How To Change Batteries In Vivint Door Lock?

How to Change Batteries in Vivint Door Lock

Your Vivint door lock is a convenient and secure way to keep your home safe, but what happens when the batteries start to run low? Don’t worry, changing the batteries in your Vivint door lock is a simple process that can be completed in just a few minutes.

In this article, we’ll walk you through the steps on how to change the batteries in your Vivint door lock. We’ll also provide some tips on how to keep your door lock running smoothly and securely.

So, if you’re ready to learn how to change the batteries in your Vivint door lock, read on!

Step	Instructions	Image
1	Locate the battery compartment on the back of the lock.
2	Use a coin to pry open the battery compartment.
3	Remove the old batteries.
4	Insert the new batteries, making sure to match the positive and negative terminals.
5	Close the battery compartment.

Tools and Materials Needed

To change the batteries in your Vivint door lock, you will need the following tools and materials:

• Vivint door lock
• Phillips head screwdriver
• 9-volt battery
• Replacement 9-volt battery

Steps to Change Batteries

1. Turn off the power to the door lock. This can usually be done by flipping a switch on the back of the lock.
2. Remove the cover plate. The cover plate is located on the inside of the door, near the lock. It is held in place by a few screws. Use the Phillips head screwdriver to remove the screws and then remove the cover plate.
3. Locate the battery compartment. The battery compartment is located on the inside of the lock. It is a small, rectangular compartment with a door that is held in place by a clip. Use your fingernail or a small screwdriver to pry open the door.
4. Remove the old batteries. The old batteries are located in the battery compartment. They are held in place by a small metal tab. Use your fingers to carefully lift up the tab and then remove the batteries.
5. Insert the new batteries. The new batteries should be inserted into the battery compartment with the positive terminals facing up. Make sure that the batteries are inserted correctly, as they can be inserted incorrectly.
6. Close the battery compartment door. Close the battery compartment door by pressing down on it until it snaps into place.
7. Turn on the power to the door lock. This can usually be done by flipping the switch on the back of the lock.
8. Test the door lock. Try to lock and unlock the door to make sure that the door lock is working properly.

Changing the batteries in your Vivint door lock is a simple process that can be completed in a few minutes. By following these steps, you can keep your door lock working properly and ensure that it is always protected.

Here are some additional tips for changing the batteries in your Vivint door lock:

• Make sure that you use the correct type of batteries. Vivint door locks require 9-volt batteries.
• Do not mix old and new batteries. Always use new batteries when replacing the batteries in your door lock.
• Be careful not to damage the battery compartment when you are removing or inserting the batteries.
• If you are having trouble changing the batteries in your door lock, you can contact Vivint customer support for assistance.

How To Change Batteries In Vivint Door Lock?

Vivint door locks are a great way to keep your home secure, but they do require regular maintenance, such as changing the batteries. Fortunately, changing the batteries in a Vivint door lock is a relatively simple task that can be completed in just a few minutes.

Here are the steps on how to change the batteries in your Vivint door lock:

1. Prepare your tools

Before you begin, you will need to gather the following tools:

• A Phillips head screwdriver
• A small flathead screwdriver
• A new set of batteries (4 AA batteries)

2. Power down the door lock

Before you can remove the cover plate, you will need to power down the door lock. To do this, locate the small button on the inside of the door lock and press it for 5 seconds. The light on the door lock will turn off, indicating that it has been powered down.

3. Remove the cover plate from the front of the door lock.

The cover plate on a Vivint door lock is held in place by two screws. Using the Phillips head screwdriver, unscrew the two screws that are located at the top and bottom of the cover plate.

Once the screws are removed, you can carefully pry the cover plate off of the door lock. Be careful not to damage the door lock.

4. Locate the battery compartment.

The battery compartment is located inside the door lock. It is a small, rectangular compartment that is located near the top of the door lock.

To access the battery compartment, you will need to use the small flathead screwdriver to pry open the door lock’s door. Be careful not to damage the door lock.

5. Remove the old batteries.

Once you have accessed the battery compartment, you can remove the old batteries. The old batteries will be located in a small, rectangular tray.

To remove the old batteries, simply lift up on the tray and slide the batteries out.

6. Insert the new batteries.

Now that you have removed the old batteries, you can insert the new batteries. The new batteries will be located in a small, rectangular tray.

To insert the new batteries, simply slide them into the tray and then lower the tray back into place.

7. Reinstall the cover plate.

Once you have inserted the new batteries, you can reinstall the cover plate. To do this, simply align the cover plate with the door lock and then press down on it until it snaps into place.

8. Power up the door lock.

Once you have reinstalled the cover plate, you can power up the door lock. To do this, locate the small button on the inside of the door lock and press it for 5 seconds. The light on the door lock will turn on, indicating that it has been powered up.

That’s it! You have now successfully changed the batteries in your Vivint door lock. By following these simple steps, you can keep your door lock in good working order and ensure that it is always protected.

How do I change the batteries in my Vivint door lock?

1. Turn off the power to the lock. This can be done by turning off the breaker that powers the lock, or by removing the battery backup.
2. Remove the old batteries. The batteries are located in a compartment at the bottom of the lock. To remove them, slide the release button and pull the batteries out.
3. Insert the new batteries. Make sure that the batteries are inserted in the correct orientation. The positive (+) side of the battery should face up.
4. Replace the battery cover. Slide the battery cover back into place until it clicks.
5. Turn on the power to the lock. The lock will now be operational with the new batteries.

What type of batteries does my Vivint door lock use?

Your Vivint door lock uses two AA batteries.

How long do the batteries last in my Vivint door lock?

The batteries in your Vivint door lock will typically last for about six months. However, the battery life may vary depending on the usage of the lock.

What happens if the batteries in my Vivint door lock die?

If the batteries in your Vivint door lock die, the lock will not be able to operate. You will not be able to use the lock to unlock or lock your door, and the lock will not be able to communicate with the Vivint system.

How do I check the battery level in my Vivint door lock?

You can check the battery level in your Vivint door lock by following these steps:

1. Press the Menu button on the lock.
2. Use the arrow buttons to scroll to Settings.
3. Press the Enter button.
4. Use the arrow buttons to scroll to Battery.
5. Press the Enter button.

The battery level will be displayed on the screen.

What do I do if the batteries in my Vivint door lock are low?

If the batteries in your Vivint door lock are low, you will receive a notification on your Vivint app. You can also check the battery level by following the steps in the previous question.

To replace the batteries, follow the steps in the first question.

What if I can’t change the batteries in my Vivint door lock?

If you are unable to change the batteries in your Vivint door lock, you can contact Vivint customer support for assistance.

In this article, we have discussed how to change the batteries in a Vivint door lock. We have covered the steps involved in the process, as well as some tips and tricks to make it easier. We hope that this information has been helpful, and that you are now able to change the batteries in your Vivint door lock with ease.

Here are some key takeaways from this article:

• The batteries in a Vivint door lock typically last for about two years.
• To change the batteries, you will need to remove the cover on the front of the lock.
• The batteries are located in a compartment at the bottom of the lock.
• You will need to use a Phillips head screwdriver to remove the screws that hold the cover in place.
• Once the cover is removed, you can easily access the batteries.
• To install the new batteries, simply slide them into the compartment and replace the cover.
• Be sure to tighten the screws securely to prevent the cover from coming loose.

We hope that this article has been helpful. If you have any other questions about how to change the batteries in your Vivint door lock, please do not hesitate to contact Vivint customer support.