How To Solve A Rubik’s Cube Step 7?

Solving a Rubik’s Cube Step 7: The Final Steps

You’ve done it! You’ve solved all six sides of the Rubik’s Cube, except for one: the white side. This is the final step, and it’s also the most difficult. But don’t worry, we’re here to help.

In this step, we’ll show you how to align the white center piece with the other five center pieces. This is done by performing a series of moves called the “White Cross.” Once the white cross is complete, you’ll be able to solve the final layer of the Rubik’s Cube in no time.

So let’s get started!

Step	Instructions	Image
7	Orient the last layer so that the yellow cross is on top. There should be one yellow sticker on each of the four center pieces.

Orient the last layer edges.

The last layer of the Rubik’s Cube is made up of four edges, each of which can be oriented in one of four different ways. In order to solve the last layer, you need to orient all four edges so that they are all facing the same direction.

There are a few different ways to do this, but the most common method is called the “F2L” method. F2L stands for “First Two Layers,” and it refers to the fact that this method solves the first two layers of the Rubik’s Cube at the same time.

To use the F2L method, you first need to find two edges that are already in the correct position. Once you have found two edges, you can insert them into the last layer in the correct orientation.

To insert an edge into the last layer, you need to first make sure that the edge is oriented correctly. The edge should be facing up and the two opposite sides should be the same color.

Once the edge is oriented correctly, you can insert it into the last layer by using the following steps:

1. Hold the Rubik’s Cube in your left hand with the white face up.
2. Find an edge that is already in the correct position. The edge should be facing up and the two opposite sides should be the same color.
3. Use your right hand to hold the edge that you want to insert.
4. Turn the top layer of the Rubik’s Cube so that the edge that you are holding is in the same position as the edge that is already in the correct position.
5. Insert the edge that you are holding into the last layer.

Once you have inserted the edge, you need to rotate the top layer of the Rubik’s Cube so that the edge that you just inserted is in the correct position. To do this, you need to perform the following moves:

• R U R’ U’

This move will rotate the top layer of the Rubik’s Cube 90 degrees clockwise.

Repeat these steps until you have inserted all four edges into the last layer.

Permute the last layer edges.

Once you have oriented all four edges of the last layer, you need to permute them so that they are in the correct order. The last layer of the Rubik’s Cube is made up of four edges, and each edge can be in one of four different positions. In order to solve the last layer, you need to permute the edges so that they are in the following order:

• Top left edge: white
• Top right edge: orange
• Bottom left edge: green
• Bottom right edge: red

There are a few different ways to permute the last layer edges, but the most common method is called the “OLL” method. OLL stands for “Orient Last Layer,” and it refers to the fact that this method solves the orientation of the last layer.

To use the OLL method, you need to first identify which of the four possible edge permutations you have. Once you have identified the permutation, you can use the following algorithms to solve it:

• Permutation 1: R U R’ U’ F’ R U R’ U’ F
• Permutation 2: R U R’ U’ F R U’ R’ U’ F’
• Permutation 3: R U R’ U’ F’ R U R’ U’ (R’ F R’)
• Permutation 4: R U R’ U’ F’ R U R’ U’ (F R F’)

Repeat these algorithms until you have permuted all four edges of the last layer into the correct order.

Once you have permuted the last layer edges, you have solved the Rubik’s Cube!

Orient the last layer corners.

Once you have solved the first two layers of the Rubik’s Cube, you will need to orient the last layer corners. This means that you need to make sure that each corner piece is in the correct position, with the correct colors on top.

To do this, you will need to use a series of algorithms. The algorithms are listed below, along with a description of what they do.

• R U R’ U’: This algorithm will rotate the top layer clockwise.
• F R U R’ F’: This algorithm will rotate the top layer counter-clockwise.
• L’ U’ L: This algorithm will rotate the left layer clockwise.
• R’ F R F’: This algorithm will rotate the right layer clockwise.
• B’ U’ B: This algorithm will rotate the back layer clockwise.
• D’ F’ D F: This algorithm will rotate the bottom layer clockwise.

You will need to use these algorithms in combination to orient the last layer corners. The following steps will walk you through the process:

1. Find a corner piece that is in the correct position, but with the wrong colors on top.
2. Use the R U R’ U’ algorithm to rotate the top layer clockwise until the corner piece is in the correct position.
3. Use the F R U R’ F’ algorithm to rotate the top layer counter-clockwise until the corner piece is in the correct position.
4. Repeat steps 2 and 3 until all of the corners are in the correct position.

Once you have oriented the last layer corners, you will need to permute them. This means that you need to make sure that the corners are in the correct order.

Permute the last layer corners.

To permute the last layer corners, you will need to use a series of algorithms. The algorithms are listed below, along with a description of what they do.

• R U R’ U’ R’ F R F’: This algorithm will swap the two corners in the top left and top right positions.
• R U R’ U’ R’ F’ R U R’ U’ R’ F’: This algorithm will swap the two corners in the top left and bottom right positions.
• R U R’ U’ R’ F’ R U R’ U’ R’ F’ R U R’ U’ R’ F’: This algorithm will swap the two corners in the top left, top right, and bottom right positions.

You will need to use these algorithms in combination to permute the last layer corners. The following steps will walk you through the process:

1. Find two corner pieces that are in the wrong position.
2. Use the R U R’ U’ R’ F R F’ algorithm to swap the two corners.
3. Repeat steps 2 and 3 until all of the corners are in the correct position.

Once you have permuted the last layer corners, you will have solved the Rubik’s Cube!

.

Solving the Rubik’s Cube can be a challenging, but rewarding, task. By following these steps, you can learn how to solve the Rubik’s Cube in no time. With a little practice, you’ll be able to solve the Rubik’s Cube in just a few minutes.

Q: What is the seventh step of solving a Rubik’s Cube?

A: The seventh step of solving a Rubik’s Cube is to permute the last layer edges. This means that you need to arrange the four edges on the last layer so that they are in the correct orientation and position.

Q: How do I permute the last layer edges?

A: There are a few different ways to permute the last layer edges. One common method is to use the following algorithm:

R U R’ U’ R U2 R’ F R2 U’ R’ F’

This algorithm will permute the last layer edges in such a way that the four edges will be in the correct orientation and position.

Q: What do I do if I make a mistake while permuting the last layer edges?

A: If you make a mistake while permuting the last layer edges, you can simply undo the algorithm that you just used and then try again.

Q: What is the next step after permuting the last layer edges?

A: The next step after permuting the last layer edges is to orient the last layer edges. This means that you need to make sure that all of the edges are facing the same direction.

Q: How do I orient the last layer edges?

A: There are a few different ways to orient the last layer edges. One common method is to use the following algorithm:

R U R’ U’ R U2 R’ F R2 U’ R’ F’

This algorithm will orient the last layer edges in such a way that all of the edges will be facing the same direction.

Q: What do I do if I make a mistake while orienting the last layer edges?

A: If you make a mistake while orienting the last layer edges, you can simply undo the algorithm that you just used and then try again.

Q: What is the final step of solving a Rubik’s Cube?

A: The final step of solving a Rubik’s Cube is to align the last layer corners. This means that you need to make sure that all of the corners are in the correct position and orientation.

Q: How do I align the last layer corners?

A: There are a few different ways to align the last layer corners. One common method is to use the following algorithm:

R U R’ U’ R U2 R’ F R2 U’ R’ F’

This algorithm will align the last layer corners in such a way that all of the corners will be in the correct position and orientation.

Q: What do I do if I make a mistake while aligning the last layer corners?

A: If you make a mistake while aligning the last layer corners, you can simply undo the algorithm that you just used and then try again.

Congratulations, you have now solved the Rubik’s Cube! We hope that this step-by-step guide has been helpful. Remember, practice makes perfect, so keep solving and you will eventually be able to do it quickly and easily.

Here are some key takeaways from this guide:

• The basic idea of solving the Rubik’s Cube is to permute the pieces so that each face is a single color.
• The most common method for solving the Rubik’s Cube is the layer-by-layer method.
• Each layer of the Rubik’s Cube is solved independently, starting with the bottom layer.
• The final step is to orient the corners of the top layer correctly.

With a little practice, you will be able to solve the Rubik’s Cube in no time!