How To Detach Thomasville Sectional?

How to Detach a Thomasville Sectional

If you’re looking to move your Thomasville sectional, or simply want to give it a makeover, you may need to detach the pieces. Detaching a Thomasville sectional is a relatively simple process, but there are a few things you need to know in order to do it correctly. In this article, we’ll walk you through the steps of detaching a Thomasville sectional, so you can get the job done quickly and easily.

We’ll start by discussing the different types of Thomasville sectionals and how to identify which type you have. Then, we’ll give you step-by-step instructions on how to detach each type of sectional. Finally, we’ll provide some tips on how to reattach your sectional once you’re finished.

So, if you’re ready to learn how to detach a Thomasville sectional, read on!

Step	Instructions	Image
1	Locate the release levers on the underside of the sectional.
2	Press down on the release levers and pull the sections apart.
3	Repeat steps 1 and 2 for each section of the sectional.

**

This guide will show you how to detach a Thomasville sectional. This process is relatively simple, but it does require some basic tools and skills. By following these steps, you can easily detach your sectional and move it to a new location or store it for the winter.

Tools and Materials

• Phillips head screwdriver
• Flathead screwdriver
• Tape measure
• Level
• Pencil
• Safety glasses

Identifying the Seams

The seams on a Thomasville sectional are typically located along the back, sides, and bottom of the sofa. The seams are typically hidden by a decorative trim, so you may need to remove the trim to find them.

To remove the trim, use a flathead screwdriver to pry it up from the edge of the sofa. Once you have pried up the trim, you should be able to see the seams underneath.

Mark the seams with a pencil so that you can easily find them again later.

Detaching the Sections

Once you have identified the seams, you can begin to detach the sections of the sofa. To do this, you will need to use a Phillips head screwdriver to remove the screws that hold the sections together.

The screws are typically located along the back and sides of the sofa. Start by removing the screws from the back of the sofa. Once you have removed the screws, you should be able to separate the back section from the seat section.

Repeat this process for the other sections of the sofa. Once you have detached all of the sections, you should be able to move the sofa to a new location or store it for the winter.

Detaching a Thomasville sectional is a relatively simple process. By following these steps, you can easily detach your sectional and move it to a new location or store it for the winter.

Here are some additional tips for detaching a Thomasville sectional:

• Be careful not to damage the fabric or upholstery of the sofa.
• Work slowly and methodically.
• If you are having trouble, ask for help from a friend or family member.

With a little patience and effort, you can easily detach your Thomasville sectional and move it to a new location.

Additional Resources

• [How to Detach a Sectional Sofa](https://www.thesprucecrafts.com/how-to-detach-a-sectional-sofa-598543)
• [How to Disassemble a Sectional Sofa](https://www.wikihow.com/Disassemble-a-Sectional-Sofa)
• [How to Move a Sectional Sofa](https://www.moving.com/tips/how-to-move-a-sectional-sofa/)

3. Detaching the Sections

To detach the sections of your Thomasville sectional, you will need the following tools:

• A Phillips head screwdriver
• A flathead screwdriver
• A pry bar or a flathead screwdriver

1. Start by removing the cushions from the sofa. This will give you access to the screws and tabs that hold the sections together.
2. Use the Phillips head screwdriver to remove the screws that hold the sections together. These screws are typically located on the back of the sofa, near the bottom.
3. Use the flathead screwdriver to pry open the tabs that hold the sections together. These tabs are typically located on the sides of the sofa, near the top.
4. Be careful not to damage the fabric or wood of the sofa.

Once you have removed all of the screws and tabs, you should be able to detach the sections of your Thomasville sectional.

4. Reattaching the Sections

To reattach the sections of your Thomasville sectional, you will need the following tools:

• A Phillips head screwdriver
• A flathead screwdriver
• A pry bar or a flathead screwdriver

1. Reattach the sections in the reverse order that you removed them.
2. Make sure that the screws are tight and that the tabs are properly aligned.
3. Replace the cushions on the sofa.

Once you have reattached the sections of your Thomasville sectional, you should be able to enjoy your sofa for many years to come.

Detaching and reattaching the sections of your Thomasville sectional is a relatively simple process. By following the steps in this guide, you can easily complete this task without damaging your sofa.

If you have any questions or concerns, please do not hesitate to contact Thomasville customer service.

Here are some additional tips for detaching and reattaching the sections of your Thomasville sectional:

• Be careful not to overtighten the screws. This could damage the wood of the sofa.
• If the tabs are difficult to pry open, you can use a pry bar or a flathead screwdriver to help you.
• Make sure that the cushions are properly aligned before you replace them. This will help to prevent the sections from shifting out of place.

By following these tips, you can easily detach and reattach the sections of your Thomasville sectional.

How do I detach a Thomasville sectional?

1. Unfasten the seat cushions. Most Thomasville sectionals have seat cushions that are attached to the frame with either buttons or snaps. To unfasten the cushions, start by flipping them over. Then, locate the buttons or snaps and use a seam ripper or other sharp object to carefully pry them open. Once the buttons or snaps are removed, the cushions can be lifted off of the frame.
2. Remove the back cushions. The back cushions on a Thomasville sectional are typically attached to the frame with either zippers or Velcro. To remove the cushions, start by finding the zipper or Velcro closure. Then, unzip the zipper or peel back the Velcro to open the closure. Once the closure is open, the cushions can be lifted off of the frame.
3. Detach the arms. The arms on a Thomasville sectional are typically attached to the frame with either bolts or screws. To detach the arms, start by finding the bolts or screws that hold them in place. Then, use a screwdriver to remove the bolts or screws. Once the bolts or screws are removed, the arms can be lifted off of the frame.
4. Detach the legs. The legs on a Thomasville sectional are typically attached to the frame with either bolts or screws. To detach the legs, start by finding the bolts or screws that hold them in place. Then, use a screwdriver to remove the bolts or screws. Once the bolts or screws are removed, the legs can be lifted off of the frame.

What tools do I need to detach a Thomasville sectional?

You will need the following tools to detach a Thomasville sectional:

• A seam ripper or other sharp object
• A screwdriver

**How long does it take to detach a Thomasville sectional?

It will typically take about 30 minutes to detach a Thomasville sectional. The exact amount of time will vary depending on the size and complexity of the sectional.

**What if I can’t detach my Thomasville sectional?

If you are unable to detach your Thomasville sectional, you can contact Thomasville customer service for assistance. You can reach Thomasville customer service by calling 1-800-448-6486 or visiting their website at www.thomasvillefurniture.com.

In this article, we have discussed how to detach a Thomasville sectional. We have provided step-by-step instructions on how to remove the cushions, the backs, and the legs. We have also provided tips on how to reassemble the sectional. We hope that this article has been helpful. If you have any questions, please do not hesitate to contact us.