How To Change Batteries On Kwikset Smartcode 909?

How to Change Batteries on a Kwikset SmartCode 909

Your Kwikset SmartCode 909 door lock is a great way to keep your home secure, but what happens when the batteries start to run low? Don’t worry, changing the batteries is a simple process that can be completed in just a few minutes.

In this article, we’ll walk you through the steps of changing the batteries on your Kwikset SmartCode 909 door lock. We’ll also provide some tips on how to keep your lock functioning properly for years to come.

So, if you’re ready to learn how to change the batteries on your Kwikset SmartCode 909 door lock, keep reading!

Step	Instructions	Image
1	Remove the cover plate from the keypad.
2	Remove the two old batteries from the keypad.
3	Insert two new batteries into the keypad, making sure that the positive and negative terminals are aligned correctly.
4	Replace the cover plate on the keypad.

How to Change Batteries on a Kwikset Smartcode 909

The Kwikset Smartcode 909 is a smart lock that allows you to lock and unlock your door with your smartphone. It also has a keypad that you can use to enter a code to unlock the door. The batteries in the Kwikset Smartcode 909 last for about two years, but they will eventually need to be replaced.

This guide will show you how to change the batteries in your Kwikset Smartcode 909.

Tools and Materials Needed

• Kwikset Smartcode 909 lock
• Phillips head screwdriver
• AA batteries (2)

Steps to Change Batteries

1. Turn off the power to the lock. This can be done by turning the power switch on the back of the lock to the “Off” position.
2. Remove the cover plate. The cover plate is located on the front of the lock. To remove it, use a Phillips head screwdriver to unscrew the two screws that hold it in place.
3. Remove the batteries. The batteries are located in a compartment behind the cover plate. To remove them, slide the release tab on the side of the compartment and lift up on the batteries.
4. Insert the new batteries. Make sure that the positive and negative terminals of the batteries are aligned correctly.
5. Replace the cover plate. Slide the cover plate back into place and secure it with the two screws.
6. Turn on the power to the lock. Turn the power switch on the back of the lock to the “On” position.

Your Kwikset Smartcode 909 is now ready to use with its new batteries.

Changing the batteries in your Kwikset Smartcode 909 is a simple process that can be completed in a few minutes. By following the steps in this guide, you can keep your lock working properly and ensure that you can always access your home.

How To Change Batteries On Kwikset Smartcode 909?

The Kwikset Smartcode 909 is a smart lock that allows you to lock and unlock your door with your smartphone. It also has a keypad that you can use to enter a code to unlock the door. If the batteries in your Kwikset Smartcode 909 are running low, you will need to replace them. This is a simple process that can be completed in a few minutes.

1. Prepare your tools

To change the batteries in your Kwikset Smartcode 909, you will need the following tools:

• A Phillips head screwdriver
• A small flathead screwdriver

2. Turn off the power to the lock

Before you begin changing the batteries, you will need to turn off the power to the lock. This will prevent you from accidentally shocking yourself. To do this, locate the small switch on the back of the lock. Slide the switch to the “Off” position.

3. Remove the cover plate from the lock

The cover plate on the Kwikset Smartcode 909 is held in place by two screws. Use the Phillips head screwdriver to remove the screws. Once the screws are removed, you can carefully pry the cover plate off of the lock.

4. Locate the battery compartment

The battery compartment is located inside the lock. It is a small, rectangular compartment that is located on the back of the lock. To access the battery compartment, you will need to use the small flathead screwdriver to pry open the door of the compartment.

5. Remove the old batteries

The old batteries are located in the battery compartment. They are two small, round batteries that are held in place by a metal clip. To remove the old batteries, use the flathead screwdriver to pry up the metal clip. Once the clip is pried up, you can carefully remove the old batteries from the compartment.

6. Insert the new batteries

The new batteries are also two small, round batteries. They are the same size as the old batteries. To insert the new batteries, carefully slide them into the battery compartment. Make sure that the positive and negative terminals of the batteries are facing the correct way.

7. Replace the battery compartment door

Once the new batteries are inserted, you can replace the battery compartment door. Press down on the door until it snaps into place.

8. Turn on the power to the lock

Now that you have replaced the batteries, you can turn on the power to the lock. Slide the switch on the back of the lock to the “On” position.

Changing the batteries in your Kwikset Smartcode 909 is a simple process that can be completed in a few minutes. By following these steps, you can keep your lock working properly and ensure that you can always access your home.

How do I change the batteries on my Kwikset SmartCode 909?

1. Turn off the power to the lock. This can be done by turning off the breaker that powers the lock, or by removing the batteries from the lock.
2. Remove the cover plate. The cover plate is located on the front of the lock, and is held in place by two screws. Remove the screws and set the cover plate aside.
3. Locate the battery compartment. The battery compartment is located on the inside of the lock, near the top.
4. Remove the old batteries. The old batteries are held in place by a small tab. Press down on the tab and slide the batteries out of the compartment.
5. Insert the new batteries. Make sure that the positive and negative terminals of the batteries are aligned correctly.
6. Replace the cover plate. Secure the cover plate in place with the two screws.
7. Turn on the power to the lock. The lock should now be operational with the new batteries.

What type of batteries does the Kwikset SmartCode 909 use?

The Kwikset SmartCode 909 uses two AA batteries.

How long do the batteries last in the Kwikset SmartCode 909?

The batteries in the Kwikset SmartCode 909 typically last for about one year. However, the battery life may vary depending on the usage of the lock.

What happens if the batteries in the Kwikset SmartCode 909 die?

If the batteries in the Kwikset SmartCode 909 die, the lock will no longer be operational. You will not be able to use the keypad to unlock the door, and the lock will not be able to communicate with your smartphone.

How do I reset the Kwikset SmartCode 909 if the batteries die?

If the batteries in the Kwikset SmartCode 909 die, you will need to reset the lock. To do this, follow these steps:

1. Turn off the power to the lock. This can be done by turning off the breaker that powers the lock, or by removing the batteries from the lock.
2. Press and hold the “” key on the keypad for five seconds. The lock will beep and the LED will flash green.
3. Enter your master code. The lock will beep and the LED will flash green.
4. Press the “S” key. The lock will beep and the LED will flash green.
5. The lock is now reset. You can now turn on the power to the lock and use it as normal.

Can I use rechargeable batteries in the Kwikset SmartCode 909?

Yes, you can use rechargeable batteries in the Kwikset SmartCode 909. However, you should be aware that rechargeable batteries may not last as long as alkaline batteries.

Where can I buy batteries for the Kwikset SmartCode 909?

You can buy batteries for the Kwikset SmartCode 909 at most hardware stores and online retailers.

Changing the batteries in your Kwikset SmartCode 909 door lock is a simple process that can be completed in just a few minutes. By following the steps outlined in this guide, you can ensure that your lock is always functioning properly and that you have access to your home whenever you need it.

Here are the key takeaways from this guide:

• To change the batteries in your Kwikset SmartCode 909 door lock, you will need a Phillips head screwdriver and two AA batteries.
• The batteries are located in the back of the lock, behind the keypad.
• To remove the batteries, you will need to unscrew the two Phillips head screws that hold the cover in place.
• Once the cover is removed, you can easily remove the old batteries and insert the new ones.
• Be sure to replace the cover and tighten the screws securely.
• By following these steps, you can easily change the batteries in your Kwikset SmartCode 909 door lock and keep it functioning properly for years to come.