How To Unmount Blink Doorbell?

How to Unmount Your Blink Doorbell

Your Blink doorbell is a great way to keep an eye on your home, but what happens when you want to remove it? Whether you’re moving to a new house or you’re simply tired of the doorbell, it’s easy to remove your Blink doorbell.

In this article, we’ll walk you through the steps of removing your Blink doorbell, step-by-step. We’ll also provide some tips on how to mount your doorbell again if you ever decide to reinstall it.

So if you’re ready to learn how to remove your Blink doorbell, keep reading!

Step	Instructions	Image
1	Power off the Blink Doorbell by unplugging it from the power outlet.
2	Remove the two screws on the back of the Blink Doorbell using a Phillips head screwdriver.
3	Gently pry the Blink Doorbell away from the wall using a flathead screwdriver.
4	Disconnect the power cable from the back of the Blink Doorbell.
5	Reattach the two screws to the back of the Blink Doorbell.
6	Plug the Blink Doorbell back into the power outlet.

This guide will show you how to safely and easily unmount your Blink Doorbell. By following these steps, you can remove your Blink Doorbell without damaging the device or the wall.

Gather the necessary tools and materials

To unmount your Blink Doorbell, you will need the following tools and materials:

• Phillips head screwdriver
• Needle nose pliers
• Tape measure
• Level
• Pencil
• Safety glasses

Disconnect the power to the Blink Doorbell

Before you can unmount your Blink Doorbell, you must first disconnect the power to the device. To do this, follow these steps:

1. Locate the power supply to the Blink Doorbell. This is typically a small box that is located near the doorbell.
2. Turn off the power supply. There should be a switch on the power supply that you can use to turn off the power.
3. Wait for the Blink Doorbell to power down. This may take a few minutes.

Remove the Blink Doorbell from the wall

Now that the power to the Blink Doorbell has been disconnected, you can remove the device from the wall. To do this, follow these steps:

1. Use a Phillips head screwdriver to remove the screws that are holding the Blink Doorbell to the wall.
2. Use a needle nose pliers to pry off the plastic cover that is covering the wires.
3. Disconnect the wires from the Blink Doorbell.
4. Carefully remove the Blink Doorbell from the wall.

**

Reinstall the Blink Doorbell

If you are reinstalling the Blink Doorbell, you can follow these steps:

1. Align the Blink Doorbell with the holes in the wall.
2. Insert the screws into the holes and tighten them with a Phillips head screwdriver.
3. Replace the plastic cover that is covering the wires.
4. Connect the wires to the Blink Doorbell.

By following these steps, you can safely and easily unmount your Blink Doorbell. If you have any questions, please consult the Blink Doorbell user manual.

How to Unmount a Blink Doorbell

This guide will show you how to safely and easily remove your Blink Doorbell from your wall.

What you will need:

• A Phillips head screwdriver
• A stepladder or stool (if needed)

Step 1: Turn off the power to the Blink Doorbell

Before you begin, it’s important to turn off the power to the Blink Doorbell. This will prevent any accidental injuries.

To do this, locate the breaker box for your home and find the breaker that controls the power to the Blink Doorbell. Flip the breaker to the “off” position.

Step 2: Remove the screws that secure the Blink Doorbell to the wall

Once the power to the Blink Doorbell is off, you can begin to remove the screws that secure it to the wall.

The Blink Doorbell is typically secured to the wall with two screws. These screws are located at the top and bottom of the device.

Use a Phillips head screwdriver to remove the screws.

Step 3: Carefully remove the Blink Doorbell from the wall

Once the screws are removed, you can carefully remove the Blink Doorbell from the wall.

Hold the Blink Doorbell firmly in one hand and use the other hand to unscrew the screws.

Once the screws are removed, you can gently pull the Blink Doorbell away from the wall.

Step 4: Remount the Blink Doorbell

If you want to remount the Blink Doorbell, you can follow the steps above in reverse.

First, choose a new location for the Blink Doorbell. Then, mark the location of the holes for the screws.

Drill the holes for the screws and insert the screws into the holes.

Finally, mount the Blink Doorbell to the wall.

This guide has shown you how to safely and easily remove your Blink Doorbell from your wall.

If you have any questions, please consult the Blink Doorbell user manual.

How do I unmount my Blink Doorbell?

1. Power down the Blink Doorbell. To do this, press and hold the power button for 5 seconds. The light on the front of the doorbell will turn off.
2. Remove the two screws on the back of the doorbell. These screws are located at the top and bottom of the doorbell.
3. Gently pry the doorbell away from the wall. Be careful not to damage the wires.
4. Disconnect the wires from the back of the doorbell. There will be two wires: a power wire and a data wire.
5. Reattach the screws to the wall.
6. Plug the power wire back into the wall outlet.
7. Turn on the Blink Doorbell. The light on the front of the doorbell will turn on.

What if I can’t find the screws?

If you can’t find the screws that hold the Blink Doorbell to the wall, you can try using a small flathead screwdriver to pry the doorbell away from the wall. Be careful not to damage the doorbell.

What if I damage the wires?

If you damage the wires while removing the Blink Doorbell, you can try to repair them yourself. If you are not comfortable doing this, you can contact Blink customer support for assistance.

What if I want to reinstall the Blink Doorbell?

To reinstall the Blink Doorbell, follow these steps:

1. Mount the Blink Doorbell to the wall. Use the two screws that you removed in Step 2 of the “How to Unmount a Blink Doorbell” instructions.
2. Connect the wires to the back of the doorbell. Make sure that the power wire is connected to the red terminal and the data wire is connected to the white terminal.
3. Turn on the Blink Doorbell. The light on the front of the doorbell will turn on.
4. Open the Blink app.
5. Tap the +”** icon in the top right corner of the screen.
6. Select Add Device**.
7. Select Doorbell**.
8. Follow the on-screen instructions to connect the Blink Doorbell to your Wi-Fi network.
9. Once the Blink Doorbell is connected to your Wi-Fi network, it will be ready to use.

un-mounting your Blink Doorbell is a simple process that can be completed in just a few minutes. By following the steps outlined in this guide, you can safely and easily remove your Blink Doorbell from its current location and prepare it for installation in a new spot.

Here are a few key takeaways from this guide:

• Before you begin, make sure that you have the necessary tools and materials on hand.
• Carefully disconnect the power to the Blink Doorbell by unplugging it from the power outlet or turning off the circuit breaker.
• Remove the mounting screws from the back of the Blink Doorbell.
• Gently pry the Blink Doorbell away from the wall or other surface.
• Discard the old mounting screws and use the new ones to mount the Blink Doorbell in its new location.
• Once the Blink Doorbell is securely mounted, reconnect the power and test it to make sure that it is working properly.

By following these steps, you can easily and safely un-mount your Blink Doorbell and prepare it for installation in a new spot.