How To Remove A Command Strip That Broke?

How to Remove a Command Strip That Broke

Command strips are a convenient way to hang pictures, posters, and other lightweight items without damaging your walls. But what happens if the strip breaks? Don’t worry, you can still remove it without damaging your wall.

In this article, we’ll show you how to remove a command strip that broke in four easy steps. We’ll also provide tips on how to prevent command strips from breaking in the future.

So if you’re ever in a bind, don’t despair. Just follow these steps, and you’ll be able to remove that broken command strip in no time.

Step	Instructions	Image
1	Peel off the backing of the command strip.
2	Gently apply heat to the adhesive with a hair dryer.
3	Slowly peel off the command strip.

Identifying the Type of Command Strip

Before you can remove a broken Command Strip, you need to identify what type of Command Strip it is. There are two main types of Command Strips:

• Reusable Command Strips are made of a strong adhesive that can be removed and reused multiple times.
• Permanent Command Strips are made of a stronger adhesive that is designed to be permanent.

To identify the type of Command Strip you have, look for the following features:

• Reusable Command Strips have a blue strip on the back.
• Permanent Command Strips have a red strip on the back.

You can also check the packaging of the Command Strip to see if it is labeled as “reusable” or “permanent.”

Removing the Broken Command Strip

Once you have identified the type of Command Strip you have, you can begin the removal process.

To remove a reusable Command Strip:

1. Gently pry up one end of the Command Strip with your fingernail or a thin tool.
2. Slowly peel the Command Strip away from the surface, taking care not to damage the surface.
3. If the Command Strip is stuck, apply a small amount of heat to the adhesive with a hair dryer or heat gun.
4. Once the adhesive is softened, gently peel the Command Strip away from the surface.

To remove a permanent Command Strip:

1. Soak a cotton ball in rubbing alcohol.
2. Apply the cotton ball to the Command Strip and let it sit for a few minutes.
3. Use a credit card or other thin tool to gently pry up one end of the Command Strip.
4. Slowly peel the Command Strip away from the surface, taking care not to damage the surface.
5. If the Command Strip is still stuck, apply a little more rubbing alcohol and let it sit for a few more minutes.
6. Repeat steps 3-5 until the Command Strip is completely removed.

Tips for Removing Command Strips

• Be patient. Removing a Command Strip can take some time, so don’t get discouraged if it doesn’t come off easily at first.
• Use a gentle touch. Applying too much force can damage the surface you are removing the Command Strip from.
• If you are having trouble removing a Command Strip, you can try using a commercial adhesive remover. Be sure to follow the directions on the product label.
• Once you have removed the Command Strip, clean the surface with a damp cloth to remove any residue.

Removing a Command Strip that has broken can be a challenge, but it is possible with a little patience and effort. By following the steps in this guide, you can safely and effectively remove your broken Command Strips without damaging your surfaces.

3. Dealing with Any Residue Left Behind

Once you’ve removed the command strip, you may be left with some residue behind. This is usually a sticky residue that can be difficult to remove. However, there are a few simple steps you can take to get rid of it.

First, try using a hair dryer on the residue. The heat from the hair dryer will help to soften the residue, making it easier to remove. Once the residue is softened, you can use a cloth or paper towel to wipe it away.

If the residue is still difficult to remove, you can try using a degreaser. Degreasers are designed to break down grease and oil, so they can be effective at removing stubborn residue. Apply the degreaser to the residue and let it sit for a few minutes. Then, use a cloth or paper towel to wipe away the residue.

You can also try using a magic eraser to remove the residue. Magic erasers are abrasive, so they can be effective at removing stubborn residue. However, be careful not to use too much pressure, as you could damage the surface you’re cleaning.

If you’ve tried all of these methods and the residue is still there, you may need to use a stronger chemical. However, be sure to read the label carefully and follow the directions before using any chemical.

4. Preventing Future Problems

Once you’ve removed the command strip and dealt with any residue, you can take steps to prevent future problems.

First, make sure that the surface you’re attaching the command strip to is clean and dry. This will help to ensure that the command strip sticks properly and doesn’t leave any residue behind.

Second, use the right size command strip for the job. If you use a command strip that’s too small, it may not be able to hold the weight of the item you’re attaching. If you use a command strip that’s too big, it may not stick properly.

Third, don’t over-tighten the command strip. When you tighten the command strip, you’re creating friction between the strip and the surface. This friction can help to keep the strip in place, but if you tighten it too much, you could damage the surface.

Finally, be careful not to remove the command strip too quickly. If you remove the command strip too quickly, you could damage the surface or leave behind residue. Instead, slowly peel the command strip away from the surface.

By following these tips, you can help to prevent future problems with command strips.

How to Remove a Command Strip That Broke?

Q: What are the different ways to remove a Command Strip that broke?

A: There are a few different ways to remove a Command Strip that broke. You can use:

• A hair dryer
• Goo Gone
• Rubbing alcohol
• A utility knife
• A sharp object

Q: How do I use a hair dryer to remove a Command Strip that broke?

A: To use a hair dryer to remove a Command Strip that broke, follow these steps:

1. Turn on the hair dryer and set it to a low heat setting.
2. Hold the hair dryer about 6 inches away from the Command Strip and move it back and forth.
3. Continue to heat the Command Strip until the adhesive starts to loosen.
4. Once the adhesive is loose, carefully peel the Command Strip off the surface.

Q: How do I use Goo Gone to remove a Command Strip that broke?

A: To use Goo Gone to remove a Command Strip that broke, follow these steps:

1. Apply a small amount of Goo Gone to the Command Strip.
2. Let the Goo Gone sit for a few minutes to soften the adhesive.
3. Use a soft cloth to wipe away the Command Strip.

Q: How do I use rubbing alcohol to remove a Command Strip that broke?

A: To use rubbing alcohol to remove a Command Strip that broke, follow these steps:

1. Apply a small amount of rubbing alcohol to the Command Strip.
2. Let the rubbing alcohol sit for a few minutes to soften the adhesive.
3. Use a soft cloth to wipe away the Command Strip.

Q: How do I use a utility knife to remove a Command Strip that broke?

A: To use a utility knife to remove a Command Strip that broke, follow these steps:

1. Carefully insert the blade of the utility knife between the Command Strip and the surface.
2. Use the utility knife to loosen the adhesive.
3. Once the adhesive is loosened, carefully peel the Command Strip off the surface.

Q: How do I use a sharp object to remove a Command Strip that broke?

A: To use a sharp object to remove a Command Strip that broke, follow these steps:

1. Carefully insert the sharp object between the Command Strip and the surface.
2. Use the sharp object to loosen the adhesive.
3. Once the adhesive is loosened, carefully peel the Command Strip off the surface.

Q: What are some tips for removing a Command Strip that broke?

A: Here are some tips for removing a Command Strip that broke:

• Be patient. It may take some time to remove the Command Strip, so don’t rush the process.
• Use a gentle touch. You don’t want to damage the surface you’re removing the Command Strip from.
• Test any cleaning solution on a small, inconspicuous area before using it on the entire Command Strip.
• If you’re having trouble removing the Command Strip, you can try using a professional adhesive remover.

In this article, we have discussed how to remove a Command strip that has broken. We first provided a step-by-step guide on how to remove the strip using a hair dryer. We then discussed some additional methods that you can use if the hair dryer method is not successful. Finally, we provided some tips on how to prevent Command strips from breaking in the future.

We hope that this article has been helpful. If you have any questions, please feel free to leave them in the comments below.