How To Fix Bent Recliner Mechanism?

How to Fix a Bent Recliner Mechanism

Your recliner is one of the most comfortable pieces of furniture in your home. It’s the perfect place to relax after a long day or watch a movie. But what happens when the recliner mechanism gets bent? You can’t relax in your recliner, and you’re left wondering how to fix it.

Don’t worry, fixing a bent recliner mechanism is easier than you think. In this article, we’ll walk you through the steps on how to fix a bent recliner mechanism. We’ll also provide tips on how to prevent your recliner from getting bent in the future.

So if your recliner is broken, don’t despair. With a little bit of time and effort, you can have it fixed in no time.

Test the recliner to make sure it is working properly.

Step	Instructions	Image
1	Locate the recliner mechanism. It is usually located in the back of the chair, near the bottom.
2	Remove the screws that hold the mechanism in place.
3	Gently bend the mechanism back into place.
4	Reattach the screws.
5

How To Fix Bent Recliner Mechanism?

Identifying the Problem

There are a few signs that your recliner mechanism may be bent.

• The recliner may not be able to recline or extend all the way.
• The recliner may make a loud noise when you try to recline or extend it.
• The recliner may be difficult to recline or extend.
• The recliner may not stay in the desired position.

If you notice any of these signs, it’s possible that the recliner mechanism is bent. However, it’s also possible that the problem is with the recliner itself. To be sure, you’ll need to take a closer look at the mechanism.

Disassembling the Recliner

To disassemble the recliner, you’ll need the following tools:

• A screwdriver
• A wrench
• A pry bar

1. First, remove the screws that hold the backrest to the seat.
2. Next, remove the screws that hold the armrests to the seat.
3. Now, you can remove the backrest and armrests.
4. Finally, you can remove the screws that hold the mechanism to the seat.

Once you’ve disassembled the recliner, you can take a closer look at the mechanism. If you see any bent or damaged parts, you’ll need to replace them.

Replacing the Mechanism

To replace the mechanism, you’ll need the following parts:

• A new recliner mechanism
• A screwdriver
• A wrench
• A pry bar

1. First, remove the old mechanism.
2. Next, install the new mechanism.
3. Finally, reassemble the recliner.

Once you’ve reassembled the recliner, you can test it to make sure it’s working properly. If the recliner is still not working properly, you may need to take it to a professional for repairs.

Fixing a bent recliner mechanism is a relatively simple process. However, it’s important to make sure that you’re doing it correctly. If you’re not sure how to fix the mechanism, it’s best to take it to a professional.

Repairing the Mechanism

There are a few different ways to repair a bent recliner mechanism. The best way for you will depend on the specific type of mechanism and the extent of the damage.

Method 1: Using a Hammer

This method is only suitable for mechanisms that are made of metal. If your mechanism is made of plastic, this method could damage it further.

1. Remove the recliner from the wall or other structure it is attached to.
2. Locate the bent part of the mechanism.
3. Hold the mechanism firmly in place with one hand.
4. Use a hammer to gently tap the bent part of the mechanism until it is straightened out.
5. Reattach the recliner to the wall or other structure.

Method 2: Using a Pliers

This method is suitable for mechanisms that are made of metal or plastic.

1. Remove the recliner from the wall or other structure it is attached to.
2. Locate the bent part of the mechanism.
3. Use a pair of pliers to gently bend the bent part of the mechanism back into place.
4. Reattach the recliner to the wall or other structure.

Method 3: Using a Vise

This method is only suitable for mechanisms that are made of metal. If your mechanism is made of plastic, this method could damage it further.

1. Remove the recliner from the wall or other structure it is attached to.
2. Locate the bent part of the mechanism.
3. Place the mechanism in a vise so that the bent part is secured.
4. Use a hammer or pliers to gently bend the bent part of the mechanism back into place.
5. Reattach the recliner to the wall or other structure.

What materials will you need?

For any of these methods, you will need the following materials:

• A hammer
• A pair of pliers
• A vise
• A screwdriver
• A wrench
• Penetrating oil

If you are unable to repair the recliner mechanism yourself, you can take it to a qualified repair technician.

How do I fix a bent recliner mechanism?

There are a few ways to fix a bent recliner mechanism. Here are two methods:

1. Using a hammer and nails

• Remove the back of the recliner.
• Locate the bent metal rod that is attached to the recliner mechanism.
• Use a hammer and nails to straighten the metal rod.
• Reattach the back of the recliner.

2. Using a screwdriver and pliers

• Remove the back of the recliner.
• Locate the bent metal rod that is attached to the recliner mechanism.
• Use a screwdriver to loosen the screws that are holding the metal rod in place.
• Use pliers to straighten the metal rod.
• Retighten the screws that are holding the metal rod in place.

What are the signs of a bent recliner mechanism?

There are a few signs that your recliner mechanism may be bent. These include:

• The recliner is difficult to open or close.
• The recliner does not stay in the desired position.
• The recliner makes a creaking or popping sound when it is used.
• The recliner is uneven when it is in the upright position.

How can I prevent a recliner mechanism from bending?

There are a few things you can do to prevent your recliner mechanism from bending. These include:

• Do not overextend the recliner.
• Do not sit on the edge of the recliner.
• Avoid putting heavy objects on the recliner.
• Keep the recliner clean and free of debris.

What should I do if I can’t fix the recliner mechanism myself?

If you are unable to fix the recliner mechanism yourself, you should contact a professional. A professional will be able to diagnose the problem and make the necessary repairs.

In this blog post, we have discussed how to fix a bent recliner mechanism. We have provided step-by-step instructions on how to identify the problem, remove the recliner mechanism, and repair or replace it. We have also provided tips on how to prevent your recliner from becoming bent in the future.

We hope that this blog post has been helpful. If you have any further questions, please do not hesitate to contact us.