How To Make A Shirt Cannon?

How to Make a Shirt Cannon

Have you ever wanted to launch a shirt across the room? With a shirt cannon, you can! This simple and inexpensive device is perfect for parties, sporting events, or just for a good laugh.

In this article, we will show you how to make a shirt cannon from materials you can find at your local hardware store. We’ll also provide tips on how to use your shirt cannon safely and effectively.

So what are you waiting for? Let’s get started!

Step	Materials	Instructions
1	Cardboard box	Cut a hole in the side of the box large enough to fit a shirt through.
2	PVC pipe	Cut a piece of PVC pipe to fit inside the hole in the box.
3	Duct tape	Secure the PVC pipe inside the box with duct tape.
4	Shirt	Put a shirt on the PVC pipe.
5	Air compressor	Attach the air compressor to the PVC pipe.
6	Turn on the air compressor	The shirt will be launched out of the box!

A shirt cannon is a device that can be used to launch shirts into the air. It is a popular party favor and can be used to add excitement to any event.

This guide will show you how to make a shirt cannon using PVC pipe, balloons, an air compressor, tape, scissors, a hot glue gun, and newspaper.

Materials

• PVC pipe (1/2-inch diameter)
• Balloons
• Air compressor
• Tape
• Scissors
• Hot glue gun
• Newspaper

Steps

1. Cut the PVC pipe into two pieces, one 12 inches long and one 18 inches long.
2. Connect the two pieces of PVC pipe together with a T-connector.
3. Attach a balloon to the end of the 12-inch piece of PVC pipe.
4. Connect the air compressor to the T-connector.
5. Turn on the air compressor and watch the shirt fly!

Tips

• Use a large balloon for the best results.
• Make sure the air compressor is turned on before you attach the balloon.
• Hold the shirt cannon firmly in place when you turn on the air compressor.
• Be careful not to point the shirt cannon at anyone.

A shirt cannon is a fun and easy way to add excitement to any event. With a few simple materials, you can make your own shirt cannon and enjoy hours of fun.

Here are some additional tips for making a shirt cannon:

• Use a PVC pipe that is the same diameter as the balloons you will be using.
• Make sure the T-connector is securely attached to the PVC pipe.
• Use a strong tape to attach the balloon to the PVC pipe.
• Turn the air compressor on slowly and gradually increase the pressure until the balloon is full.
• Hold the shirt cannon firmly in place when you turn on the air compressor.
• Be careful not to point the shirt cannon at anyone.

Materials

• 1/2-inch PVC pipe (10 feet)
• 1/2-inch PVC caps (2)
• 1/2-inch PVC tee
• 1/2-inch PVC elbow
• 1/2-inch PVC union
• 1/2-inch PVC pipe clamps (2)
• 1/2-inch PVC end caps (2)
• 1/2-inch PVC primer
• 1/2-inch PVC cement
• Newspaper
• Duct tape
• Balloons
• Shirt

Instructions

1. Cut the PVC pipe into the following lengths:

• 1 piece 10 inches long
• 1 piece 6 inches long
• 1 piece 4 inches long
• 1 piece 2 inches long

2. Glue the 10-inch piece of PVC pipe to the bottom of the 6-inch piece of PVC pipe.

3. Glue the 4-inch piece of PVC pipe to the top of the 6-inch piece of PVC pipe.

4. Glue the 2-inch piece of PVC pipe to the end of the 4-inch piece of PVC pipe.

5. Glue the PVC caps to the ends of the 10-inch and 6-inch pieces of PVC pipe.

6. Apply PVC primer to the inside of the 1/2-inch PVC tee.

7. Insert the 10-inch piece of PVC pipe into the 1/2-inch PVC tee.

8. Apply PVC primer to the inside of the 1/2-inch PVC elbow.

9. Insert the 6-inch piece of PVC pipe into the 1/2-inch PVC elbow.

10. Apply PVC primer to the inside of the 1/2-inch PVC union.

11. Insert the 4-inch piece of PVC pipe into the 1/2-inch PVC union.

12. Apply PVC primer to the inside of the 1/2-inch PVC pipe clamps.

13. Clamp the 1/2-inch PVC pipe clamps around the 10-inch and 6-inch pieces of PVC pipe.

14. Apply PVC cement to the outside of the 1/2-inch PVC tee.

15. Insert the 10-inch piece of PVC pipe into the 1/2-inch PVC tee.

16. Apply PVC cement to the outside of the 1/2-inch PVC elbow.

17. Insert the 6-inch piece of PVC pipe into the 1/2-inch PVC elbow.

18. Apply PVC cement to the outside of the 1/2-inch PVC union.

19. Insert the 4-inch piece of PVC pipe into the 1/2-inch PVC union.

20. Allow the PVC cement to dry for 24 hours.

21. Cover the inside of the shirt cannon with newspaper.

22. Tape the newspaper in place.

23. Blow up a balloon and tie it off.

24. Insert the balloon into the shirt cannon.

25. Pull the trigger to launch the shirt.

Tips

• Use a sharp knife to cut the PVC pipe.
• Make sure that the PVC pipe is glued and clamped securely.
• Use newspaper to protect the inside of the shirt cannon.
• Tape the newspaper in place securely.
• Blow up the balloon until it is firm, but not too tight.
• Insert the balloon into the shirt cannon carefully.
• Pull the trigger slowly and smoothly.

A shirt cannon is a fun and easy way to launch shirts. It is a great way to entertain guests at a party or event. With a little bit of time and effort, you can make your own shirt cannon at home.

How To Make A Shirt Cannon?

Q: What materials do I need to make a shirt cannon?

A: You will need the following materials:

• A cardboard tube (such as a paper towel roll)
• A balloon
• A piece of string
• Tape
• Scissors

Q: How do I assemble the shirt cannon?

A: To assemble the shirt cannon, follow these steps:

1. Cut the balloon in half.
2. Tape the open end of the balloon to the end of the cardboard tube.
3. Tie the string to the other end of the balloon.
4. Hold the shirt cannon by the string and stretch the balloon out.
5. Release the balloon to launch the shirt.

Q: How do I make the shirt cannon launch further?

A: There are a few things you can do to make the shirt cannon launch further:

• Use a larger balloon.
• Use a longer cardboard tube.
• Stretch the balloon out more before releasing it.
• Launch the shirt cannon from a higher elevation.

Q: What are some safety precautions I should take when using a shirt cannon?

A: When using a shirt cannon, it is important to take the following safety precautions:

• Do not point the shirt cannon at anyone.
• Launch the shirt cannon in a clear area away from people and objects.
• Be careful not to overstretch the balloon, as this could cause it to burst.
• Dispose of used balloons properly.

Q: Where can I buy a shirt cannon?

A: You can purchase a shirt cannon online or at some party supply stores.

making a shirt cannon is a fun and easy project that can be completed with a few simple materials. By following the steps in this guide, you can create your own shirt cannon that will provide hours of entertainment for you and your friends.

Here are some key takeaways from this guide:

• Shirt cannons are made from PVC pipes, air compressors, and other common household items.
• The process of making a shirt cannon is relatively simple and can be completed in a few hours.
• Shirt cannons are a fun and safe way to entertain yourself and your friends.
• Be sure to follow all safety precautions when using a shirt cannon.