How To Clean Old Whirlpool Dishwasher Filter?

How to Clean Your Old Whirlpool Dishwasher Filter

Your dishwasher’s filter is an important part of keeping your dishes clean and your dishwasher running efficiently. It traps food particles and other debris that can clog your dishwasher and prevent it from working properly. But over time, the filter can become clogged with grease, food, and other gunk, which can make it difficult to clean.

If you don’t clean your dishwasher filter regularly, it can eventually lead to problems with your dishwasher, such as poor cleaning performance, a buildup of odors, and even damage to your dishwasher. So how do you clean an old Whirlpool dishwasher filter? It’s actually pretty simple.

In this article, we’ll walk you through the steps on how to clean your old Whirlpool dishwasher filter. We’ll also provide some tips on how to prevent your filter from becoming clogged in the future.

So if you’re ready to learn how to clean your old Whirlpool dishwasher filter, read on!

Step	Instructions	Image
1	Open the dishwasher door and locate the filter. It is usually located in the bottom of the dishwasher, near the drain.
2	Remove the filter by gently pulling it out.
3	Rinse the filter under warm water to remove any food particles or debris.
4	If the filter is heavily soiled, you can soak it in a solution of warm water and dish soap for a few minutes.
5	Rinse the filter thoroughly and dry it with a towel.
6	Reinsert the filter into the dishwasher.

Location of the Filter

The filter in a Whirlpool dishwasher is located at the bottom of the dishwasher, underneath the lower spray arm. It is a round, white plastic disk with a series of holes in it.

To remove the filter, you will need to:

1. Open the door to the dishwasher.
2. Reach under the lower spray arm and locate the filter.
3. Grasp the handle on the top of the filter and pull it straight up.
4. The filter will come out of the dishwasher.

How to Clean the Filter

To clean the filter, you will need:

• A bowl of warm water
• A sponge
• A bottle of dish soap

1. Fill the bowl with warm water.
2. Add a few drops of dish soap to the water.
3. Dip the sponge into the soapy water and scrub the filter.
4. Rinse the filter under running water.
5. Dry the filter with a towel.

Cleaning the filter in your Whirlpool dishwasher is an important part of keeping your dishwasher running efficiently. By following these steps, you can keep your dishwasher clean and free of debris, which will help to ensure that your dishes come out clean and sparkling every time.

Additional Tips

• You should clean the filter in your Whirlpool dishwasher every month or two to prevent buildup of food and debris.
• If the filter is heavily clogged, you may need to soak it in a bowl of warm, soapy water for a few minutes before scrubbing it.
• If you have hard water, you may need to clean the filter more often to prevent mineral buildup.
• You can also purchase a dishwasher filter cleaner to help keep your filter clean and free of debris.

How to Clean an Old Whirlpool Dishwasher Filter

Your Whirlpool dishwasher’s filter traps food particles, grease, and other debris from your dishes. Over time, this debris can build up and clog the filter, preventing your dishwasher from draining properly. Cleaning the filter regularly will help to keep your dishwasher running smoothly and efficiently.

Steps to Clean the Filter

1. Turn off the dishwasher and unplug it from the outlet.
2. Open the dishwasher door and locate the filter. The filter is usually located in the bottom of the dishwasher, near the drain.
3. Remove the filter by gently pulling it up and out of the dishwasher.
4. Rinse the filter under warm water to remove any loose debris.
5. Use a toothbrush or other small brush to clean any stubborn debris from the filter.
6. Rinse the filter again under warm water.
7. Replace the filter in the dishwasher.
8. Turn on the dishwasher and run a cycle with no dishes in it. This will help to dry the filter and prevent any bacteria from growing.

How Often to Clean the Filter

You should clean the filter in your Whirlpool dishwasher every month or two. If you use your dishwasher frequently, you may need to clean the filter more often.

What Happens if the Filter is Not Cleaned Regularly?

If the filter in your Whirlpool dishwasher is not cleaned regularly, it can become clogged with debris. This can prevent your dishwasher from draining properly, which can lead to a number of problems, including:

• Smelly dishwasher: A clogged filter can trap food particles and bacteria, which can cause your dishwasher to smell bad.
• Dishes not getting clean: If your dishwasher is not draining properly, the water will not be able to circulate properly, which can prevent your dishes from getting clean.
• Damage to the dishwasher: A clogged filter can put extra strain on the dishwasher’s motor, which can eventually lead to damage to the appliance.

Troubleshooting

If you clean the filter in your Whirlpool dishwasher regularly and it is still dirty or your dishwasher is not draining properly, there may be another problem with the appliance. Here are a few things to check:

• Check the drain hose: The drain hose can become clogged with debris, which can prevent the dishwasher from draining properly. To check the drain hose, disconnect it from the dishwasher and clean it with a hose.
• Check the air gap: The air gap is a small pipe that connects the dishwasher to the sink drain. It helps to prevent water from backing up into the dishwasher. If the air gap is clogged, it can prevent the dishwasher from draining properly. To check the air gap, remove the cover and clean it with a brush.
• Check the dishwasher’s pump: The pump is responsible for draining the water from the dishwasher. If the pump is clogged, it can prevent the dishwasher from draining properly. To check the pump, remove the access panel on the bottom of the dishwasher and look for any debris. If you see any debris, remove it with a small brush.

If you have checked all of these things and your dishwasher is still not draining properly, you may need to call a qualified technician for help.

Cleaning the filter in your Whirlpool dishwasher is an important part of keeping your appliance running smoothly and efficiently. By following these steps, you can help to prevent problems with your dishwasher and keep your dishes clean.

How do I clean the filter in my Whirlpool dishwasher?

1. Turn off the dishwasher and unplug it from the power outlet.
2. Open the door and locate the filter. The filter is usually located at the bottom of the dishwasher, near the drain.
3. Remove the filter by gently pulling it out.
4. Rinse the filter under warm water. Be sure to remove any food particles or debris that may be stuck to the filter.
5. Dry the filter completely with a towel.
6. Reinsert the filter into the dishwasher.
7. Turn on the dishwasher and run a cycle with no dishes. This will help to clean any residual water or debris from the filter.

How often should I clean the filter in my Whirlpool dishwasher?

The frequency with which you clean the filter in your Whirlpool dishwasher will depend on how often you use it. If you use your dishwasher daily, you should clean the filter once a week. If you use your dishwasher less frequently, you can clean the filter once a month.

What can I use to clean the filter in my Whirlpool dishwasher?

You can clean the filter in your Whirlpool dishwasher with warm water and a mild detergent. You can also use a descaling solution, such as white vinegar or lemon juice. Be sure to rinse the filter thoroughly after cleaning it.

What happens if I don’t clean the filter in my Whirlpool dishwasher?

If you don’t clean the filter in your Whirlpool dishwasher, it can become clogged with food particles and debris. This can prevent the dishwasher from draining properly and can also lead to a buildup of bacteria. If the filter is too clogged, it can also damage the dishwasher’s pump.

How do I know if the filter in my Whirlpool dishwasher needs to be cleaned?

There are a few signs that the filter in your Whirlpool dishwasher needs to be cleaned. These include:

• The dishwasher is not draining properly.
• The dishwasher is making a gurgling or humming noise.
• There is a buildup of food particles or debris in the bottom of the dishwasher.
• The dishwasher is not cleaning dishes as well as it used to.

If you notice any of these signs, it’s a good idea to clean the filter.

cleaning your Whirlpool dishwasher filter is a simple task that can help to improve the performance of your dishwasher and extend its lifespan. By following the steps outlined in this article, you can easily remove and clean your filter in just a few minutes. Be sure to clean your filter regularly to keep your dishwasher running smoothly and efficiently.