How To Winterize Outboard Motor 2 Stroke?

How to Winterize Your 2-Stroke Outboard Motor

The winter months can be tough on your outboard motor. With the cold weather and harsh conditions, it’s important to take steps to protect your motor from damage. One of the most important things you can do is winterize your motor properly.

Winterizing your motor involves flushing out the water and oil, and then adding a stabilizer to protect the fuel system. This will help to prevent corrosion and other damage that can occur when your motor is not in use.

In this article, we’ll walk you through the process of winterizing your 2-stroke outboard motor. We’ll provide step-by-step instructions, as well as tips and tricks to help you get the job done right.

So if you’re looking to protect your investment and keep your outboard motor running smoothly for years to come, read on for all the information you need to know about winterizing your 2-stroke outboard motor.

Step	Instructions	Image
1	Remove the spark plugs and pour a teaspoon of oil into each cylinder.
2	Turn the engine over by hand a few times to distribute the oil.
3	Attach a garden hose to the water intake of the motor and turn on the water.
4	Run the engine until the water coming out of the exhaust is clear.
5	Turn off the engine and let it cool down.
6	Remove the drain plug and drain all of the oil from the motor.
7	Replace the drain plug and fill the oil reservoir with fresh oil.
8	Apply a coat of motor oil to the cylinder walls and piston.
9	Cover the carburetor with a plastic bag and secure it with a rubber band.
10	Start the engine and let it run for a few seconds.
11	Turn off the engine and let it cool down.
12	Remove the plastic bag from the carburetor.

How to Winterize Outboard Motor 2 Stroke

Outboard motors are a great way to enjoy the water, but they can be a pain to winterize. If you don’t winterize your outboard motor properly, it can become damaged and eventually stop working.

This guide will show you how to winterize a 2-stroke outboard motor in 6 easy steps. By following these steps, you can protect your outboard motor from the harsh winter weather and keep it running smoothly for years to come.

Step 1: Drain the Fuel Tank

The first step in winterizing your outboard motor is to drain the fuel tank. This will prevent the fuel from going bad and gumming up the engine.

To drain the fuel tank, follow these steps:

1. Remove the fuel tank cap.
2. Place a fuel drain pan under the fuel tank.
3. Open the fuel tank drain valve.
4. Allow the fuel to drain completely.
5. Close the fuel tank drain valve.
6. Replace the fuel tank cap.

Step 2: Change the Oil

The next step is to change the oil. This will help to protect the engine from rust and corrosion.

To change the oil, follow these steps:

1. Remove the oil drain plug.
2. Place an oil drain pan under the oil drain plug.
3. Allow the oil to drain completely.
4. Replace the oil drain plug.
5. Add new oil to the oil fill hole.
6. Check the oil level on the dipstick.

Step 3: Flush the Cooling System

The next step is to flush the cooling system. This will help to remove any dirt or debris that may have accumulated in the system.

To flush the cooling system, follow these steps:

1. Connect a garden hose to the water intake on the outboard motor.
2. Turn on the water hose and allow it to run until the water coming out of the exhaust is clear.
3. Turn off the water hose.

Step 4: Lubricate the Throttle and Shift Cables

The next step is to lubricate the throttle and shift cables. This will help to prevent them from sticking or binding.

To lubricate the throttle and shift cables, follow these steps:

1. Spray a small amount of lubricant onto the throttle and shift cables.
2. Work the cables back and forth to distribute the lubricant evenly.

Step 5: Protect the Spark Plugs

The next step is to protect the spark plugs. This will help to prevent them from corroding.

To protect the spark plugs, follow these steps:

1. Apply a small amount of anti-seize compound to the threads of the spark plugs.
2. Screw the spark plugs into the engine.

Step 6: Cover the Outboard Motor

The final step is to cover the outboard motor. This will help to protect it from the elements.

To cover the outboard motor, follow these steps:

1. Place a cover over the outboard motor.
2. Secure the cover in place with bungee cords or straps.

By following these 6 steps, you can winterize your 2-stroke outboard motor properly and protect it from the harsh winter weather. By doing so, you can keep your outboard motor running smoothly for years to come.

Here are some additional tips for winterizing your outboard motor:

• If you live in an area with extreme cold weather, you may want to remove the spark plugs and pour a small amount of oil into the cylinders. This will help to prevent the pistons from sticking.
• You should also store your outboard motor in a cool, dry place. If you don’t have a place to store it indoors, you can cover it with a tarp or other type of cover.
• Be sure to start your outboard motor and run it for a few minutes before storing it for the winter. This will help to circulate the oil and prevent it from gumming up.

By following these tips, you can winterize your outboard motor properly and keep it running smoothly for years to come.

3. Flush the Cooling System

The cooling system of an outboard motor is responsible for keeping the engine cool. If the cooling system is not properly flushed, it can become clogged with debris and cause the engine to overheat. To flush the cooling system, follow these steps:

1. Connect a garden hose to the water inlet on the outboard motor.
2. Turn on the water hose.
3. Start the outboard motor and let it run for a few minutes.
4. Turn off the outboard motor.
5. Disconnect the garden hose.

The water from the garden hose will flush out any debris that may be clogging the cooling system. It is important to make sure that the water is flowing freely out of the exhaust outlet. If the water is not flowing freely, there may be a blockage in the cooling system.

4. Protect the Outboard Motor

Once the cooling system has been flushed, it is important to protect the outboard motor from the elements. To do this, follow these steps:

1. Apply a coat of anti-freeze to the exposed metal surfaces of the outboard motor.
2. Cover the outboard motor with a protective cover.

The anti-freeze will help to protect the metal surfaces from rust and corrosion. The protective cover will help to keep the outboard motor clean and free from debris.

By following these steps, you can winterize your outboard motor and protect it from the elements. This will help to ensure that your outboard motor is in good working order when you are ready to use it again next season.

Here are some additional tips for winterizing your outboard motor:

• If you live in an area with a cold climate, it is a good idea to remove the spark plugs and pour a small amount of oil into each cylinder. This will help to lubricate the pistons and prevent them from sticking.
• You can also remove the propeller and store it in a safe place.
• Be sure to read the owner’s manual for your outboard motor for specific winterization instructions.

By following these tips, you can help to extend the life of your outboard motor and keep it in good working order for years to come.

How do I winterize my 2-stroke outboard motor?

1. Drain the fuel tank. This is the most important step to prevent fuel from gumming up the carburetor and other components. Be sure to drain the tank completely, including the carburetor bowl.
2. Change the oil. Use a high-quality 2-stroke oil specifically designed for outboard motors.
3. Flush the cooling system. This will help to remove any salt or other contaminants that may have accumulated in the system. Use a freshwater solution and a garden hose to flush the system thoroughly.
4. Apply a corrosion inhibitor to the metal surfaces. This will help to protect the motor from rust and corrosion.
5. Cover the motor. This will help to keep the elements off of the motor and prevent it from drying out.

What if I can’t drain the fuel tank completely?

If you can’t drain the fuel tank completely, you can add a fuel stabilizer to the tank. This will help to prevent the fuel from gumming up the carburetor and other components.

What if I don’t have a garden hose?

If you don’t have a garden hose, you can use a bucket of freshwater to flush the cooling system. Be sure to use enough water to completely flush the system.

What kind of corrosion inhibitor should I use?

You should use a corrosion inhibitor that is specifically designed for outboard motors. These inhibitors are available at most marine supply stores.

What kind of cover should I use for my motor?

You should use a cover that is specifically designed for outboard motors. These covers are available at most marine supply stores.

How long can I leave my outboard motor winterized?

You can leave your outboard motor winterized for up to six months. After six months, you should start the motor and run it for a few minutes to circulate the oil and prevent the seals from drying out.

In this article, we have discussed how to winterize a 2-stroke outboard motor. We covered the steps in detail, from draining the oil and fuel to protecting the engine from corrosion. We also provided tips on how to store your motor properly so that it will be ready to use next season.

By following these steps, you can help to extend the life of your outboard motor and ensure that it is ready to go when you need it most.

Here are some key takeaways from this article:

• Drain the oil and fuel from the engine before storing it for the winter. This will help to prevent the engine from corroding and will also help to keep the fuel from becoming stale.
• Protect the engine from corrosion by applying a corrosion-resistant coating to the exposed metal surfaces. You can also use a fuel stabilizer to help prevent the fuel from becoming stale.
• Store your motor in a cool, dry place. This will help to protect the engine from extreme temperatures and humidity.
• Start the motor and let it run for a few minutes before storing it. This will help to circulate the oil and fuel throughout the engine and will help to prevent the engine from becoming stuck.

By following these tips, you can help to extend the life of your outboard motor and ensure that it is ready to go when you need it most.