How To Turn Off Automatic High Beams Jeep Grand Cherokee?

How to Turn Off Automatic High Beams on a Jeep Grand Cherokee

Driving at night can be dangerous, especially in rural areas with little lighting. That’s why many new cars come equipped with automatic high beams, which automatically turn on when it’s dark and turn off when it’s light enough. While this feature can be helpful, it can also be annoying if you find yourself constantly having to turn your high beams off and on.

If you’re a Jeep Grand Cherokee owner, you’re in luck. Turning off the automatic high beams on your Jeep Grand Cherokee is a simple process. Just follow these steps:

1. Turn the ignition switch to the “ON” position.
2. Press and hold the “LIGHT” button on the instrument panel.
3. While holding the “LIGHT” button, press the “HIGH BEAM” button once.
4. Release both buttons.

The automatic high beams will now be turned off. You can verify this by looking at the instrument panel. If the high beam indicator light is off, then the automatic high beams are disabled.

Keep in mind that you’ll need to repeat these steps every time you start your Jeep Grand Cherokee if you want to keep the automatic high beams turned off.

Step	Action	Explanation
1	Turn the ignition switch to the “On” position.	This will power on the vehicle’s electrical system.
2	Press and hold the “Automatic High Beams” button on the steering wheel.	This will turn off the automatic high beams.
3	Release the “Automatic High Beams” button.	The automatic high beams will now be turned off.

Step 1: Locate the Automatic High Beams Switch

The automatic high beams switch is located on the left side of the steering column, just below the turn signal lever. It is a small, round switch with two positions: “Auto” and “Off.”

Step 2: Turn Off the Automatic High Beams

To turn off the automatic high beams, simply move the switch to the “Off” position. The switch will make a clicking sound when it is turned off.

Here are some additional tips for using the automatic high beams:

• The automatic high beams will only turn on when it is dark outside and when you are driving over 40 mph.
• The automatic high beams will turn off automatically when you turn the steering wheel or when you apply the brakes.
• You can override the automatic high beams by manually turning on the high beams.
• If you are driving in a tunnel or under a bridge, the automatic high beams will turn off automatically to avoid blinding other drivers.

If you have any questions about the automatic high beams, you can consult your Jeep Grand Cherokee owner’s manual.

The automatic high beams on the Jeep Grand Cherokee are a convenient feature that can help you to see better at night. However, it is important to know how to turn them off so that you do not blind other drivers. By following the steps in this article, you can easily turn off the automatic high beams on your Jeep Grand Cherokee.

Step 3: Test the Automatic High Beams

Once you have turned off the automatic high beams, you will need to test them to make sure they are working properly. To do this, follow these steps:

1. Turn on your headlights.
2. Turn on the automatic high beams.
3. Drive at night on a dark road.
4. Increase your speed gradually.

As you increase your speed, the automatic high beams should automatically turn on. If they do not turn on, you may need to reset the automatic high beams.

Step 4: Reset the Automatic High Beams

If the automatic high beams are not working properly, you may need to reset them. To do this, follow these steps:

1. Turn off the ignition.
2. Wait for 5 seconds.
3. Turn on the ignition.
4. Turn on the headlights.
5. Turn on the automatic high beams.
6. Drive at night on a dark road.

As you increase your speed, the automatic high beams should automatically turn on. If they do not turn on, you may need to take your Jeep Grand Cherokee to a dealer for service.

In this article, we have shown you how to turn off the automatic high beams on a Jeep Grand Cherokee. We have also shown you how to test the automatic high beams and how to reset them if they are not working properly. If you have any other questions about the automatic high beams on your Jeep Grand Cherokee, you can consult your owner’s manual or contact a dealer for assistance.

How do I turn off automatic high beams on my Jeep Grand Cherokee?

1. Step 1: Press the stalk on the left side of the steering wheel. This will activate the turn signal.
2. Step 2: Press the stalk up or down. This will turn the high beams on or off.
3. Step 3: Press the stalk again to turn off the turn signal.

How do I turn off automatic high beams on my Jeep Grand Cherokee permanently?

1. Step 1: Open the driver’s side door and locate the fuse box. It is usually located under the dashboard on the driver’s side.
2. Step 2: Find the fuse labeled “High Beams.” It is usually a small, rectangular fuse.
3. Step 3: Pull the fuse out of the fuse box. This will disable the automatic high beams.
4. Step 4: Replace the fuse cover.

What are the benefits of using automatic high beams?

• Automatic high beams can help you see better at night by illuminating the road ahead of you.
• Automatic high beams can also help you avoid accidents by making it easier for other drivers to see you.
• Automatic high beams can be especially helpful on dark roads or in rural areas.

What are the drawbacks of using automatic high beams?

• Automatic high beams can be distracting to other drivers.
• Automatic high beams can also cause glare for oncoming drivers.
• Automatic high beams can be dangerous if they are not used correctly.

When should I not use automatic high beams?

You should not use automatic high beams when:

• There are other cars on the road.
• There are oncoming cars.
• There are pedestrians or cyclists nearby.
• The weather is bad (rain, snow, fog).
• You are driving in a tunnel.

  In this blog post, we have discussed how to turn off automatic high beams on a Jeep Grand Cherokee. We have covered the steps involved in turning off the automatic high beams manually, as well as how to turn them off using the steering wheel controls. We have also provided some tips on how to troubleshoot problems with the automatic high beams. We hope that this information has been helpful.