair any leaks as soon as possible.
  • Have the pump serviced by a qualified technician once a year.

By following these tips, you can help to extend the life of your Hayward pool pump and keep your pool water clean and safe.

How To Program Hayward Pool Pump?

Hayward pool pumps are some of the most popular pool pumps on the market. They are known for their durability and efficiency. However, in order to get the most out of your Hayward pool pump, you need to know how to program it correctly.

Programming a Hayward pool pump is not difficult, but it does require some basic knowledge of how the pump works. In this guide, we will walk you through the process of programming your Hayward pool pump step-by-step.

Step 1: Gather Your Materials

Before you can begin programming your Hayward pool pump, you will need to gather the following materials:

  • A Phillips head screwdriver
  • A paper towel
  • A pen or pencil
  • The manual for your Hayward pool pump

Step 2: Locate the Programming Panel

The programming panel on your Hayward pool pump is located on the top of the pump. It is a small, rectangular panel with a series of buttons and lights.

Step 3: Turn Off the Power to the Pump

Before you can begin programming your Hayward pool pump, you must turn off the power to the pump. This is important for safety reasons.

To turn off the power to the pump, simply flip the breaker switch to the “Off” position.

Step 4: Press the “Program” Button

Once the power to the pump is off, you can begin programming it. To do this, press the “Program” button on the programming panel.

The “Program” button is usually located in the center of the programming panel. It is a small, round button with a “P” on it.

Step 5: Enter the Programming Code

After you press the “Program” button, you will need to enter the programming code. The programming code is a four-digit number that is unique to your Hayward pool pump.

The programming code is usually found on a sticker on the side of the pump. If you cannot find the programming code, you can contact Hayward customer support for assistance.

To enter the programming code, simply press the number buttons on the programming panel. The number buttons are located to the right of the “Program” button.

Once you have entered the programming code, the pump will beep and the programming mode will be activated.

Step 6: Set the Clock

The first thing you need to do in programming mode is set the clock. This is important because the pump will use the clock to schedule its cycles.

To set the clock, press the “Clock” button on the programming panel. The “Clock” button is usually located to the left of the “Program” button.

Once you press the “Clock” button, the pump will display the current time. To change the time, simply press the number buttons on the programming panel.

Once you have set the clock, press the “Enter” button on the programming panel. The pump will beep and the clock will be set.

Step 7: Set the Run Time

The next thing you need to do is set the run time for the pump. The run time is the amount of time the pump will run for each cycle.

To set the run time, press the “Run Time” button on the programming panel. The “Run Time” button is usually located to the right of the “Clock” button.

Once you press the “Run Time” button, the pump will display the current run time. To change the run time, simply press the number buttons on the programming panel.

Once you have set the run time, press the “Enter” button on the programming panel. The pump will beep and the run time will be set.

Step 8: Set the Cycle Frequency

The final thing you need to do is set the cycle frequency for the pump. The cycle frequency is the number of times the pump will run per day.

To set the cycle frequency, press the “Cycle Frequency” button on the programming panel. The “Cycle Frequency” button is usually located to the left of the “Run Time” button.

Once you press the “Cycle Frequency” button, the pump will display the current cycle frequency. To change the cycle frequency, simply press the number buttons on the programming panel.

Once you have set the cycle frequency, press the “Enter” button on the programming panel. The pump will beep and the cycle frequency will be set.

Step 9: Turn On the Power to the

In this blog post, we have discussed how to program a Hayward pool pump. We have covered the steps involved in programming the pump, as well as some of the common problems that you may encounter. We hope that this information has been helpful, and that you are now able to program your Hayward pool pump with ease.

Here are some key takeaways from this blog post:

  • To program a Hayward pool pump, you will need to access the pump’s control panel.
  • The control panel is usually located on the side of the pump.
  • To program the pump, you will need to enter the pump’s serial number and the desired settings.
  • The settings that you can program include the pump’s speed, run time, and start time.
  • If you have any problems programming the pump, you can consult the pump’s owner’s manual or contact Hayward customer support.

Author Profile

Carla Denker
Carla Denker
Carla Denker first opened Plastica Store in June of 1996 in Silverlake, Los Angeles and closed in West Hollywood on December 1, 2017. PLASTICA was a boutique filled with unique items from around the world as well as products by local designers, all hand picked by Carla. Although some of the merchandise was literally plastic, we featured items made out of any number of different materials.

Prior to the engaging profile in west3rdstreet.com, the innovative trajectory of Carla Denker and PlasticaStore.com had already captured the attention of prominent publications, each one spotlighting the unique allure and creative vision of the boutique. The acclaim goes back to features in Daily Candy in 2013, TimeOut Los Angeles in 2012, and stretched globally with Allure Korea in 2011. Esteemed columns in LA Times in 2010 and thoughtful pieces in Sunset Magazine in 2009 highlighted the boutique’s distinctive character, while Domino Magazine in 2008 celebrated its design-forward ethos. This press recognition dates back to the earliest days of Plastica, with citations going back as far as 1997, each telling a part of the Plastica story.

After an illustrious run, Plastica transitioned from the tangible to the intangible. While our physical presence concluded in December 2017, our essence endures. Plastica Store has been reborn as a digital haven, continuing to serve a community of discerning thinkers and seekers. Our new mission transcends physical boundaries to embrace a world that is increasingly seeking knowledge and depth.

Similar Posts