How To Change Gojo Soap Dispenser?

How to Change a Gojo Soap Dispenser

Gojo soap dispensers are a convenient way to keep your hands clean, but they can be a pain to change the soap when it runs out. This guide will show you how to change a Gojo soap dispenser quickly and easily, so you can keep your hands clean and your dispenser full.

Steps:

1. Turn off the water supply to the dispenser. This is usually located under the sink.
2. Remove the old soap cartridge. To do this, unscrew the cap on the bottom of the dispenser and pull out the cartridge.
3. Insert the new soap cartridge. Make sure that the cartridge is inserted all the way into the dispenser.
4. Turn on the water supply to the dispenser. The soap should start to flow out of the dispenser.
5. Test the dispenser. Make sure that the soap is flowing out of the dispenser properly.

Step	Instructions	Image
1	Turn off the water supply to the soap dispenser.
2	Remove the soap dispenser from the wall.
3	Remove the old soap cartridge.
4	Insert the new soap cartridge into the dispenser.
5	Reattach the soap dispenser to the wall.
6	Turn on the water supply to the soap dispenser.

Tools and Materials Needed

To change the Gojo soap dispenser, you will need the following tools and materials:

• A Phillips head screwdriver
• A flathead screwdriver
• A new Gojo soap dispenser
• A bucket or container to catch the old soap
• Paper towels

Step-by-Step Instructions

1. Turn off the water supply to the soap dispenser. This is usually located at the back of the dispenser.
2. Remove the old soap dispenser. To do this, you will need to unscrew the two Phillips head screws that are located at the back of the dispenser. Once the screws are removed, you can pull the dispenser away from the wall.
3. Clean the area where the soap dispenser was installed. Use a damp paper towel to wipe away any soap residue or dirt.
4. Install the new soap dispenser. To do this, you will need to align the holes in the new dispenser with the screws in the wall. Once the holes are aligned, you can screw the new dispenser into place.
5. Turn on the water supply to the soap dispenser. This will allow the soap to flow through the dispenser.
6. Test the soap dispenser. Press the dispenser to make sure that the soap is flowing properly.

Changing the Gojo soap dispenser is a simple task that can be completed in just a few minutes. By following these steps, you can ensure that your soap dispenser is working properly and that you are always supplied with fresh soap.

How to Change Gojo Soap Dispenser

Gojo soap dispensers are a convenient way to keep your hands clean, but they can also be a pain to refill. If your Gojo soap dispenser is running low on soap, or if the soap is starting to look cloudy, it’s time to change the cartridge.

Changing the Gojo soap cartridge is a simple process, and it only takes a few minutes. Here’s how to do it:

1. Turn off the water supply to the sink. This will prevent any water from spilling out when you remove the old cartridge.
2. Locate the soap dispenser. The soap dispenser is usually located under the sink. It’s a small, white container with a blue cap.
3. Remove the old cartridge. To remove the old cartridge, unscrew the blue cap. The cartridge will come out with the cap.
4. Insert the new cartridge. Insert the new cartridge into the soap dispenser. Make sure that the cartridge is inserted all the way in.
5. Turn on the water supply to the sink. This will allow water to flow into the soap dispenser.
6. Test the soap dispenser. Press the soap dispenser to make sure that the soap is flowing out.

That’s it! You’ve now successfully changed the Gojo soap cartridge.

Troubleshooting

If you’re having trouble changing the Gojo soap cartridge, here are a few troubleshooting tips:

• Make sure that you’re turning off the water supply to the sink before you start.
• Make sure that you’re using the correct type of cartridge. The Gojo soap dispenser uses a specific type of cartridge, so you can’t use just any old cartridge.
• Make sure that the cartridge is inserted all the way into the soap dispenser. If the cartridge isn’t inserted all the way in, it won’t work properly.
• If you’re still having trouble, you can contact Gojo customer service for help.

Tips and Tricks

Here are a few tips and tricks for changing the Gojo soap cartridge:

• To make it easier to remove the old cartridge, soak it in hot water for a few minutes before you try to unscrew it.
• If the new cartridge is difficult to insert, you can use a little bit of dish soap to lubricate it.
• To prevent the soap from getting cloudy, make sure that you clean the soap dispenser regularly.
• If you’re not going to be using the soap dispenser for a long period of time, you can empty the soap out and store the cartridge in a cool, dry place.

By following these tips and tricks, you can make changing the Gojo soap cartridge a breeze.

Changing the Gojo soap cartridge is a simple process that only takes a few minutes. By following these steps, you can keep your Gojo soap dispenser working properly and ensure that your hands are always clean.

How do I change the soap cartridge in a Gojo soap dispenser?

1. Turn off the water supply to the dispenser. This is usually located at the back of the dispenser.
2. Remove the soap cartridge. To do this, press down on the release button on the bottom of the cartridge and pull it out.
3. Insert the new soap cartridge. Make sure that the cartridge is inserted all the way into the dispenser.
4. Turn on the water supply to the dispenser. The soap dispenser will now be ready to use.

What type of soap do I use in a Gojo soap dispenser?

Gojo soap dispensers are designed to use Gojo hand soap. However, you can also use other types of liquid soap, as long as it is not too thick.

How often do I need to change the soap cartridge in my Gojo soap dispenser?

The frequency with which you need to change the soap cartridge will depend on how often the dispenser is used. However, as a general rule, you should change the cartridge every 2-3 weeks.

What do I do if the soap dispenser is not dispensing soap?

There are a few possible reasons why your soap dispenser may not be dispensing soap. Here are a few things to check:

• Is the soap dispenser turned on? Make sure that the power switch is turned to the “On” position.
• Is the soap cartridge inserted correctly? Make sure that the soap cartridge is inserted all the way into the dispenser.
• Is the soap cartridge clogged? If the soap cartridge is clogged, you can try to clear it by running hot water over it.
• Is the water supply to the dispenser turned on? Make sure that the water supply to the dispenser is turned on.

If you have checked all of these things and the soap dispenser is still not dispensing soap, you may need to contact a qualified plumber for assistance.

How do I clean a Gojo soap dispenser?

To clean a Gojo soap dispenser, you will need:

• A mild detergent
• A sponge or cloth
• A bucket of water

1. Turn off the water supply to the dispenser.
2. Remove the soap cartridge.
3. Fill a bucket with warm water and add a few drops of mild detergent.
4. Wipe down the inside and outside of the dispenser with the sponge or cloth.
5. Rinse the dispenser with clean water.
6. Reinsert the soap cartridge and turn on the water supply.

Your Gojo soap dispenser is now clean and ready to use.

Changing a Gojo soap dispenser is a simple task that can be completed in a few minutes. By following the steps in this guide, you can ensure that your dispenser is working properly and that you are getting the most out of your soap.

Here are the key takeaways from this guide:

• To change a Gojo soap dispenser, you will need to remove the old soap cartridge, insert the new cartridge, and replace the cap.
• The old soap cartridge can be removed by pressing down on the release button and pulling the cartridge out.
• The new soap cartridge can be inserted by pushing it down into the dispenser until it clicks into place.
• The cap can be replaced by pushing it down onto the dispenser until it snaps into place.

By following these steps, you can easily change your Gojo soap dispenser and keep your hands clean and healthy.