How To Reset Filter On Whirlpool Fridge?

How to Reset the Filter on Your Whirlpool Refrigerator

Your Whirlpool refrigerator’s water filter is an important part of keeping your water clean and fresh. But over time, the filter can become clogged with sediment and other impurities, which can reduce the flow of water to your ice maker and water dispenser. To ensure that your refrigerator is providing you with clean, filtered water, it’s important to replace the filter regularly.

In this article, we’ll show you how to reset the filter on your Whirlpool refrigerator. We’ll also provide some tips on how to choose the right filter for your refrigerator and how to maintain it properly.

So whether you’re a new Whirlpool refrigerator owner or you’re just looking for a refresher, read on for all the information you need to know about resetting the filter on your Whirlpool refrigerator.

Step	Instructions	Image
1	Locate the water filter housing on the back of your refrigerator.
2	Press the release button on the side of the housing and pull the filter out.
3	Inspect the filter for any signs of damage or wear. If the filter is damaged, replace it with a new one.
4	Insert the new filter into the housing and push down until it clicks into place.
5	Press the reset button on the housing.
6	Your refrigerator is now ready to use.

How to Reset Filter on Whirlpool Fridge?

Your Whirlpool refrigerator’s water filter helps to remove impurities from your water, such as sediment, chlorine, and other harmful bacteria. Over time, the filter will become clogged and will need to be replaced. When you replace the filter, you will need to reset the filter indicator on your refrigerator. This will tell your refrigerator that a new filter has been installed and that it is ready to use.

Location of the Filter

The filter is located on the back of the fridge, near the bottom. It is a cylindrical-shaped object with a blue cap. The filter is held in place by a metal clip.

How to Remove the Filter

To remove the filter, first unplug the fridge from the wall. Then, use a flathead screwdriver to pry open the metal clip that holds the filter in place. Carefully remove the filter and discard it.

How to Reset the Filter Indicator

Once you have removed the old filter, you will need to reset the filter indicator on your refrigerator. To do this, follow these steps:

1. Press the “Settings” button on the control panel.
2. Use the arrow keys to scroll to the “Water Filter” option.
3. Press the “Enter” button.
4. Press the “Reset” button.

The filter indicator will now be reset and your refrigerator will be ready to use.

Resetting the filter indicator on your Whirlpool refrigerator is a simple process that can be completed in a few minutes. By following these steps, you can ensure that your refrigerator is properly filtering your water and providing you with clean, fresh water.

Here are some additional tips for maintaining your Whirlpool refrigerator:

• Clean the water filter regularly to prevent it from becoming clogged.
• Replace the water filter every 6 months or according to the manufacturer’s instructions.
• Defrost your refrigerator regularly to prevent ice buildup.
• Keep your refrigerator clean and organized to prevent the growth of bacteria.

By following these tips, you can help to keep your Whirlpool refrigerator running smoothly and efficiently.

How To Reset Filter On Whirlpool Fridge?

Whirlpool refrigerators have a built-in water filter that helps to remove impurities from the water that is used to make ice and cold water. The filter needs to be replaced regularly, and when it is replaced, the filter light on the refrigerator will come on to indicate that the filter needs to be reset.

This guide will show you how to reset the filter light on a Whirlpool refrigerator.

1. Locate the Water Filter

The water filter is located on the back of the refrigerator, near the bottom. It is a cylindrical-shaped filter that is about 10 inches long and 2 inches in diameter.

2. Remove the Old Filter

To remove the old filter, first turn off the water supply to the refrigerator. This can be done by turning the shut-off valve located under the sink.

Once the water supply is turned off, you can remove the old filter by unscrewing it counterclockwise. Be careful not to spill any water.

3. Rinse the Filter Housing

Once the old filter is removed, rinse the filter housing with cold water. This will help to remove any sediment or debris that may have accumulated in the housing.

4. Insert the New Filter

To insert the new filter, first rinse it under cold water. Then, insert the filter into the housing until it clicks into place.

Secure the filter in place with the metal clip.

5. Turn on the Water Supply

Once the new filter is installed, you can turn on the water supply to the refrigerator. The filter light should turn off, indicating that the filter has been reset.

6. Test the Water

After you have reset the filter light, you should test the water to make sure that it is clean and free of impurities. You can do this by running a glass of water from the refrigerator and checking for any sediment or debris.

If the water is clear and free of impurities, then the filter has been successfully reset.

Resetting the filter light on a Whirlpool refrigerator is a simple process that can be completed in a few minutes. By following the steps in this guide, you can ensure that your refrigerator is filtering your water properly and providing you with clean, fresh water.

How do I reset the filter on my Whirlpool refrigerator?

1. Locate the water filter. The water filter is typically located in the door of your refrigerator, near the bottom.
2. Remove the water filter. To remove the filter, twist it counterclockwise until it comes loose.
3. Insert the new water filter. Insert the new filter into the housing, making sure that it is aligned correctly.
4. Turn the filter clockwise until it is snug.
5. Press the reset button. The reset button is typically located on the back of the refrigerator, near the water filter housing. Press the button to reset the filter.
6. Run water from the refrigerator dispenser for 30 seconds to flush the new filter.

What happens if I don’t reset the filter on my Whirlpool refrigerator?

If you don’t reset the filter on your Whirlpool refrigerator, you may experience:

• Reduced water flow from the dispenser
• Water that tastes or smells bad
• Damage to your refrigerator’s water system

How often should I change the filter on my Whirlpool refrigerator?

The frequency with which you should change the filter on your Whirlpool refrigerator depends on the quality of your water. If you have hard water, you may need to change the filter more often than if you have soft water.

Generally, you should change the filter on your Whirlpool refrigerator every 6 months. However, you may need to change the filter more often if you:

• Use your refrigerator frequently
• Have a large family
• Live in an area with hard water

What are the signs that my water filter needs to be changed?

There are a few signs that your water filter may need to be changed, including:

• Reduced water flow from the dispenser
• Water that tastes or smells bad
• A build-up of sediment or debris in the water filter housing

If you notice any of these signs, it’s time to change your water filter.

How do I clean the water filter on my Whirlpool refrigerator?

You can clean the water filter on your Whirlpool refrigerator by following these steps:

1. Locate the water filter. The water filter is typically located in the door of your refrigerator, near the bottom.
2. Remove the water filter. To remove the filter, twist it counterclockwise until it comes loose.
3. Soak the filter in a solution of 1 part white vinegar to 3 parts water for 5 minutes.
4. Rinse the filter thoroughly with water.
5. Insert the filter back into the housing.
6. Turn the filter clockwise until it is snug.

What if I can’t find the water filter on my Whirlpool refrigerator?

If you can’t find the water filter on your Whirlpool refrigerator, you can consult the owner’s manual for your specific model. You can also contact Whirlpool customer service for assistance.

resetting the filter on your Whirlpool fridge is a simple task that can be completed in just a few minutes. By following the steps outlined in this article, you can ensure that your fridge is properly filtering water and providing you with clean, fresh water to drink and cook with.

Here are a few key takeaways to remember:

• The filter on your Whirlpool fridge should be replaced every 6 months.
• To reset the filter, locate the filter reset button on the inside of the fridge door.
• Press and hold the button for 3 seconds until the light turns off.
• Your fridge is now reset and ready to use.

By following these simple steps, you can keep your Whirlpool fridge running efficiently and ensure that you are always drinking clean, fresh water.