How To Reset Change Filter On Ge Refrigerator?

How to Reset the Change Filter Light on a GE Refrigerator

Your GE refrigerator’s water filter is an important part of keeping your water clean and fresh. But when the filter reaches its lifespan, it’s important to replace it to avoid contamination.

Your GE refrigerator will have a light that comes on to let you know when it’s time to change the filter. But what if you accidentally reset the light before you could change the filter? Or what if you just want to know how to reset the light so you can track your filter usage?

In this article, we’ll show you how to reset the change filter light on a GE refrigerator. We’ll also provide some tips on how to choose the right filter for your refrigerator and how to maintain it properly.

So whether you’re a new GE refrigerator owner or you’re just looking for a refresher, read on for all the information you need to know about changing your water filter and resetting the change filter light.

Step	Instructions	Image
1	Locate the water filter housing on the back of your refrigerator.
2	Press the release button on the side of the water filter housing and pull the filter out.
3	Insert the new filter into the housing and push down until it clicks into place.
4	Press the reset button on the front of the refrigerator.
5	Your refrigerator is now ready to use!

How to Reset Change Filter on GE Refrigerator?

Step 1: Locate the water filter

The water filter on a GE refrigerator is located in the back of the refrigerator, near the bottom. It is a cylindrical-shaped object with a blue cap.

Step 2: Turn off the water supply to the refrigerator

Before you can change the water filter, you need to turn off the water supply to the refrigerator. To do this, locate the water supply valve, which is usually located behind the refrigerator. Turn the valve clockwise until it is completely closed.

Step 3: Remove the old water filter

Once the water supply to the refrigerator is turned off, you can remove the old water filter. To do this, grasp the blue cap of the filter and twist it counterclockwise until it comes loose. Be careful not to spill any water.

Step 4: Insert the new water filter

To insert the new water filter, simply twist it clockwise until it is snugly in place. Make sure that the blue cap is aligned with the arrow on the refrigerator.

Step 5: Turn on the water supply to the refrigerator

Once the new water filter is installed, you can turn on the water supply to the refrigerator. To do this, locate the water supply valve and turn it counterclockwise until it is completely open.

Step 6: Flush the water filter

After you have turned on the water supply to the refrigerator, you need to flush the water filter. To do this, run a glass of water through the filter. This will help to remove any impurities that may be in the filter.

Step 7: Enjoy fresh, filtered water!

Now that you have successfully changed the water filter on your GE refrigerator, you can enjoy fresh, filtered water!

Step 3: Remove the old filter

To remove the old filter, follow these steps:

1. Locate the water filter housing. It is typically located on the back of the refrigerator, near the bottom.
2. Remove the housing cover. The cover is usually held in place by a few screws or clips.
3. Remove the old filter. The old filter is typically a cylindrical-shaped object with a blue cap.
4. Discard the old filter. The old filter should be discarded in a recycling bin.

Step 4: Insert the new filter

To insert the new filter, follow these steps:

1. Rinse the new filter under cold water. This will help to remove any dust or debris from the filter.
2. Insert the new filter into the housing. The new filter should fit snugly into the housing.
3. Replace the housing cover. The housing cover is usually held in place by a few screws or clips.
4. Turn on the water supply to the refrigerator. The water supply is usually located on the back of the refrigerator.

Once you have completed these steps, the water filter in your GE refrigerator will be replaced.

Changing the water filter in your GE refrigerator is a simple task that can be completed in a few minutes. By following these steps, you can ensure that your refrigerator is properly filtered and that you are drinking clean, fresh water.

How do I reset the filter light on my GE refrigerator?

1. Locate the filter reset button. The filter reset button is typically located on the inside of the refrigerator door, near the water filter.
2. Press and hold the filter reset button for 3 seconds. The filter light should turn off.
3. Replace the water filter. Make sure to use a GE-approved water filter.

How often do I need to change the filter on my GE refrigerator?

The frequency with which you need to change the filter depends on the type of filter you use and the quality of your water. GE recommends changing the filter every 6 months or 500 gallons of water, whichever comes first.

What happens if I don’t change the filter on my GE refrigerator?

If you don’t change the filter on your GE refrigerator, the water quality may deteriorate. This could lead to a buildup of sediment and bacteria in the water, which could potentially make you sick.

How do I clean the water filter on my GE refrigerator?

You can clean the water filter on your GE refrigerator by following these steps:

1. Turn off the water supply to the refrigerator.
2. Remove the water filter from the refrigerator.
3. Soak the filter in a solution of 1 part white vinegar to 3 parts water for 5 minutes.
4. Rinse the filter thoroughly with water.
5. Replace the filter in the refrigerator.

What if I have a different model of GE refrigerator?

The instructions for resetting, changing, and cleaning the filter on a GE refrigerator may vary depending on the model of refrigerator you have. For specific instructions, please consult your owner’s manual.

changing the filter on your GE refrigerator is a simple task that can be completed in just a few minutes. By following the steps outlined in this guide, you can ensure that your refrigerator is running efficiently and that your food is being properly preserved.

Here are a few key takeaways to remember:

• The filter should be changed every 6 months or 300 days, whichever comes first.
• The filter is located in the back of the refrigerator, behind the water dispenser.
• To change the filter, turn off the power to the refrigerator and disconnect the water supply line.
• Remove the old filter and install the new filter.
• Turn on the power to the refrigerator and reconnect the water supply line.

By following these steps, you can keep your GE refrigerator running smoothly and efficiently for years to come.