How To Remove A Wheel Hub Without A Puller?

How to Remove a Wheel Hub Without a Puller

Your car’s wheel hub is a critical component that connects the wheel to the axle. It’s also a common source of problems, and sometimes it needs to be removed for repairs or replacement. If you don’t have a wheel hub puller, don’t worryyou can still remove the hub without one.

In this article, we’ll show you how to remove a wheel hub without a puller. We’ll provide step-by-step instructions and tips, and we’ll also discuss the tools and materials you’ll need.

So if you’re ever faced with a stuck wheel hub, don’t panicjust follow these instructions and you’ll be back on the road in no time.

Step Instructions Image
1 Jack up the car and support it on jack stands.
2 Remove the lug nuts and wheel.
3 Locate the axle nut. It is usually located on the back of the hub.
4 Use a breaker bar or ratchet to loosen the axle nut.
5 Once the axle nut is loose, you can remove the hub.

A wheel hub is a central part of a vehicle’s suspension system. It connects the wheel to the axle and allows the wheel to rotate. If the wheel hub becomes damaged, it can cause a number of problems, including decreased handling, increased noise, and even a loss of steering control.

In some cases, it may be necessary to remove the wheel hub in order to repair or replace it. This can be a difficult task, but it can be done without a special tool called a hub puller.

This guide will walk you through the steps of removing a wheel hub without a puller. It is important to note that this is a complex procedure and should only be attempted by someone who is comfortable working on cars.

Tools and Materials You Will Need

  • Wrench
  • Hammer
  • Penetrating oil
  • Safety glasses
  • Jack
  • Car ramps
  • Dolly
  • Wheel chocks

Step-by-Step Instructions

1. Prepare the vehicle.

First, you will need to prepare the vehicle for the removal of the wheel hub. This involves raising the vehicle and supporting it on jack stands.

To do this, follow these steps:

  • Park the vehicle on a level surface.
  • Engage the parking brake.
  • Place wheel chocks behind the front wheels.
  • Raise the vehicle with a jack.
  • Place jack stands under the frame of the vehicle, in a position that is safe and secure.
  • Lower the vehicle onto the jack stands.

2. Remove the wheel.

Once the vehicle is supported on jack stands, you can remove the wheel.

To do this, follow these steps:

  • Remove the lug nuts from the wheel.
  • Use a pry bar to loosen the wheel from the hub.
  • Remove the wheel from the vehicle.

3. Locate the hub bolts.

The hub bolts are located on the back of the hub. They are typically 17mm or 19mm bolts.

To locate the hub bolts, follow these steps:

  • Look for a large bolt on the back of the hub.
  • The hub bolts are typically located near the center of the hub.

4. Remove the hub bolts.

Once you have located the hub bolts, you can remove them.

To do this, follow these steps:

  • Use a wrench to loosen the hub bolts.
  • Be careful not to drop the bolts.

5. Apply penetrating oil to the hub.

Once the hub bolts are removed, you will need to apply penetrating oil to the hub. This will help to loosen the hub from the axle.

To do this, follow these steps:

  • Spray penetrating oil onto the hub.
  • Allow the penetrating oil to soak into the hub for a few minutes.

6. Tap the hub with a hammer.

Once the penetrating oil has soaked into the hub, you can tap it with a hammer. This will help to loosen the hub from the axle.

To do this, follow these steps:

  • Hold the hammer in one hand.
  • Use the other hand to tap the hub.
  • Tap the hub in a circular motion.

7. Remove the hub from the axle.

Once the hub is loose, you can remove it from the axle.

To do this, follow these steps:

  • Use a pry bar to pry the hub from the axle.
  • Be careful not to damage the axle.

8. Install the new hub.

Once the old hub is removed, you can install the new hub.

To do this, follow these steps:

  • Apply a thin coat of grease to the hub.
  • Align the hub with the axle.
  • Install the hub bolts.
  • Tighten the hub bolts to the specified torque.

9. Reinstall the wheel.

Once the hub is installed, you can reinstall the wheel.

To do this, follow these steps:

  • Place the wheel on the hub.
  • Install the lug nuts.
  • Tighten the lug nuts to the specified torque.

10. Lower the vehicle.

Once the wheel is installed, you can lower the vehicle.

To do this, follow these steps:

  • Remove the jack stands.
  • Lower the vehicle onto the ground.

Removing a wheel hub without a puller can be a difficult task, but it is possible with the right tools and instructions. By following the steps in this guide, you can safely and successfully remove the wheel hub from your vehicle.

3. Raise the car and support it on jack stands.

Before you can remove the wheel hub, you need to raise the car and support it on jack stands. This will give you enough clearance to work underneath the car and remove the wheel hub.

To raise the car, you will need a jack and jack stands. Follow these steps:

1. Locate the jack points on your car. These are usually located on the front and rear of the car, near the center of the wheel well.
2. Place the jack under the car at one of the jack points. Make sure that the jack is stable and will not tip over.
3. Turn the jack handle to raise the car until it is high enough to clear the ground.
4. Place the jack stands under the car at the same jack points that you used for the jack. Make sure that the jack stands are stable and will not tip over.
5. Slowly lower the car onto the jack stands.

Once the car is supported on the jack stands, you can remove the lug nuts and wheel.

4. Remove the lug nuts and wheel.

To remove the lug nuts and wheel, you will need a lug wrench. Follow these steps:

1. Locate the lug nuts on the wheel. There are usually five lug nuts, one for each wheel stud.
2. Insert the lug wrench into the lug nut closest to you. Turn the lug wrench counterclockwise to loosen the lug nut.
3. Repeat steps 2 and 3 for each lug nut on the wheel.
4. Once all of the lug nuts are loose, remove the wheel from the car.

Now that the wheel is removed, you can access the wheel hub.

In this article, you learned how to remove a wheel hub without a puller. This is a relatively simple task, but it is important to follow the steps carefully to avoid damaging your car. If you are not comfortable working on your car, it is best to have a professional mechanic do the job for you.

How do I remove a wheel hub without a puller?

There are a few different ways to remove a wheel hub without a puller. Here are two methods:

1. Using a hammer and chisel:

  • Place the chisel on the back of the hub, just below the lug nuts.
  • Strike the chisel with a hammer until the hub begins to move.
  • Continue striking the chisel until the hub is completely removed.

2. Using a crowbar:

  • Place the crowbar between the hub and the axle.
  • Pry the hub away from the axle until it is completely removed.

What are the risks of removing a wheel hub without a puller?

There are a few risks associated with removing a wheel hub without a puller. These risks include:

  • Damaging the hub or axle.
  • Causing the hub to become stuck.
  • Injuring yourself.

It is important to weigh the risks and benefits before attempting to remove a wheel hub without a puller. If you are not comfortable with the risks, it is best to have a professional mechanic remove the hub for you.

What tools do I need to remove a wheel hub without a puller?

You will need the following tools to remove a wheel hub without a puller:

  • A hammer
  • A chisel
  • A crowbar
  • A lug wrench
  • A jack
  • Safety glasses

How long does it take to remove a wheel hub without a puller?

It typically takes about 30 minutes to remove a wheel hub without a puller. However, the exact time may vary depending on the make and model of your vehicle.

Is it difficult to remove a wheel hub without a puller?

It can be difficult to remove a wheel hub without a puller, especially if the hub is stuck. However, it is possible to do it with some patience and effort.

What are some tips for removing a wheel hub without a puller?

Here are some tips for removing a wheel hub without a puller:

  • Use a penetrating oil to loosen the hub before you start.
  • Work slowly and carefully to avoid damaging the hub or axle.
  • If the hub is stuck, you may need to apply heat to it to help loosen it.
  • Be careful not to injure yourself.

Can I remove a wheel hub without a puller if my car is stuck?

It is possible to remove a wheel hub without a puller if your car is stuck, but it is important to be careful not to damage the hub or axle. Here are some tips for removing a wheel hub without a puller if your car is stuck:

  • Use a penetrating oil to loosen the hub before you start.
  • Work slowly and carefully to avoid damaging the hub or axle.
  • If the hub is stuck, you may need to apply heat to it to help loosen it.
  • Be careful not to injure yourself.

If you are not comfortable with the risks involved, it is best to have a professional mechanic remove the hub for you.

In this blog post, we have discussed how to remove a wheel hub without a puller. We first discussed the tools and materials you will need. Then, we outlined the steps involved in the process. Finally, we provided some tips and tricks to help you get the job done quickly and easily.

We hope that this blog post has been helpful. If you have any questions, please feel free to leave them in the comments section below.

Author Profile

Carla Denker
Carla Denker
Carla Denker first opened Plastica Store in June of 1996 in Silverlake, Los Angeles and closed in West Hollywood on December 1, 2017. PLASTICA was a boutique filled with unique items from around the world as well as products by local designers, all hand picked by Carla. Although some of the merchandise was literally plastic, we featured items made out of any number of different materials.

Prior to the engaging profile in west3rdstreet.com, the innovative trajectory of Carla Denker and PlasticaStore.com had already captured the attention of prominent publications, each one spotlighting the unique allure and creative vision of the boutique. The acclaim goes back to features in Daily Candy in 2013, TimeOut Los Angeles in 2012, and stretched globally with Allure Korea in 2011. Esteemed columns in LA Times in 2010 and thoughtful pieces in Sunset Magazine in 2009 highlighted the boutique’s distinctive character, while Domino Magazine in 2008 celebrated its design-forward ethos. This press recognition dates back to the earliest days of Plastica, with citations going back as far as 1997, each telling a part of the Plastica story.

After an illustrious run, Plastica transitioned from the tangible to the intangible. While our physical presence concluded in December 2017, our essence endures. Plastica Store has been reborn as a digital haven, continuing to serve a community of discerning thinkers and seekers. Our new mission transcends physical boundaries to embrace a world that is increasingly seeking knowledge and depth.

Similar Posts