How To Open Top Of Maytag Washer?

How to Open the Top of a Maytag Washer

Your Maytag washer is a workhorse, keeping your clothes clean and fresh day after day. But what happens when you need to access the inside of the washer to clean it or fix a problem? If you’re not sure how to open the top of your Maytag washer, don’t worry, we’re here to help.

In this article, we’ll walk you through the steps on how to open the top of a Maytag washer, so you can get back to doing what you love: washing your clothes.

We’ll also provide some tips on how to keep your washer clean and running smoothly, so you can enjoy years of trouble-free use.

So, without further ado, let’s get started!

Step	Instructions	Image
1	Locate the release latch on the top of the washer. It is a small, black button located near the center of the top panel.
2	Press the release latch and lift up on the top panel.
3	The top panel will now be open. You can now access the inside of the washer to clean it or add detergent, softener, or other laundry products.

Tools and Materials Needed

To open the top of a Maytag washer, you will need the following tools and materials:

• Maytag washer
• Flathead screwdriver
• Phillips head screwdriver
• Wrench
• Rags

Steps to Open the Top of the Maytag Washer

1. Turn off the washer and unplug it from the wall.
2. Locate the two screws on the back of the washer that hold the top in place.
3. Use a flathead screwdriver to loosen the screws.
4. Once the screws are loose, lift up on the top of the washer and remove it.
5. Place the top of the washer on a flat surface.
6. Use a Phillips head screwdriver to remove the four screws that hold the control panel in place.
7. Once the screws are removed, lift up on the control panel and remove it.
8. You can now access the inside of the washer.
9. To replace the top of the washer, reverse the steps above.

Opening the top of a Maytag washer is a relatively simple task that can be completed in a few minutes. By following the steps above, you can safely access the inside of your washer to clean or repair it.

How To Open Top Of Maytag Washer?

Step 1: Locate the release lever

The release lever is located on the front of the washer, near the top. It is a small, rectangular button that is typically black or silver.

Step 2: Press the release lever

Press the release lever down and hold it for a few seconds. The top of the washer will then pop open.

Step 3: Unplug the washer from the wall outlet

Before you can remove the top of the washer, you must first unplug it from the wall outlet. This is a safety precaution to prevent you from getting shocked.

Step 4: Turn off the water supply to the washer

You also need to turn off the water supply to the washer before you can remove the top. This will prevent water from spilling out of the washer when you open it.

Step 5: Remove the top of the washer

Once you have unplugged the washer and turned off the water supply, you can now remove the top. To do this, simply lift up on the top of the washer until it comes free.

Step 6: Replace the top of the washer

To replace the top of the washer, simply reverse the steps above. First, plug the washer back into the wall outlet and turn on the water supply. Then, lower the top of the washer onto the washer until it snaps into place.

By following these steps, you can easily open and replace the top of your Maytag washer. This is a simple task that can be completed in just a few minutes.

How do I open the top of my Maytag washer?

1. Locate the release lever. The release lever is typically located on the front of the washer, near the top. It may be a small button or a lever that you need to push or pull.
2. Press or pull the release lever. This will release the lock on the top of the washer, allowing you to open it.
3. Lift the top of the washer. The top of the washer will be hinged at the back, so you can simply lift it up to open it.

What if the release lever is stuck?

If the release lever is stuck, you can try the following:

1. Try using a different tool. If the release lever is difficult to press or pull, try using a different tool, such as a butter knife or a screwdriver.
2. Apply a little bit of oil. If the release lever is sticking because it is dry, try applying a little bit of oil to the lever.
3. Contact a technician. If you are unable to open the top of the washer, you may need to contact a technician for assistance.

What if I can’t see the release lever?

If you can’t see the release lever, you can try the following:

1. Look for a small hole in the front of the washer. The release lever may be located in a small hole.
2. Feel around the front of the washer. The release lever may be located in a recessed area.
3. Look in the owner’s manual. The owner’s manual may have a diagram of the release lever.

What if I open the top of the washer and the water is still inside?

If you open the top of the washer and the water is still inside, you can try the following:

1. Turn off the washer. Make sure that the washer is turned off before you attempt to drain the water.
2. Check the drain hose. The drain hose may be clogged, preventing the water from draining.
3. Use a wet/dry vacuum to remove the water. If the drain hose is clear, you can use a wet/dry vacuum to remove the water from the washer.
4. Contact a technician. If you are unable to drain the water from the washer, you may need to contact a technician for assistance.

In this blog post, we have discussed how to open the top of a Maytag washer. We have provided step-by-step instructions, as well as images to help you visualize the process. We have also discussed some of the common problems that you may encounter when trying to open the top of your Maytag washer, and how to troubleshoot them.

We hope that this blog post has been helpful. If you have any other questions about how to open the top of your Maytag washer, please do not hesitate to contact us.