How To Add Transmission Fluid To A 2014 Dodge Durango?

How to Add Transmission Fluid to a 2014 Dodge Durango

Your 2014 Dodge Durango’s transmission fluid is responsible for keeping the gears inside your transmission lubricated and cool. Over time, this fluid can break down and become contaminated, which can lead to problems with your transmission. By regularly checking and adding transmission fluid as needed, you can help keep your Durango running smoothly for many miles to come.

In this article, we’ll show you how to add transmission fluid to a 2014 Dodge Durango. We’ll also provide some tips on how to maintain your transmission and keep it running in top condition.

So if you’re ready to learn how to add transmission fluid to your Durango, read on!

How To Add Transmission Fluid To A 2014 Dodge Durango?

| Step | Instructions |
|—|—|
| 1 | Park the Durango on a level surface. |
| 2 | Turn off the engine and allow it to cool down. |
| 3 | Locate the transmission fluid dipstick. It is typically located on the driver’s side of the engine block. |
| 4 | Remove the dipstick and wipe it clean with a rag. |
| 5 | Reinsert the dipstick and pull it out again. Note the fluid level. |
| 6 | If the fluid level is low, add the appropriate type and amount of fluid to the reservoir. |
| 7 | Replace the dipstick and start the engine. |
| 8 | Drive the Durango around for a few minutes to circulate the fluid. |
| 9 | Check the fluid level again and add more fluid if needed. |
| 10 | Turn off the engine and allow it to cool down. |
| 11 | Inspect the fluid for leaks. |

Note: It is important to use the correct type and amount of transmission fluid for your Durango. The correct type of fluid is listed in your owner’s manual. The amount of fluid needed will vary depending on the model of your Durango.

Tools and Materials

The following tools and materials are required to add transmission fluid to a 2014 Dodge Durango:

• Funnel
• 1 quart of transmission fluid (check your owner’s manual for the correct type of fluid)
• Rag
• Wrench

Locating the Transmission Fluid Dipstick

The transmission fluid dipstick is located on the driver’s side of the engine, under the hood. It is a long, metal rod with a yellow cap on the end.

To locate the dipstick, follow these steps:

1. Open the hood of the Durango.
2. Locate the engine.
3. Look for a long, metal rod with a yellow cap on the end. This is the transmission fluid dipstick.

Adding Transmission Fluid

To add transmission fluid to a 2014 Dodge Durango, follow these steps:

1. Park the Durango on a level surface.
2. Turn off the engine and allow it to cool down.
3. Engage the parking brake.
4. Open the hood of the Durango.
5. Locate the transmission fluid dipstick.
6. Remove the dipstick and wipe it clean with a rag.
7. Reinsert the dipstick and pull it out again.
8. Note the level of the transmission fluid. The fluid should be between the “Full” and “Add” marks on the dipstick.
9. If the fluid level is low, add 1 quart of transmission fluid to the reservoir.
10. Reinsert the dipstick and tighten the cap.
11. Start the engine and let it run for a few minutes.
12. Shift the transmission through all of the gears.
13. Turn off the engine.

Adding transmission fluid to a 2014 Dodge Durango is a relatively simple task that can be completed in a few minutes. By following the steps in this guide, you can ensure that your Durango’s transmission is properly lubricated and protected.

Checking the Transmission Fluid Level

The transmission fluid level in your 2014 Dodge Durango should be checked regularly to ensure that it is at the proper level. A low transmission fluid level can cause damage to the transmission, so it is important to check it and add fluid as needed.

To check the transmission fluid level, follow these steps:

1. Park your Durango on a level surface.
2. Engage the parking brake.
3. Lift the hood and locate the transmission fluid dipstick.
4. Remove the dipstick and wipe it clean with a rag.
5. Reinsert the dipstick and pull it out again.
6. The transmission fluid level should be between the “Full” and “Add” marks on the dipstick.

If the transmission fluid level is low, add fluid until it reaches the “Full” mark on the dipstick. Use only the type of transmission fluid specified in your Durango’s owner’s manual.

Adding Transmission Fluid

Adding transmission fluid to your 2014 Dodge Durango is a relatively simple task that can be completed in a few minutes.

To add transmission fluid, follow these steps:

1. Park your Durango on a level surface.
2. Engage the parking brake.
3. Lift the hood and locate the transmission fluid reservoir.
4. Remove the filler cap and add fluid until it reaches the “Full” mark on the dipstick.
5. Replace the filler cap.

Be sure to use only the type of transmission fluid specified in your Durango’s owner’s manual.

Important: Do not overfill the transmission fluid reservoir. Overfilling the transmission fluid can cause damage to the transmission.

Checking and adding transmission fluid to your 2014 Dodge Durango is a simple task that can help to prevent damage to the transmission. By following the steps in this guide, you can keep your Durango running smoothly for years to come.

How much transmission fluid does a 2014 Dodge Durango take?

The 2014 Dodge Durango takes 10 quarts of transmission fluid.

What type of transmission fluid does a 2014 Dodge Durango use?

The 2014 Dodge Durango uses Dexron VI automatic transmission fluid.

How do I check the transmission fluid level on a 2014 Dodge Durango?

To check the transmission fluid level on a 2014 Dodge Durango, follow these steps:

1. Park the vehicle on a level surface.
2. Turn off the engine and allow it to cool down.
3. Engage the parking brake.
4. Locate the transmission fluid dipstick. It is located on the driver’s side of the engine, near the bottom of the transmission.
5. Remove the dipstick and wipe it clean with a rag.
6. Reinsert the dipstick and remove it again.
7. The transmission fluid level should be between the “Full” and “Add” marks on the dipstick.

How do I add transmission fluid to a 2014 Dodge Durango?

To add transmission fluid to a 2014 Dodge Durango, follow these steps:

1. Park the vehicle on a level surface.
2. Turn off the engine and allow it to cool down.
3. Engage the parking brake.
4. Locate the transmission fluid fill hole. It is located on the driver’s side of the engine, near the top of the transmission.
5. Use a funnel to add transmission fluid to the fill hole until the level reaches the “Full” mark on the dipstick.
6. Wipe up any spills with a rag.

What are the symptoms of low transmission fluid in a 2014 Dodge Durango?

The symptoms of low transmission fluid in a 2014 Dodge Durango include:

• Hard shifting
• Slipping gears
• Grinding noises
• Erratic acceleration
• Loss of power

If you notice any of these symptoms, it is important to have your transmission fluid level checked as soon as possible.

What is the best way to maintain the transmission fluid in a 2014 Dodge Durango?

The best way to maintain the transmission fluid in a 2014 Dodge Durango is to:

• Change the transmission fluid according to the manufacturer’s recommendations.
• Use the correct type of transmission fluid.
• Keep the transmission fluid level topped off.
• Avoid driving the vehicle in extreme conditions.
• Inspect the transmission fluid regularly for leaks.

By following these tips, you can help to keep your transmission fluid in good condition and extend the life of your transmission.

In this blog post, we have discussed how to add transmission fluid to a 2014 Dodge Durango. We have covered the following topics:

• The location of the transmission fluid dipstick
• The type of transmission fluid required for a 2014 Dodge Durango
• The steps involved in adding transmission fluid to a 2014 Dodge Durango
• The importance of checking the transmission fluid level regularly

We hope that this blog post has been helpful and that you now feel confident in adding transmission fluid to your 2014 Dodge Durango. If you have any further questions, please do not hesitate to contact your local Dodge dealer.