How To Change Code On Honeywell Door Lock?

How to Change Code on Honeywell Door Lock

Your Honeywell door lock is a great way to keep your home secure, but what happens if you forget your code? Or worse, what if someone else figures it out? In either case, you’ll need to know how to change the code on your Honeywell door lock.

Changing the code on your Honeywell door lock is a simple process, and it only takes a few minutes. In this article, we’ll walk you through the steps involved, so you can be sure your home is always secure.

What You’ll Need

To change the code on your Honeywell door lock, you’ll need the following items:

• Your Honeywell door lock
• The new code you want to use
• A paper clip or other thin object

Steps to Change the Code

1. Press and hold the [[]*]* button on the keypad for five seconds. The lock will beep and the LED light will flash green.
2. Enter your current code. The lock will beep and the LED light will flash green.
3. Enter your new code twice. The lock will beep and the LED light will flash green.
4. Press the [[]*]* button to confirm.** The lock will beep and the LED light will turn off.

Your Honeywell door lock is now set with your new code.

Step	Instructions	Image
1	Press and hold the “” key for 3 seconds.
2	Enter your current code.
3	Enter your new code twice.
4	Your code has been changed!

How to Change Code on Honeywell Door Lock

What You Will Need

To change the code on your Honeywell door lock, you will need the following items:

• A new code
• A paper clip or other small, thin object
• Your Honeywell door lock’s programming mode code

Steps to Change the Code

1. Enter programming mode. To enter programming mode, press and hold the S button on your Honeywell door lock for 5 seconds. The light on the lock will flash green to indicate that you are in programming mode.
2. Enter your old code. Once you are in programming mode, enter your old code using the keypad.
3. Enter your new code. After you have entered your old code, enter your new code using the keypad.
4. Confirm your new code. Once you have entered your new code, confirm it by entering it again.
5. Exit programming mode. To exit programming mode, press and hold the S button on your Honeywell door lock for 5 seconds. The light on the lock will flash green to indicate that you have successfully exited programming mode.

Troubleshooting

If you are having trouble changing the code on your Honeywell door lock, here are a few things you can check:

• Make sure that you are entering the code correctly.
• Make sure that you are in programming mode.
• Try resetting your Honeywell door lock to factory defaults.

If you are still having trouble, you can contact Honeywell customer support for assistance.

Changing the code on your Honeywell door lock is a simple process that can help to keep your home safe. By following the steps in this guide, you can easily change your code and protect your home from intruders.

How to Change Code on Honeywell Door Lock?

Honeywell door locks are some of the most popular and secure locks on the market. They’re easy to use and install, and they offer a variety of features that make them a great choice for both residential and commercial applications.

One of the most important features of a Honeywell door lock is the ability to change the code. This is important for security purposes, as it allows you to keep your lock safe from unauthorized access.

Changing the code on a Honeywell door lock is a simple process. Here’s how to do it:

1. Unlock the door and open it.
2. Press and hold the [] button on the keypad for 3 seconds.**
3. Enter the old code.
4. Enter the new code twice.
5. Press the [] button to confirm.**

The new code will now be active.

Common Problems and Solutions

There are a few common problems that you may encounter when trying to change the code on your Honeywell door lock. Here are some solutions to these problems:

• The lock is not responding to the keypad. Make sure that the batteries in the lock are fresh. If the batteries are low, the lock may not be able to power the keypad.
• The lock is not accepting the new code. Make sure that you are entering the code correctly. The code should be 4 digits long, and it should not contain any spaces.
• The lock is still locking and unlocking with the old code. You may need to reset the lock to factory settings. To do this, hold down the [] and [*] buttons on the keypad for 10 seconds. The lock will beep and the lights will flash. Once the lock has reset, you can enter the new code.

Tips for Keeping Your Door Lock Secure

There are a few things you can do to keep your Honeywell door lock secure:

• Use a strong code. Your code should be at least 4 digits long, and it should not contain any obvious patterns.
• Change your code regularly. This will help to keep your lock safe from unauthorized access.
• Don’t share your code with anyone. Your code is personal, and you should not share it with anyone.
• Be aware of your surroundings. If you see someone trying to break into your door, call the police immediately.

By following these tips, you can help to keep your Honeywell door lock secure.

Changing the code on your Honeywell door lock is a simple process. By following the steps in this guide, you can easily keep your lock safe from unauthorized access.

For more information on Honeywell door locks, please visit the Honeywell website.

How do I change the code on my Honeywell door lock?

1. Press and hold the [Learn] button on the lock for 3 seconds. The light on the lock will flash green.
2. Enter your current code. The light on the lock will flash green again.
3. Enter your new code twice. The light on the lock will flash green once for each time you enter your new code.
4. Press the [Learn] button again to exit programming mode. The light on the lock will turn off.

What if I forget my code?

If you forget your code, you can reset it to the default code by following these steps:

1. Press and hold the [Learn] button on the lock for 10 seconds. The light on the lock will flash red.
2. Enter the default code (1234). The light on the lock will flash green.
3. Press the [Learn] button again to exit programming mode. The light on the lock will turn off.

Can I change the code on my Honeywell door lock remotely?

Yes, you can change the code on your Honeywell door lock remotely using the Honeywell Home app. To do this, follow these steps:

1. Open the Honeywell Home app and tap on Door Locks.
2. Tap on the name of your door lock.
3. Tap on Settings.
4. Tap on Code.
5. Enter your current code.
6. Enter your new code twice.
7. Tap on Save.

What are the different types of codes that I can use on my Honeywell door lock?

There are three types of codes that you can use on your Honeywell door lock:

• Master code: This is the code that you use to program the lock and to change the other codes.
• User code: This is the code that you use to unlock the lock. You can create up to 30 user codes.
• Temporary code: This is a code that you can create for guests or visitors. Temporary codes expire after a certain amount of time.

How do I delete a code from my Honeywell door lock?

To delete a code from your Honeywell door lock, follow these steps:

1. Press and hold the [Learn] button on the lock for 3 seconds. The light on the lock will flash green.
2. Enter the code that you want to delete. The light on the lock will flash red.
3. Press the [Learn] button again to exit programming mode. The light on the lock will turn off.

What if I have other questions about my Honeywell door lock?

If you have other questions about your Honeywell door lock, you can contact Honeywell customer support for assistance. You can find contact information on the Honeywell website.

Changing the code on your Honeywell door lock is a simple process that can be completed in just a few minutes. By following the steps outlined in this guide, you can ensure that your lock is secure and that only authorized individuals have access to your home.

Here are the key takeaways from this guide:

• To change the code on your Honeywell door lock, you will need to enter the current code, followed by the new code twice.
• If you forget your code, you can reset it by entering the master code, followed by the new code twice.
• The master code is typically 0000, but it may be different depending on your lock model.
• You can also change the code on your Honeywell door lock using the Honeywell Home app.

By following these steps, you can easily keep your Honeywell door lock secure and ensure that only authorized individuals have access to your home.