How To Check Harley Motor Mounts?

Harley Davidson motorcycles are known for their power and performance, but even the most powerful engines need a solid foundation to perform at their best. That’s where the motor mounts come in.

The motor mounts are the rubber cushions that connect the engine to the frame of the motorcycle. They help to absorb vibrations and keep the engine from moving around too much. If the motor mounts are worn out or damaged, it can cause a number of problems, including:

• Engine vibrations that can be uncomfortable for the rider
• Reduced performance
• Damage to the engine or other components

That’s why it’s important to check the motor mounts regularly and replace them if they’re worn out. In this article, we’ll show you how to check the motor mounts on a Harley Davidson motorcycle. We’ll also provide some tips on how to choose the right replacement motor mounts.

Step	Tools	Instructions
1. Inspect the motor mounts for cracks, tears, or other damage.	– Wrench	– Flashlight
2. If the motor mounts are damaged, replace them.	– New motor mounts	– Torque wrench
3. Tighten the motor mounts to the specified torque.	– Torque wrench	– Socket

Harley motor mounts are an important part of your bike’s suspension system. They help to isolate the engine from the chassis and reduce vibrations, which can improve handling and comfort. If your motor mounts are worn out, they can cause a number of problems, including:

• Engine noise
• Harsh shifting
• Poor handling
• Vibrations

It is important to check your motor mounts regularly and replace them as needed. In this guide, we will show you how to check Harley motor mounts.

Identifying Harley Motor Mounts

Harley motor mounts are located on the front and rear of the engine. They are typically made of rubber or polyurethane. The front motor mounts are located on either side of the engine, just below the cylinder heads. The rear motor mounts are located on either side of the transmission, just below the engine.

Checking Harley Motor Mounts

To check Harley motor mounts, you will need to:

1. Jack up the front or rear of the bike.
2. Place a pry bar under the engine and apply pressure.
3. Listen for any clunking or rattling noises.

If you hear any noises, the motor mounts may need to be replaced.

Replacing Harley Motor Mounts

If your motor mounts need to be replaced, you can do so yourself or take your bike to a qualified mechanic. To replace the motor mounts, you will need to:

1. Remove the old motor mounts.
2. Install the new motor mounts.
3. Tighten the bolts to the specified torque.

Checking and replacing Harley motor mounts is an important part of maintaining your bike. By following the steps in this guide, you can keep your bike running smoothly and safely.

How To Check Harley Motor Mounts?

Harley-Davidson motorcycles are known for their powerful engines and smooth ride. However, if your Harley’s motor mounts are worn out, you may experience engine vibrations, engine noise, difficulty shifting gears, or engine stalling.

Motor mounts are rubber or polyurethane bushings that connect the engine to the frame of your motorcycle. They help to isolate the engine from the chassis and absorb vibrations. Over time, the motor mounts can wear out and become damaged, which can lead to a number of problems.

Checking your Harley’s motor mounts is a relatively simple task that you can do yourself. Here’s how:

1. Locate the motor mounts. The motor mounts are located on the bottom of the engine, near the frame. There are usually two or three motor mounts, depending on the model of your Harley.
2. Inspect the motor mounts for damage. Look for cracks, tears, or other signs of wear. If the motor mounts are damaged, they will need to be replaced.
3. Check the motor mounts for play. Grab the engine and try to move it side to side. If there is any play in the motor mounts, they will need to be replaced.

If you find that your Harley’s motor mounts are worn out, you can replace them yourself or have a qualified mechanic do it for you. Replacing the motor mounts is a relatively straightforward job, but it is important to follow the manufacturer’s instructions carefully.

Symptoms of Worn Motor Mounts

If your Harley’s motor mounts are worn out, you may experience the following symptoms:

• Engine vibrations
• Engine noise
• Difficulty shifting gears
• Engine stalling

How to Replace Harley Motor Mounts

To replace Harley motor mounts, you will need to:

1. Remove the old motor mounts.

To remove the old motor mounts, you will need to:

• Remove the bolts that hold the motor mounts to the frame.
• Remove the rubber or polyurethane bushings from the motor mounts.

2. Install the new motor mounts.

To install the new motor mounts, you will need to:

• Apply a thin coat of grease to the threads of the bolts.
• Insert the bolts through the motor mounts and into the frame.
• Tighten the bolts to the specified torque.

3. Tighten the mounting bolts to the specified torque.

The torque specifications for the motor mount bolts are usually listed in the owner’s manual. It is important to tighten the bolts to the specified torque to ensure that the motor mounts are properly installed.

Troubleshooting Harley Motor Mount Problems

If you are having problems with your Harley motor mounts, you may experience:

• Engine vibrations
• Engine noise
• Difficulty shifting gears
• Engine stalling

If you are experiencing any of these problems, it is important to have your Harley motor mounts checked by a qualified mechanic. The mechanic will be able to diagnose the problem and recommend the best course of action.

Harley-Davidson motorcycles are known for their powerful engines and smooth ride. However, if your Harley’s motor mounts are worn out, you may experience engine vibrations, engine noise, difficulty shifting gears, or engine stalling.

Checking your Harley’s motor mounts is a relatively simple task that you can do yourself. If you find that your motor mounts are worn out, you can replace them yourself or have a qualified mechanic do it for you.

By following the steps in this guide, you can help to keep your Harley running smoothly and safely.

How do I check my Harley motor mounts?

There are a few ways to check your Harley motor mounts. Here are the steps involved:

1. Visual inspection: First, you can do a visual inspection of the motor mounts. Look for any cracks, tears, or other damage. If you see any damage, you will need to replace the motor mount.
2. Feel for movement: Next, you can feel for movement in the motor mounts. Place your hand on the motor mount and apply pressure. If you feel any movement, the motor mount is worn out and needs to be replaced.
3. Use a stethoscope: Finally, you can use a stethoscope to listen for any abnormal noises coming from the motor mounts. If you hear any clunking, knocking, or other noises, the motor mount is worn out and needs to be replaced.

What are the symptoms of a bad motor mount?

There are a few symptoms that can indicate a bad motor mount. Here are some of the most common:

• Engine vibration
• Engine noise
• Transmission problems
• Steering problems
• Handling problems

If you experience any of these symptoms, it is important to have your Harley checked by a qualified mechanic.

How do I replace a Harley motor mount?

Replacing a Harley motor mount is a relatively simple task that can be completed in about an hour. Here are the steps involved:

1. Locate the motor mount. The motor mounts are located on the bottom of the engine. There will be one motor mount on each side of the engine.
2. Remove the old motor mount. To remove the old motor mount, you will need to first remove the bolts that hold it in place. Once the bolts are removed, you can carefully pry the motor mount out of place.
3. Install the new motor mount. To install the new motor mount, simply reverse the steps you took to remove the old motor mount. Make sure that the new motor mount is properly aligned and tightened down securely.

**How often should I replace my Harley motor mounts?

The frequency with which you should replace your Harley motor mounts depends on a number of factors, including the type of riding you do, the condition of your bike, and the climate you live in. However, as a general rule, you should replace your Harley motor mounts every 50,000 miles or so.

What are the dangers of driving with a bad motor mount?

Driving with a bad motor mount can be dangerous for a number of reasons. Here are some of the risks involved:

• Engine damage: A bad motor mount can allow the engine to move excessively, which can damage the engine and its components.
• Transmission damage: A bad motor mount can also damage the transmission.
• Steering problems: A bad motor mount can make it difficult to steer the bike, which can lead to accidents.
• Handling problems: A bad motor mount can also make the bike handle poorly, which can also lead to accidents.

If you suspect that you have a bad motor mount, it is important to have it replaced as soon as possible.

Can I drive my Harley with a bad motor mount?

It is not recommended to drive your Harley with a bad motor mount. As mentioned above, driving with a bad motor mount can be dangerous and can lead to damage to your bike. If you have a bad motor mount, it is important to have it replaced as soon as possible.

In this article, we have discussed how to check Harley motor mounts. We have covered the different types of motor mounts, the symptoms of a bad motor mount, and the steps involved in checking your Harley’s motor mounts. We hope that this information has been helpful to you.

Here are the key takeaways from this article:

• There are three main types of Harley motor mounts: rubber, solid, and air-ride.
• The symptoms of a bad motor mount include engine vibration, noise, and shifting.
• To check your Harley’s motor mounts, you will need to jack up the bike and support it with a stand. Then, you will need to remove the motor mount bolts and inspect the mounts for damage.
• If you find that your motor mounts are damaged, you will need to replace them.

We recommend that you have your Harley’s motor mounts checked regularly by a qualified mechanic. This will help to ensure that your bike is running smoothly and safely.